Some pics after the swap. *JJSPEC approved* [Archive] - IMPORTATLANTA.COM - Automotive, Lifestyle, Offtopic, Forum, Blog, & Online Community

CaTcH22

10-10-2010, 10:36 AM

This is a before of my single cam. It was fun and powerful, but after 6 years it was time for an upgrade.

http://i728.photobucket.com/albums/ww287/QWKD15/DSC02849-1-1.jpg

During.

http://i728.photobucket.com/albums/ww287/QWKD15/Enginebaysig2.jpg

http://i728.photobucket.com/albums/ww287/QWKD15/webblack1.jpg

And these are some after.

http://i728.photobucket.com/albums/ww287/QWKD15/DSCN3983.jpg

http://i728.photobucket.com/albums/ww287/QWKD15/DSCN3978.jpg

http://i728.photobucket.com/albums/ww287/QWKD15/DSCN3977.jpg

http://i728.photobucket.com/albums/ww287/QWKD15/DSCN3979.jpg

http://i728.photobucket.com/albums/ww287/QWKD15/webengine1.jpg

http://i728.photobucket.com/albums/ww287/QWKD15/DSCN3980.jpg

http://i728.photobucket.com/albums/ww287/QWKD15/DSCN3982.jpg

-S Double C-

10-10-2010, 10:39 AM

damn i hear yah, you really steped up

bdydrpdmazda

10-10-2010, 10:40 AM

lookin good...

CaTcH22

10-10-2010, 10:48 AM

damn i hear yah, you really steped up

Yeah, i figured since Jimmy knew more about H-series than most people, and have extra parts everywhere, that this would be the smart move of any move. But now I need some help with new username ideas. Lol.

CRXdelsol

10-10-2010, 11:01 AM

Dam bro thats a big upgrade... nice

Dylan

10-10-2010, 11:11 AM

hell yeah! im gonna have to come check that beast out. QWK H22

G.C

10-10-2010, 11:22 AM

oh ham!!! you are going to be pullllinnnnn!! and spinnninnnnn. Nice upgrade.

CaTcH22

10-10-2010, 11:24 AM

hell yeah! im gonna have to come check that beast out. QWK H22

I was thinkin QwK 'D'ra'H'... See what I did there?? Lol. QwK DraH.

msanch24

10-10-2010, 11:35 AM

thats a really impressive manifold. well done

*EFilliated*

10-10-2010, 11:52 AM

Dat Shit looks badass

CaTcH22

10-10-2010, 11:54 AM

thats a really impressive manifold. well done

Thanks. We're gonna start making a few different styles and see how they do. This one is an equal length style, all of the runners are perfectly equal.

mistergou

10-10-2010, 12:11 PM

looks nice!

revenge

10-10-2010, 12:34 PM

very nice,and well done!!!!

j0nbunklah0m

10-10-2010, 12:59 PM

octopus mani lol good luck with traction :p

CaTcH22

10-10-2010, 01:12 PM

octopus mani lol good luck with traction :p

Its the "dirty sex, orgy" manifold. Lol. Looks like legs foldin around.

Genji-Sama

10-10-2010, 01:15 PM

That manifold is super sexy, likin the H as well

Tree

10-10-2010, 01:18 PM

looks good, what done to the h?

CaTcH22

10-10-2010, 01:26 PM

looks good, what done to the h?
The bottom-end was a stock rebuild for now, but the head is fully built, stage2 cams, springs, retainers, p+p, etc. Revving to about 8500 on 6psi with a little creepin to about 10psi. After the first of the year we are gonna build it with a Mahle/Eagle setup.

Black4DrEK

10-10-2010, 01:29 PM

O GAWD!!!!

very nice!

Da_unknown

10-10-2010, 02:02 PM

nice..

HateCity24

10-10-2010, 08:25 PM

that exhaust mani setup is the tits.

Echonova

10-10-2010, 08:29 PM

HOLY HELL!!!!!

CaTcH22

10-10-2010, 08:58 PM

HOLY HELL!!!!!

Thanks!! Its fun as HELL too! lol.

JITB

10-10-2010, 09:12 PM

dam... ibet it moves pretty well! lol

Hatmanafro

10-10-2010, 10:56 PM

the turbo mani made me cum.. true story.

msanch24

10-10-2010, 11:05 PM

Thanks. We're gonna start making a few different styles and see how they do. This one is an equal length style, all of the runners are perfectly equal.

youll have to let me know what it does for numbers.

claybird

10-11-2010, 01:50 AM

it is a nice mani

EJdm

10-11-2010, 08:59 AM

:crazy:.........LOVE THE MANI looks like a beast tooo...any numbers???

Faust

10-11-2010, 11:25 AM

And that is a GORGEOUS peice of Artwork, hell of a job dude

jdm eg6

10-11-2010, 01:22 PM

nice swap.. so how much hp

JDMDA_1.7

10-11-2010, 02:03 PM

very nice!!!

Jdm94Coupe

10-11-2010, 06:00 PM

look expensive to me. d16 ftw..... nice job switching it up! :)

JJSPEC Racing

10-11-2010, 08:47 PM

Glad to finally read the thread. Has been under wraps for a while. Justin really put something nice together. Great choice of engine, turbo, and other parts that work so well together. This setup is pretty awesome! He put the turbo where he wanted it and we built the manifold to fit it. the runners are equal length like he said earlier. We can build something for you guys too. I had a customer that saw it during the welding phase and said it looked better than his PeakBoost manifold he has. That was a compliment that I will remember for a while. It has been a while since I have driven something like this and I am impressed thoroughly! Cant wait to see it at the track!

Jdm94Coupe

10-11-2010, 09:10 PM

how much your manifolds run jj....... one like this for a sohc..... pm me. i may be switching up my turbo setup, etc in january when i move.....

DarKStaR

10-11-2010, 10:14 PM

nice swap.. so how much hp

no numbers yet.....street tuned..

CaTcH22

10-11-2010, 10:31 PM

no numbers yet.....street tuned..
ACTUALLY!!!!!

I do got some numbers. We were checkin out a couple minor issues, and decided to pull it on the dyno one time.

This is on a, LITERALLY, 15 minute street tune. Really rich, EXTREMEY low timing just to be safe, and I turned down my rev limiter to 8200. This is creeping to about 13 psi.

http://i728.photobucket.com/albums/ww287/QWKD15/webnumbers.jpg

And here is a older comparison of the sohc on 14psi versus the new 15 minutes of street tuning.

http://i728.photobucket.com/albums/ww287/QWKD15/webdyno.jpg

350whp and 235wtq isnt bad for 13psi and 15 minutes. I didnt even have the laptop at work. Lol

JJSPEC Racing

10-11-2010, 10:39 PM

There is a lot left in there. Going to be awesome!

JJSPEC Racing

10-11-2010, 10:43 PM

how much your manifolds run jj....... one like this for a sohc..... pm me. i may be switching up my turbo setup, etc in january when i move.....

Pm sent!

-S Double C-

10-11-2010, 11:38 PM

Pm sent!

Well if you havent heard yet i moved to the dark side and 9's are a breeze now hehe (bikes) I need to find out if we can figure out how to get a flange so
you could make a turbo manifold for my zx10r. I wanna see some 8's by summer of 2011

joshk5145

10-11-2010, 11:58 PM

Holy balls. One hell of a upgrade. Looks sick man

JJSPEC Racing

10-12-2010, 07:27 AM

Well if you havent heard yet i moved to the dark side and 9's are a breeze now hehe (bikes) I need to find out if we can figure out how to get a flange so
you could make a turbo manifold for my zx10r. I wanna see some 8's by summer of 2011

Should be able to get a flange cnc'd. Does it have a gasket?

j0natell0

10-12-2010, 02:45 PM

niiiiiice. wanna sell your single cam turbo setup?

CaTcH22

10-12-2010, 09:00 PM

niiiiiice. wanna sell your single cam turbo setup?

It was sold to help fund this setup. :goodjob:

JDMJ

10-12-2010, 09:10 PM

I would also like a price quote on a mani like this for a sohc..thanks.

CaTcH22

10-12-2010, 10:42 PM

I would also like a price quote on a mani like this for a sohc..thanks.

pm'd

deondre

10-13-2010, 03:39 AM

damn, not only did this nigga go H,he aslo went T.nice!

Jdm94Coupe

10-13-2010, 05:23 AM

damn, not only did this nigga go H,he aslo went T.nice!

thats the only reason to justify going h..... from a "built" turbo d

CaTcH22

10-13-2010, 08:13 PM

thats the only reason to justify going h..... from a "built" turbo d

Oh yeah trust me, I have all the respect in the world for a d-series. And this decision was either turbo or no go. Lol.

boosted_nonv

10-14-2010, 08:13 PM

nice upgrade

wanggsticky

10-14-2010, 09:40 PM

daayum looks beasty. congrats

Jdm94Coupe

10-15-2010, 01:56 PM

Oh yeah trust me, I have all the respect in the world for a d-series. And this decision was either turbo or no go. Lol.

good shit. i like the way you think..... ima ride mine out for a while. bisi the head out, high boost, e85 and im switching to 1000cc+ injectors and we'll see what i make then, lol..... good job on the build tho

CaTcH22

10-21-2010, 10:09 PM

Messed around with the boost solenoid a little and did some tuning. Got the boost to come in alot lower and it hits alot harder now on the big end!

http://i728.photobucket.com/albums/ww287/QWKD15/panaramicweb.jpg

http://i728.photobucket.com/albums/ww287/QWKD15/webdynonum.jpg

Thats at 16psi and 7500rpms. :goodjob:

Thats 465whp and 327tq on a DynoJet.

EG_Ryder

10-24-2010, 11:07 PM

Damn man that thing, esp the mani, looks AMAZING! congrats and good luck!

DA9_Vito

10-25-2010, 08:04 AM

seen ya out there on zebulon rd this past saturday, swap is beast man.

Greddypacked

10-25-2010, 08:29 AM

Swap is awesome and great numbers, now upgrade the looks some on the outside and it will turn heads like omfg lol. Good work!

DarKStaR

10-25-2010, 11:14 AM

The car has looked that way for 6 years, lol why change now? plus, less flashy the better ;)

CaTcH22

10-26-2010, 12:42 PM

Swap is awesome and great numbers, now upgrade the looks some on the outside and it will turn heads like omfg lol. Good work!

Thanks. Yeah if I change anything it will be the rims, taillights, and maybe paint it, but that would be it.

dannysun

10-27-2010, 05:16 PM

Nice car bro, what kind of tranny are you using. I am using a m2b4 with LSD and having traction problems in 3rd

Brian*

10-27-2010, 05:38 PM

DAMN! Good stuff man*

JDMJ

10-27-2010, 06:29 PM

What are you using to control boost? I used to have a profec b spec 2 but sold it and need something good and affodable.

dannysun

10-27-2010, 11:20 PM

get a blox manual boost controller

CaTcH22

10-27-2010, 11:28 PM

get a blox manual boost controller

I have Hondata controlling the boost, so it changes based on what surface I will be running. Asphalt is set to about 6 psi first and 2nd, then fades up goin thru 3rd. Track will be 10-15 psi in first-3rd, then 18-20 on the big end. Its makin 419 on 16 psi stopping at 7500(boost creep is being fixed now) but the track will be at 18-20 revving to 8500.

CaTcH22

10-27-2010, 11:33 PM

Nice car bro, what kind of tranny are you using. I am using a m2b4 with LSD and having traction problems in 3rd

I have the 95 prelude si tranny (long gears!) good for highway pulls. lol