ct9a gsr
11-16-2005, 11:59 PM
I recently purchased a used RnR GT35R kit in hopes of installing it soon... however, due to a recent accident, I am forced to sell this kit to recover from my losses. I would prefer to sell the whole kit, including all hard pipes and FMIC, all together... but I will part it out if needed.
Kit was used for about 5,000 miles I believe before I purchased it. I never installed the kit, only got to stare at it.
Please PM me SERIOUS offers on the kit or individual parts. If my PM box is full, feel free to email me @ [email protected] or AIM me @ ct9a gsr and leave a message. Please, no low-ballers... appreciate your time so please appreciate mine.
Thanks for your interest.
PTE GT35R (comes w/ a steel braided oil line and uses stock lines too):
http://www.ct9agsr.cjb.net//gt35r/gt35r-1.jpg
http://www.ct9agsr.cjb.net//gt35r/gt35r-2.jpg
RnR Exhaust Manifold w/ Tial 38mm wastegate & steel external dump tube (manifold is tapped for an EGT sensor):
http://www.ct9agsr.cjb.net//gt35r/manifold-1.jpg
http://www.ct9agsr.cjb.net//gt35r/manifold-2.jpg
RnR O2-Delete 3" Downpipe w/ 3" test pipe & flex pipe (tapped for O2 sensor):
http://www.ct9agsr.cjb.net//gt35r/exhaust-1.jpg
http://www.ct9agsr.cjb.net//gt35r/exhaust-2.jpg
http://www.ct9agsr.cjb.net//gt35r/exhaust-3.jpg
PTE FMIC (polished front end tanks):
http://www.ct9agsr.cjb.net//gt35r/fmic-1.jpg
http://www.ct9agsr.cjb.net//gt35r/fmic-2.jpg
Steel I/C Lower Pipes:
http://www.ct9agsr.cjb.net//gt35r/fmicpipes.jpg
RnR Steel Upper I/C Pipe w/ GReddy Flange welded (tapped for methanol/alky/nitrous injection and IAT sensor):
http://www.ct9agsr.cjb.net//gt35r/coldpipe-1.jpg
http://www.ct9agsr.cjb.net//gt35r/coldpipe-2.jpg
RnR Steel Upper Radiator Coolant Pipe:
http://www.ct9agsr.cjb.net//gt35r/coolantpipe.jpg
Kit was used for about 5,000 miles I believe before I purchased it. I never installed the kit, only got to stare at it.
Please PM me SERIOUS offers on the kit or individual parts. If my PM box is full, feel free to email me @ [email protected] or AIM me @ ct9a gsr and leave a message. Please, no low-ballers... appreciate your time so please appreciate mine.
Thanks for your interest.
PTE GT35R (comes w/ a steel braided oil line and uses stock lines too):
http://www.ct9agsr.cjb.net//gt35r/gt35r-1.jpg
http://www.ct9agsr.cjb.net//gt35r/gt35r-2.jpg
RnR Exhaust Manifold w/ Tial 38mm wastegate & steel external dump tube (manifold is tapped for an EGT sensor):
http://www.ct9agsr.cjb.net//gt35r/manifold-1.jpg
http://www.ct9agsr.cjb.net//gt35r/manifold-2.jpg
RnR O2-Delete 3" Downpipe w/ 3" test pipe & flex pipe (tapped for O2 sensor):
http://www.ct9agsr.cjb.net//gt35r/exhaust-1.jpg
http://www.ct9agsr.cjb.net//gt35r/exhaust-2.jpg
http://www.ct9agsr.cjb.net//gt35r/exhaust-3.jpg
PTE FMIC (polished front end tanks):
http://www.ct9agsr.cjb.net//gt35r/fmic-1.jpg
http://www.ct9agsr.cjb.net//gt35r/fmic-2.jpg
Steel I/C Lower Pipes:
http://www.ct9agsr.cjb.net//gt35r/fmicpipes.jpg
RnR Steel Upper I/C Pipe w/ GReddy Flange welded (tapped for methanol/alky/nitrous injection and IAT sensor):
http://www.ct9agsr.cjb.net//gt35r/coldpipe-1.jpg
http://www.ct9agsr.cjb.net//gt35r/coldpipe-2.jpg
RnR Steel Upper Radiator Coolant Pipe:
http://www.ct9agsr.cjb.net//gt35r/coolantpipe.jpg