***ZC/Z6 Mini Me***

[Rsporty]

My wife has a Del sol Si, with the z6.
I think the rings are bad and I'm looking at buying a ZC single cam bottom end and building a Mini Me.
The ZC bottom end Is just the block, crank and oil pan.

Can I use EVERYTHING ELSE from the Z6 to complete this motor and get it in the Del sol, or do I need to source any other ZC parts?

Thanks, for any help, ideas or suggestions.

[Theycall_Metue]

found a little info:
Cylinder Head/ Cylinder Block/ Compression
Z6/ Z6/ 9.13:1
Z6/ Y8/ 9.29:1
Z6/ A6/ 9.95:1
Z6/ ZC/ 12.03:1 <----- compression seems unreal but im just using what i found
Z6/ D15(ALL)/ 10.10:1
Z6/ Y7/ 9.62:1
Y8/ Z6/ 9.45:1
Y8/ A6/ 10.33:1
Y8/ ZC/ 12.61:1
Y8/ D15(ALL)/ 10.52
(http://www.honda-tech.com/showthread.php?t=1204963)

"This is what I was getting at...the sohc zc and a6 are identical except for the cam. The compression on both is 9.1:1"
(http://www.honda-tech.com/showthread.php?t=1204963)

[0\s accord]

i got a zc with a z6 head runs amazing if u got any questions u can holla at me

[Rsporty]

Thanks, guys!

[CaTcH22]

12:1 c.r. is pretty high. Be sure you run 93, and I would get it tuned t be save.

[xero_xero]

those are massive numbers. 12 to 1 cr. good luck.