View Full Version : 95 civic with a6 swap no start
joshk5145
02-20-2011, 11:17 PM
Just finished up my swap in my civic. Fuel pump is coming on, there is spark. Haven't had a chance to check injectors yet. When I turn the key to the on position the cel comes on but does not go off like it is supposed to. What would cause this? Just a bad ground or??
Thanks
Sir_Christopher
02-20-2011, 11:26 PM
starter?
EmminoDaGreat
02-20-2011, 11:28 PM
check the damn code.
r_Senik
02-20-2011, 11:34 PM
edit: im a dumb ass. but yea check the code
joshk5145
02-20-2011, 11:58 PM
Checked the codes, vtec spool and iat. A6 does not have vtec and there is no iat on my car. it probably doesn't make a difference but i'm running a p28/hondata s200. Couldn't get it to connect to my laptop either.
Sneezin
02-22-2011, 09:56 AM
haha well what does it do when you try to start it,,,,,no start,,, thats not much info.
mitch lab
02-28-2011, 10:19 PM
You using a vtec ecu, so you are gonna throw a cel because the ecu is trying to read vtec and it can not sense it. So I wouldn't worry about that, it should still start up with that ecu.
try this:
1. do a compression test
2. check timing
3. since the ecu is chipped, what map are you using?
Powered by vBulletin® Version 4.2.2 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.