PDA

View Full Version : VQ35de build



HERETIC JOHN
09-23-2010, 10:00 AM
im looking to rebuild my vq35de motor. does anyone have experience rebuilding these motors her and wan to lend a hand for a DIY project??? pm/text me 678-314-0307. thanks

choiiiiiiiii
09-23-2010, 11:20 AM
124 Paper Mill Rd Suite B Lawrenceville GA 30046. 678-371-6185 Marvin or 678-500-4983 Kiddo.


marvin and kiddo. they are vq gurus and are awesome to work with

HERETIC JOHN
09-23-2010, 09:49 PM
thanks

JessAlba452
09-25-2010, 11:11 PM
Hey Heretic John! :) I think Mdeezy is also a member on here and he could help out with the VQ. What type of rebuild are you doing? Also are you going to add any goodies like cams/rods/pistons? A friend of mine is selling his VQ35DE with 140k miles and engine stand for $400. In the case that you would rather get another motor instead of rebuilding.

HERETIC JOHN
09-26-2010, 09:53 AM
im installing the following

HKS FCON
RC 750 injector
aem uego wideband
2.5 inch testpipes
HKS turbo timer
walbro 255 lph fuel pump
Arias 96mm pistons
Pauter rods
arp L19 head studs
greddy tt kit
Cometic head gaskets
greddy oil catch can
ACL rod bearings
ACL main bearings
ACL thrust washer
NGK 1 step colder copper spark plugs

thats my build in a nutshell. 500whp daily driven

JessAlba452
09-26-2010, 04:47 PM
Very nice Heretic John! :D Best of luck I want to see this on the street NOW! ;)

G.C
10-01-2010, 10:36 AM
dam that's going to be a beast! build it right and take your time on it, you don't want all that money blow to pieces. G/L With your build. You might want to check out 350z/g35 forums.

HERETIC JOHN
10-05-2010, 07:40 PM
yeah mos def. when its done its GAME OVER.

HERETIC JOHN
11-19-2010, 11:17 AM
bump

jumpin800agl
11-21-2010, 03:07 AM
if you decide to have a shop do install i recommend Forged Performance in Marietta or Z1 in Carrollton. both are nationally know shops, GLW build. Are you using new 20g turbos or 18g?

AnthonyF
11-23-2010, 07:41 PM
yeah mos def. when its done its GAME OVER.

I'd go to Forge Performance for your build. My boy went there for his 07 Auto 350z HKS TT making 600.

-Ant.

HERETIC JOHN
11-29-2010, 11:28 PM
if you decide to have a shop do install i recommend Forged Performance in Marietta or Z1 in Carrollton. both are nationally know shops, GLW build. Are you using new 20g turbos or 18g?

18g turbos. did forged do the work on your 04 350z tt???

jumpin800agl
11-30-2010, 10:36 AM
18g turbos. did forged do the work on your 04 350z tt???
Yes Forged did all the work on my car. I did not build the motor, but they have a good track record doing so and planned on having mine built, but sold the car due to moving to Italy. I drove my stock block car with 400 whp for 20k miles without issue.

HERETIC JOHN
12-05-2010, 05:07 PM
how was the power at 400whp?????

jumpin800agl
12-06-2010, 07:21 AM
how was the power at 400whp?????

The car was fun to drive. The 18g's spool quickly so power is there in no time with most being in the midrange of the power band. I am not a good drag racer, but ran a 12.8 in 2 trips there while I had it. I have seen similar setups run low 12's or even high 11's on DR's. If you search on here I had a welcome/build thread back around Jan./Feb. 08 on here with pics/dyno etc.