b16a2 questions?

[bullet67]

So, I've purchased a b16a2 it came with the original harness and a p2t ecu. My questions are what exact wiring harness and ecu I need to put this into a originally non vtec honda del sol. I have the S version of the del sol so that I have all the bases covered. Also if anyone is in the market I have a CRV harness and of course a 2000 civic si harness and ecu to get rid of.

thanks,
:goodjob:

[Starrfire]

What year del sol?

[bullet67]

94

[Starrfire]

use the original harness and add in pins to the ecu and into the existing harness or just route them with the harness.
www.phearable.net

[bullet67]

The only issue I have with that is the original harness has the ecu plugs attached to it how do I go about using the original harness

[RBS]

The only issue I have with that is the original harness has the ecu plugs attached to it how do I go about using the original harness

you cant.

[bullet67]

Well see that's what I thought so what harness and ecu do I need to make this work?

[RBS]

use your original engine harness and chip your p28, its the cheapest and probably the best way to do it

[bullet67]

So you're saying I can use my non vtec del sol d series harness?

[Starrfire]

^^^Yes, you only need to run a few wires. You live in Cartersville right, which is an hour away from me. i could technically help you since I have all the pinouts and factory pins. Its an easy procedure since you have extra harnesses.

[bullet67]

ok, good deal. it will just be a a little while before i can afford the other parts i need to actually get it set up but its good to know i can use my harness fairly easily. I'll let you know when i've got it all together and ready. thanks for the help.