CAMBER WTF ??????????????

[jdm eg99]

ok this is the problem my brothers car only on the driver side will not camber for nothing..
i was thinking the uca was bent so i went to hpc bought another one installed it same problem..:no::no:


any help would be great... heres the pictures

http://i274.photobucket.com/albums/jj276/jlfspeed/961d335f.jpg
http://i274.photobucket.com/albums/jj276/jlfspeed/352bb872.jpg
http://i274.photobucket.com/albums/jj276/jlfspeed/7a8b9195.jpghttp://i274.photobucket.com/albums/jj276/jlfspeed/112f0a7f.jpg

[Bacon]

Are you looking for negative camber or something?

[jdm eg99]

no normaly when you do sup mods of any kind the car will camber - camber only the driver side will not so there for we can lower the car anymore because it will scrub the finder...

[Bacon]

Only thing I could suggest is aftermarket UCAs so you can control the camber and get it where you want. Is there anything bent that you've noticed?

[jdm eg99]

no iv checked out everything. even before when he bought the shell it had the same problem... dont understand its crazy !

[Bacon]

So, when you lower the car now the passenger side will go into negative camber but the driver side won't? Is that what I am understanding here?

[jdm eg99]

yes !

[Bacon]

By chance, was there any positive camber on the driver's side before it was lowered? Notice any damage to the body where the UCAs bolt to?

[jdm eg99]

no it stayed the same at stock hight. no damage at all.

[jdm eg99]

maybe the lca could be bent ?

[allout13]

has this difference in camber been measured or are you going just by looks?

it is possible one of the fenders could be pulled out a little bit.

[jdm eg99]

variation was showed via our leveler on each sides. lol

[NoWAyItZTOMmY]

what spindles are they?

[RBS]

pull your fenders out, this happens on alot of cars that ive seen. not much you can do about it besides pull the fender and/or get a camber kit, seeing as your spindles and control arms and not bent and are the proper parts.

[oneSLOWex]

Like others have said it could be the fenders. Take it by a shop and have to alignment checked.

[99' LuDe]

my ek had the same issue, blox UCA's FTW

[southside]

Just lower it and see if it cambers try that before you go buying parts.

[jdm eg99]

what spindles are they?

stock

[jdm eg99]

Like others have said it could be the fenders. Take it by a shop and have to alignment checked.

the car already had an alignment done fenders are true !

[jdm eg99]

Just lower it and see if it cambers try that before you go buying parts.

had the car slammed to its nuts no camber change still + camber...

also changed out lca and uca. wtf ???