PDA

View Full Version : Skunk2 IM, ACT flywheel, AEM fpr, solid torque mounts FS


josh green
11-14-2010, 04:36 PM
Contact: Cell (706) 266-7294, call or text.
Items are located in Rome, Ga.
Prices are negotiable.

ACT Streetlite flywheel 12.5lbs for B series honda engines, could use resurfacing, $125.
http://img.photobucket.com/albums/v342/boostedhatch/for%20sale/DSC_0539.jpg
http://img.photobucket.com/albums/v342/boostedhatch/for%20sale/DSC_0538.jpg
josh green
11-16-2010, 03:45 PM
bump
Black4DrEK
11-16-2010, 07:04 PM
Trade that flywheel For some Mint EM1 seats?

Just throwing it out there.. LMK Thanks
josh green
11-16-2010, 09:13 PM
Nah sorry, just want the cash really.

FPR sold!
josh green
11-19-2010, 01:59 PM
bump
j0nbunklah0m
11-19-2010, 03:21 PM
where do the mounts connect to the motor? and for what car?
schia89
11-19-2010, 03:26 PM
where do the mounts connect to the motor? and for what car?

Those are the torque mounts that bolt under the frame rail. One is connected to the tranny in the front and the other is hooked the the AC compressor bracket
josh green
11-19-2010, 11:00 PM
^^ what he said.
josh green
11-22-2010, 02:52 PM
bump
josh green
11-23-2010, 08:33 PM
Bump, intake manifold gone.
mud_monkey
11-24-2010, 06:22 AM
ac and trans brackets come with the torque mounts?
DustnU
11-24-2010, 09:44 AM
Will the mounts fit a SOHC? I have an Ej and I need these if so.
josh green
11-24-2010, 04:46 PM
Will the mounts fit a SOHC? I have an Ej and I need these if so.

The mount to the chassis underneath the frame rail just like stock, sohc or dohc.

mud_monkey, its just for the mounts, sorry I didnt specify in the thread. I am sure I would work out a price with the tranny and AC bracket.
DustnU
11-24-2010, 05:19 PM
sweet, man if you still have them after this weekend I'll prolly cop them.
carbon_crash
11-25-2010, 05:19 PM
whats ur price for both torque mounts and the ac bracket? I dont need the trans bracket
josh green
11-26-2010, 05:51 PM
Sorry guys, torque mounts sold.
Da_unknown
11-28-2010, 09:40 PM
bump
josh green
12-01-2010, 10:50 AM
bump, thanks man!
josh green
12-03-2010, 10:25 PM
bump
josh green
12-07-2010, 12:20 PM
Bump
josh green
12-09-2010, 07:51 PM
bump
josh green
12-13-2010, 05:35 PM
bump
aachoo
12-14-2010, 04:42 PM
was there an intake manifold for sale??
JDM_FERIO
12-14-2010, 10:08 PM
how much for skunk2 intake manifold?? n for wat series?
Da_unknown
12-14-2010, 10:40 PM
was there an intake manifold for sale??he sold it
josh green
12-17-2010, 03:49 PM
bump, flywheel only thing left. Make some offers.
josh green
12-20-2010, 01:24 PM
bump
josh green
12-23-2010, 08:39 AM
bump
josh green
12-25-2010, 06:35 PM
bump, price is obo.
josh green
12-29-2010, 03:34 PM
ttt
eViLMunkey
12-29-2010, 06:14 PM
is the flywheel machineable? since it looks like there are some hotspots on it and you wouldn't happen to know the min. Machining specs for the flywheel, in case I can machine it myself. .
josh green
12-30-2010, 08:35 AM
Yes, the flywheel is machinable. There are several hot spots but there is very little distortion to the surface. I usually have my machine shop "resurface" them for a fresh clutch install and they take the absolute minimum. This flywheel was in my car when I bought it and the original owner said that he bought it new, I might possibly have a receipt for it that came with the car. The hotspots came from launching on slicks, the clutch that was in the car felt like it was at its limit in holding power. Any other questions I will be glad to answer.
josh green
01-03-2011, 03:33 PM
bump
josh green
01-12-2011, 01:24 PM
bump
josh green
01-18-2011, 10:17 AM
bump
josh green
01-21-2011, 10:27 PM
bump