View Full Version : Power Mods HELP PLS !!! 1999 GSR SWAP IN 1998 LS
88crxboosted
10-20-2010, 08:58 PM
So if im using a GSR engine harness on a LS body. How and where do I to relocate those last 3 pins for
1.CKF Sensor +
2.CKF Sensor -
3.EVAP Purge Control Solenoid
Can somebody guide me through this please ! Thank you !!!!!
Starrfire
10-20-2010, 10:46 PM
They should be the same if you are using the harness that came out of the car. Just Iab's, knock sensor,vtec solenoid and vtec pressure switch.
EmminoDaGreat
10-20-2010, 11:04 PM
all 96 and up integras have ckf so you shouldnt have to move anything.
88crxboosted
10-21-2010, 03:31 PM
They should be the same if you are using the harness that came out of the car. Just Iab's, knock sensor,vtec solenoid and vtec pressure switch.
No im using the 99 gsr harness not ls harness
88crxboosted
10-21-2010, 03:32 PM
They should be the same if you are using the harness that came out of the car. Just Iab's, knock sensor,vtec solenoid and vtec pressure switch.
No im using the 99 gsr harness not ls harness
Starrfire
10-21-2010, 11:38 PM
^^^Same wiring to the harness and the strut tower to the ecu. Plug and play minus the compatability that the strut tower to ecu lacks the mentioned sensors in the Ls body. Wire from the strut tower plug to the ecu. Look up the pinouts at www.phearable.net
Powered by vBulletin® Version 4.2.2 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.