Logan
03-13-2011, 10:34 AM
Hey everyone, I have a very neat set of Hayashi 505 for sale!
I measured the backspacing with a ruler and a straight edge, so the offset will be +/- 5mm. I feel like I am very close though.
Specs:
5x114.3
Hub- I can measure, but it clears my 240sx hubs just fine!
17x9.5 et-40. Yes, -40. Test fitting on my S13, over fenders or flares will be needed. These are 9.4xxx" wide with the center mounted in between the wheel halves. The rear set was made from 4 barrels. 2 turned inside out and hand polished, then tapped for a valve stem.
16x9 et10. Very flush fitment without spacers. They BARELY touch Z32 calipers.
The condition of the wheels is very nice considering their age. The bolts could be tumbled and re-polished, but are very showable. All the bolts/nuts are there. The wheels only have 20 bolts and need NO special tool to take apart. They are super easy to re-finish!
The wheels are in overall great condition with no major curb marks. There are small nicks here and there, nothing serious. I would do a re-polish to bring the most out of these wheels.
The wheels still have the factory painted center inserts with a shiny clear. They look great!
I'll let pics do the talking...
Asking $1,000
OR
$1,200 with 2 spare 16" barrels, two 1/2" 16" lips, and a set of 4 1" 17" lips!
CASH TALKS.
I WILL ONLY SHIP TO PAYPAL CONFIRMED ADDRESS.
MORE PICS HERE! (http://s981.photobucket.com/albums/ae298/loganturn724/)
http://i981.photobucket.com/albums/ae298/loganturn724/128_0216.jpg
http://i981.photobucket.com/albums/ae298/loganturn724/128_0221.jpg
http://i981.photobucket.com/albums/ae298/loganturn724/128_0229.jpg
http://i981.photobucket.com/albums/ae298/loganturn724/128_0223.jpg
http://i981.photobucket.com/albums/ae298/loganturn724/1608sbl.jpg
Fitment on stock body:
http://i55.tinypic.com/1630p2.jpg
I measured the backspacing with a ruler and a straight edge, so the offset will be +/- 5mm. I feel like I am very close though.
Specs:
5x114.3
Hub- I can measure, but it clears my 240sx hubs just fine!
17x9.5 et-40. Yes, -40. Test fitting on my S13, over fenders or flares will be needed. These are 9.4xxx" wide with the center mounted in between the wheel halves. The rear set was made from 4 barrels. 2 turned inside out and hand polished, then tapped for a valve stem.
16x9 et10. Very flush fitment without spacers. They BARELY touch Z32 calipers.
The condition of the wheels is very nice considering their age. The bolts could be tumbled and re-polished, but are very showable. All the bolts/nuts are there. The wheels only have 20 bolts and need NO special tool to take apart. They are super easy to re-finish!
The wheels are in overall great condition with no major curb marks. There are small nicks here and there, nothing serious. I would do a re-polish to bring the most out of these wheels.
The wheels still have the factory painted center inserts with a shiny clear. They look great!
I'll let pics do the talking...
Asking $1,000
OR
$1,200 with 2 spare 16" barrels, two 1/2" 16" lips, and a set of 4 1" 17" lips!
CASH TALKS.
I WILL ONLY SHIP TO PAYPAL CONFIRMED ADDRESS.
MORE PICS HERE! (http://s981.photobucket.com/albums/ae298/loganturn724/)
http://i981.photobucket.com/albums/ae298/loganturn724/128_0216.jpg
http://i981.photobucket.com/albums/ae298/loganturn724/128_0221.jpg
http://i981.photobucket.com/albums/ae298/loganturn724/128_0229.jpg
http://i981.photobucket.com/albums/ae298/loganturn724/128_0223.jpg
http://i981.photobucket.com/albums/ae298/loganturn724/1608sbl.jpg
Fitment on stock body:
http://i55.tinypic.com/1630p2.jpg