View Full Version : Instrument cluster went out?
Mr. Clean
02-12-2011, 09:23 PM
So I've checked out the back of the cluster and everything is hooked up right, but for some reason just the gauge lights and a/c control lights are out. I removed one of the lights earlier today, but when I put it back in this happened. I've checked fuses and wires, but can't find anything wrong. Any ideas?
Mr. Clean
02-12-2011, 09:41 PM
Omyfail. I just realized where I posted this. Lolol. I apologize. Please will someone move it to tech?
silversol
02-12-2011, 10:21 PM
Check your fuses, Im willing to bet your taillights are not working when you turn the lights on aswell.
94_teg_ls
02-12-2011, 11:49 PM
Check your fuses, Im willing to bet your taillights are not working when you turn the lights on aswell.
x2
Mr. Clean
02-13-2011, 12:45 AM
Tail and tag lights work. I checked that fuse. Any other ideas?
94_teg_ls
02-13-2011, 10:40 AM
ive had this issue but it was the gauge harness i just replaced it
.:Stirfry:.
02-13-2011, 11:37 AM
rheostat or dimmer switch
Mr. Clean
02-13-2011, 04:04 PM
i have LEDs bulbs in my cluster, and i removed one and put it back in yesterday and after that it wouldn't work. is it possible that one bulb could kill the whole circuit?
i swapped the bulb back but it's been too bright outside for me to see if it fixed it or not lol. i'm thinking of replacing the dimmer i guess if this doesn't work.
94_teg_ls
02-13-2011, 07:39 PM
leds are polarity sensitive check them
Powered by vBulletin® Version 4.2.2 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.