PDA

View Full Version : Can a D16 make power with a log manifold? My Quest for 400whp inside........


Jdm94Coupe
03-08-2011, 09:23 PM
new thread.............. http://www.importatlanta.com/forums/showthread.php?311950-D16-Mild-Build.-92-Civic-Cx&p=39239280&posted=1#post39239280 ......
Jdm94Coupe
03-08-2011, 09:54 PM
.........
Jdm94Coupe
03-08-2011, 10:03 PM
..........
Jdm94Coupe
03-08-2011, 10:09 PM
............
Jdm94Coupe
03-08-2011, 10:13 PM
focusing on build. not exterior right now........
Jdm94Coupe
03-08-2011, 10:27 PM
more pics to come 2morrow.... lmk ur opinions.......
.:Stirfry:.
03-08-2011, 10:38 PM
i yea it will with a better clutch..jkjk. ;)
RBS
03-09-2011, 09:53 AM
seems like a good build, although that front bumper is remarkably hideous.
JDMJ
03-09-2011, 04:42 PM
^ x2 please get a bumper then paint
Jdm94Coupe
03-09-2011, 06:24 PM
seems like a good build, although that front bumper is remarkably hideous.

^ x2 please get a bumper then paint

LMAO. Definitely not concerned about outside appearance right now. when i work on it i lean all over the car and get dirt and oil all over the place. body work and paint come dead last for me.......

but on another note.......... think a stock d16z6 head can make around 400whp?
Jdm94Coupe
03-09-2011, 06:27 PM
i yea it will with a better clutch..jkjk. ;)

LOL. that is coming this week homie!! I will prob have jimmy get me one to my house within the next few days, i got a lot of other stuff going on this 2nd. plus its not my daily, lol
Jdm94Coupe
03-11-2011, 06:25 AM
...........
Jdm94Coupe
03-11-2011, 06:28 AM
.........
RBS
03-11-2011, 09:13 AM
if your cramming air into the motor, im pretty sure you can squeeze 400whp out of a stock cylinder head ... with ALOT of air.
Jdm94Coupe
03-11-2011, 10:57 AM
if your cramming air into the motor, im pretty sure you can squeeze 400whp out of a stock cylinder head ... with ALOT of air.

i was jk about that. the head wont be stock. check out above pics..........
RBS
03-11-2011, 11:42 AM
oh, WTH you tricked me LOL





on a real note, a good built motor is great and all .. but IMO that doesnt justify having a raggedy exterior. @ 10 bucks a bumper i would have went for that first LOL
Jdm94Coupe
03-11-2011, 12:40 PM
oh, WTH you tricked me LOL

on a real note, a good built motor is great and all .. but IMO that doesnt justify having a raggedy exterior. @ 10 bucks a bumper i would have went for that first LOL

exterior is bone stock. i havent changed anything. carbon fiber duckbill, that is all....... car has left the garage twice in about a year, no need to rush it to the paint shop yet homie
Jdm94Coupe
03-11-2011, 12:48 PM
.......
Black4DrEK
03-11-2011, 01:10 PM
Good shit!
Jdm94Coupe
03-11-2011, 01:52 PM
Good shit!

reps. thanks 4 showin love. subscribe for more pics/parts, etc....
Black4DrEK
03-11-2011, 04:20 PM
Hellz yea. I would do plenty of Build threads. But on IA I cant...... because im a "shop" or something....haha... wtf.

But good luck with everything.
FasTech
03-13-2011, 10:23 AM
I remembering keeping up with your previous build thread. Could have sworn you were putting the motor in a red seden, though. Anyways, GL with it. Hopefully sometime soon I'll be getting some tips and all from you. Heading up to Atlanta within the week to pick up a z6 block then I'll start dumpin' money and ordering parts.
Jdm94Coupe
03-13-2011, 10:56 AM
I remembering keeping up with your previous build thread. Could have sworn you were putting the motor in a red seden, though. Anyways, GL with it. Hopefully sometime soon I'll be getting some tips and all from you. Heading up to Atlanta within the week to pick up a z6 block then I'll start dumpin' money and ordering parts.

nah the sedan is my daily. u probably saw it in the background in one of my pics...... you can start by buying my rebuilt cylinder head.... ill give you a steal on it......
RBS
03-13-2011, 10:11 PM
save the socks!
Jdm94Coupe
03-15-2011, 09:08 AM
.....
Jdm94Coupe
03-15-2011, 09:10 AM
...........
Jdm94Coupe
03-15-2011, 09:23 AM
here's how it sits for right now..... stock cam.... im going to do a in car video within the next week

http://s4.photobucket.com/albums/y102/Jdm94Coupe/Hatch/?action=view&current=MOV01345.mp4
1moreaccord
03-15-2011, 01:33 PM
Sick! Bout time to see a good build goin..

what brakes you puttin on?
pinedo88
03-15-2011, 02:23 PM
here's how it sits for right now..... stock cam.... im going to do a in car video within the next week

http://s4.photobucket.com/albums/y102/Jdm94Coupe/Hatch/?action=view&current=MOV01345.mp4

sounds just like mine. nice cam hope it makes good power.
Jdm94Coupe
03-15-2011, 03:45 PM
Sick! Bout time to see a good build goin..

what brakes you puttin on?
thanks man i appreciate it...... im still deciding.... 2 be honest, i like the weight im saving by not having rear disks. i would like to do a big brake kit up front and see how that goes. but i see some nice 11" setups on IA just pop up so i might do one of those and get my buddies rear disks if he parts out.......

why you ask, you got somethin for sale? lmk if so


sounds just like mine. nice cam hope it makes good power.

thanks man! i like the way my vibrant sounds, still debating on going 3" though. u parting your car or keeping it? btw i got my tune touched up a bit and jimmy (jjspec) says im makin 250WTQ on 15psi with the stock head. so it looks like its gonna be fun w/ the new head, cam, sprngs/retainers and new clutch installed....
Jdm94Coupe
03-15-2011, 03:46 PM
btw i've got tons of pics of the actual build. i just didnt post pics because i had an old thread and im sure ppl dont want 2 see them all again........

if you want my full build pics lmk and i'll post em up.
SHHHH
03-15-2011, 03:56 PM
Nice thread! Looking good so far :goodjob:
Jdm94Coupe
03-15-2011, 04:08 PM
Nice thread! Looking good so far :goodjob:

thanks man, reps
EJ6
03-16-2011, 12:48 AM
nice build!!!! good to see more dseries boost out there..
j0nbunklah0m
03-16-2011, 02:55 AM
nice, i wouldnt mind seeing the build pics. what did you do with the old gold beaks bar/ control arm setup?
Supraboy87T
03-16-2011, 11:47 AM
Looks good man. I got more motivation to finish my all motor D now. I'd also like to see pics of the build.
Jdm94Coupe
03-16-2011, 07:54 PM
nice build!!!! good to see more dseries boost out there..

thanks man, reps to you!


nice, i wouldnt mind seeing the build pics. what did you do with the old gold beaks bar/ control arm setup?
hey, how did u know i used to have those? lol.... i sold them on here a little while back...... ok i will post all the build pics from when i had bearing failure last year......reps 4 u 2 if i can


Looks good man. I got more motivation to finish my all motor D now. I'd also like to see pics of the build.

ok thanks man, pics coming up...... gl w/ ur build too.......
Jdm94Coupe
03-16-2011, 07:56 PM
......
Jdm94Coupe
03-16-2011, 07:57 PM
.....
Jdm94Coupe
03-16-2011, 07:58 PM
.....
Jdm94Coupe
03-16-2011, 07:59 PM
.....
Jdm94Coupe
03-16-2011, 08:03 PM
..........
Jdm94Coupe
03-16-2011, 08:04 PM
.......
Jdm94Coupe
03-16-2011, 08:04 PM
D16Y7 Bottom End
76MM Vitara Pistons
FJ Custom Length Rods
D16Y8 Micropolished Crank
D16Z6 Cylinder Head completely Rebuilt
ARP Head Studs
OEM Oil pump purchased from FJ's website
Blox Magnetic Drain Plugs
Go Autoworks Low Temp thermostat
Go Autoworks Block plug adapter

http://i4.photobucket.com/albums/y102/Jdm94Coupe/Hatch/DSC00961.jpg
http://i4.photobucket.com/albums/y102/Jdm94Coupe/Hatch/DSC00962.jpg
http://i4.photobucket.com/albums/y102/Jdm94Coupe/Hatch/DSC00963.jpg
http://i4.photobucket.com/albums/y102/Jdm94Coupe/Hatch/DSC00964.jpg
http://i4.photobucket.com/albums/y102/Jdm94Coupe/Hatch/DSC00965.jpg
http://i4.photobucket.com/albums/y102/Jdm94Coupe/Hatch/DSC00966.jpg
http://i4.photobucket.com/albums/y102/Jdm94Coupe/Hatch/DSC00967.jpg
Jdm94Coupe
03-16-2011, 08:12 PM
.....
Jdm94Coupe
03-16-2011, 08:13 PM
...........
Jdm94Coupe
03-16-2011, 08:15 PM
...........
Jdm94Coupe
03-16-2011, 08:16 PM
...........
Jdm94Coupe
03-16-2011, 08:17 PM
............
Jdm94Coupe
03-16-2011, 08:17 PM
...........
Jdm94Coupe
03-16-2011, 08:19 PM
.............
Jdm94Coupe
03-16-2011, 08:19 PM
.........
Jdm94Coupe
03-16-2011, 08:52 PM
......
Jdm94Coupe
03-16-2011, 08:53 PM
........
Jdm94Coupe
03-16-2011, 08:54 PM
.........
Jdm94Coupe
03-16-2011, 09:06 PM
...........
Jdm94Coupe
03-16-2011, 09:07 PM
...........
Jdm94Coupe
03-16-2011, 09:41 PM
...........
Jdm94Coupe
03-16-2011, 09:53 PM
i will be rebuilding the bottom end sometime this month or early april. i will be running a z6 crank this time so i make sure my bearings are good and porting my oil pump for those 8000+ rpm's
Jdm94Coupe
03-18-2011, 09:22 PM
pics r up
Jdm94Coupe
04-01-2011, 05:39 PM
updates coming real soon!
jb55
04-10-2011, 10:43 AM
cant wait to put this bad boy on mine!!
Jdm94Coupe
04-10-2011, 11:12 AM
cant wait to put this bad boy on mine!!

yessir! my boi is gonna have boost soon! lol........ they decide to ever pay u guys? whats the staus on all that?
.:Stirfry:.
04-10-2011, 12:38 PM
400 is possible jimmy made 450 on his single and had a log on it.
Jdm94Coupe
04-10-2011, 02:23 PM
i wanna make 400whp before 20psi.
Jdm94Coupe
04-10-2011, 10:40 PM
............
Jdm94Coupe
04-10-2011, 10:45 PM
...........
Jdm94Coupe
04-10-2011, 10:48 PM
................
Jdm94Coupe
04-11-2011, 09:45 PM
.........