bernard
02-21-2011, 05:35 PM
I have a set of gold RPF1's 17x8/17x9 +45 offset. They are in awesome condition. No curb rash or paint blemishes! $800. I have a fender roller that I can rent out or I can help the buyer roll there fenders.
I have a set of AP2V1's. There painted black. They have have Sumitumo III's 225/255 combo. Good everyday tires. The rears have about 2500 miles on them and fronts are about 40% tread. I would like 750 obo for these.
I am located in Valdosta, Ga. I am willing to ship, or meet up. PM me with questions.
http://i81.photobucket.com/albums/j232/bernard76/777999.jpg
http://i81.photobucket.com/albums/j232/bernard76/777999.jpg
http://i81.photobucket.com/albums/j232/bernard76/742353.jpg
http://i81.photobucket.com/albums/j232/bernard76/778100.jpg
I also have a SOS supercharger kit. It can be ran the way it is now which would be a base kit. I was planning on getting a EMS, putting on the 3.8" pulley( 10-11 psi), Injector Dynamics 1000cc injectors, and have Mase of Mase Engineering out of Jacksonville, FL tune it. My build has been sidetracked with other priorities brokenheart.gif. I recently got married and it is not what I need at this time. I am planning on buying a second car/truck so this kit needs to go. The kit is on the car and is coming off today or this week when I have time . My wife can mail the package out for me. This kit is awesome for daily driving, it makes getting around so much more enjoyable. I rarely take it over 4800 RPM'S. I rarely get into VTEC (set at stock). I used it in one AUTO-X a month ago I kept it in second gear and that was all that I needed. I was not used to all of the new found power and spun it out or got it sideways every single run because I was pushing it (I was on Dunlop Star Specs) It was a blast lol.gif. I have put about 700 miles on the kit. I am the second owner, the first one put about 5K and wrecked his car into a tree which totaled his car. I also switched out my clutch to a Competition Clutch stage 2 with a 8lb fidanza flywheel. The flywheel is not that bad with the new found power thumbsup.gif. My car is a AP1 S2000.
-I will include directions from SOS to install this kit. It is not too bad of a install. I can let the new owner borrow the crank pulley tool to swap his out!
--To run it as the base option; it includes a rising rate fuel pressure regulator
-It is plug and play. You will need to verify the AFR's. You can use a wideband to verify it. All you would have to do is adjust the fuel pressure regulator.
-The only thing this kit would need is a coolant hose, fuel pump, EMS, and belt for the smaller pulley. I have part numbers to pick them up at a parts store. I have the hose coupler to connect the coolant hoses.
-The 3.8" should hit roughly 10-11 lbs of boost. $110 brand new from SOS
-ID 1000's are BRAND NEW!!!!!!!!! They will come with plug and play clips I paid $540 shipped from Tony at T1R.
-I also have a Ricks Header that I might be willing to part with.
$3000- Kit with both pulleys
$3500- Kit, pulleys, and injectors
$4000- Kit, pulleys, injectors and Ricks header
$160- Additionally for the AUT cooling plate. Will only sell with the Supercharger
I am located in Valdosta, Georgia 31605. Prices do not include shipping or PayPal. PM me for more details. I will provide my phone number to people who are interested and would like to talk to me on the phone.
I have a set of AP2V1's. There painted black. They have have Sumitumo III's 225/255 combo. Good everyday tires. The rears have about 2500 miles on them and fronts are about 40% tread. I would like 750 obo for these.
I am located in Valdosta, Ga. I am willing to ship, or meet up. PM me with questions.
http://i81.photobucket.com/albums/j232/bernard76/777999.jpg
http://i81.photobucket.com/albums/j232/bernard76/777999.jpg
http://i81.photobucket.com/albums/j232/bernard76/742353.jpg
http://i81.photobucket.com/albums/j232/bernard76/778100.jpg
I also have a SOS supercharger kit. It can be ran the way it is now which would be a base kit. I was planning on getting a EMS, putting on the 3.8" pulley( 10-11 psi), Injector Dynamics 1000cc injectors, and have Mase of Mase Engineering out of Jacksonville, FL tune it. My build has been sidetracked with other priorities brokenheart.gif. I recently got married and it is not what I need at this time. I am planning on buying a second car/truck so this kit needs to go. The kit is on the car and is coming off today or this week when I have time . My wife can mail the package out for me. This kit is awesome for daily driving, it makes getting around so much more enjoyable. I rarely take it over 4800 RPM'S. I rarely get into VTEC (set at stock). I used it in one AUTO-X a month ago I kept it in second gear and that was all that I needed. I was not used to all of the new found power and spun it out or got it sideways every single run because I was pushing it (I was on Dunlop Star Specs) It was a blast lol.gif. I have put about 700 miles on the kit. I am the second owner, the first one put about 5K and wrecked his car into a tree which totaled his car. I also switched out my clutch to a Competition Clutch stage 2 with a 8lb fidanza flywheel. The flywheel is not that bad with the new found power thumbsup.gif. My car is a AP1 S2000.
-I will include directions from SOS to install this kit. It is not too bad of a install. I can let the new owner borrow the crank pulley tool to swap his out!
--To run it as the base option; it includes a rising rate fuel pressure regulator
-It is plug and play. You will need to verify the AFR's. You can use a wideband to verify it. All you would have to do is adjust the fuel pressure regulator.
-The only thing this kit would need is a coolant hose, fuel pump, EMS, and belt for the smaller pulley. I have part numbers to pick them up at a parts store. I have the hose coupler to connect the coolant hoses.
-The 3.8" should hit roughly 10-11 lbs of boost. $110 brand new from SOS
-ID 1000's are BRAND NEW!!!!!!!!! They will come with plug and play clips I paid $540 shipped from Tony at T1R.
-I also have a Ricks Header that I might be willing to part with.
$3000- Kit with both pulleys
$3500- Kit, pulleys, and injectors
$4000- Kit, pulleys, injectors and Ricks header
$160- Additionally for the AUT cooling plate. Will only sell with the Supercharger
I am located in Valdosta, Georgia 31605. Prices do not include shipping or PayPal. PM me for more details. I will provide my phone number to people who are interested and would like to talk to me on the phone.