2000 Honda EM1 P1607 code

[KrispyWhiteH]

Just seeing if anyone has had this problem occur on their si. My engine light has been a phantom bastard and clearing itself until today i finally caught it on and hurried to a tester to see what the code was. Says its ECM/PCM problem which i have found replacing the ECU wil fix. I was just wondering if my VAFC Neo was F&cking with my wiring.

If anyone has had a reltaed problem i would like to hear and suggestions before i got grab a new ECU.

If someone needs a mod list for my motor i will provide.

[KrispyWhiteH]

maybe?

[mitch lab]

yea replace the ecu. And yes sometime the vafc messed up the ecu. I worked on some cars that did the same thing, just take the vafc off and replace the ecu.

[KrispyWhiteH]

i ran across something about the leaks in the passenger floor board causing the ecu to throw this code due to the connection problem caused by the water. I will be pulling my ecu today and seeing if it is wet. fixing the leak in the a pillar and putting ecu back in to see if it works.

[donek9]

if you end up needing a ecu i got one

[KrispyWhiteH]

Thanks man how much you want for it if so?

[KrispyWhiteH]

pulled ecu out. and..... water came out of it... currently drying it. haha.

[Humphrizzle]

no need for a VAFC.

[KrispyWhiteH]

http://i1127.photobucket.com/albums/l629/clranne/mildew.jpg

mildew in my ecu.....haha

and im keeping vtec controller undoubtedly.

[KrispyWhiteH]

thorough cleaning. runs like new.

[Humphrizzle]

good job..