gsr boost stuff! cp 9:1's, crower i beams, RC750's, SC61s, SLS top mount and more!!

[jdmDC20]

what's up guys, got a few things up for grabs, i had to change my head gasket and found out that my sleeves have sunk.... so in the process of getting that fixed i have all my internals lying around and i want to upgrade so i'm puttin this stuff up for sale... all parts have LESS than 2k miles on it!!
CP 9.1's 81.5mm rings are still good of course 400
Crower i-beams, crower rod bolts 600
http://i2.photobucket.com/albums/y43/jdmgsrcoupe/DSCN1227.jpg
jdm gsr crank freshly polished and cleaned from machine shop 250
http://i2.photobucket.com/albums/y43/jdmgsrcoupe/DSCN1306.jpg
i aslo have a USDM gsr crank for 200
Precision SC61 with Scover less than 2000 miles on it, no oil leaks at all 800
http://i2.photobucket.com/albums/y43/jdmgsrcoupe/DSCN1239.jpg
http://i2.photobucket.com/albums/y43/jdmgsrcoupe/DSCN1248.jpg
RC 750cc injectors WITH OUT clips 300
Type R intake manifold BARE 200
http://i2.photobucket.com/albums/y43/jdmgsrcoupe/019.jpg
http://i2.photobucket.com/albums/y43/jdmgsrcoupe/DSCN1238.jpg
Straight Line specialties top mount t3 with 38mm flange/downpipe and dumptube, will not seperate, its all or nothing 1500 the wastegate can go as well for 200 (14lb spring)
http://i2.photobucket.com/albums/y43/jdmgsrcoupe/DSCN1242.jpg
http://i2.photobucket.com/albums/y43/jdmgsrcoupe/DSCN1219.jpg
JDM gsr block with block guard, has hairline cracks in sleeves 150
http://i2.photobucket.com/albums/y43/jdmgsrcoupe/DSCN1320.jpg

[jdm eg6]

if only i had the money

[jdmDC20]

bumpidy

[egB20B]

How much for the aem adjustable fuel pressure reg?

[dasickness]

u saleing the gsr head as well too.if so how much??

[Black4DrEK]

What is an average power rating this stuff makes?

Like that turbo mani? Also turbo..


Also what Wastegate is that?

[jdmDC20]

FPR and head are not for sale... just the manifold and injectors

this set up with an extremely conservative tune gave me 450whp at 17psi and the wastegate is a 38mm tial with 14psi spring

[Black4DrEK]

Ok nice..

do you know the number of the turbo like ...(sc6152E) ect..

[jdmDC20]

it's a sc6182s i believe.... its an 82ar 3'' vband exhaust side with the 70ar compressor side... 4'' inlet with 2.5 outlet and it has the gt40 wheel

i'd go see what the turbo says but its at the shop, i'm pretty sure that's the right part number though

[.:Stirfry:.]

good stuff. gl

[jdmDC20]

thank you sir

[Starrfire]

Does it have all the oil lines, clamps, and knick knacks that would come with the kit. Send me a pic of all of it if possible. I have cash in hand if I like it.

[jdmDC20]

yes sir the kit will come complete with couplers, clamps oil line kits and the only thing that it needs that i do not have are wastegate gaskets, if you needed a tapped oil pan i have one of those as well i will throw in, i'll get some pics for you soon, the car is at the shop right now so when i go over there again i'll grab some for you

[jdmDC20]

lots and lots of interest... nothing solid yet

[jdmDC20]

whole kit is no longer available... the only thing available is just the manifold/downpipe/dump tube as well as the wastegate and turbo

[jdmDC20]

back to page 1

[jdmDC20]

throw me some offers... i am flexible

[jdmDC20]

i know someone wants to go fast!

[ckleinEM1]

mugen valve cover for sale?
badass parts to man bump

[jdmDC20]

nah the mugen was given back due to it being warped...

[teg69]

What's up with the pistons are they scared or any thing

[jdmDC20]

nope... they have less than 2k on 'em... perfectly fine just black from runnin rich, the rings are good too if you dont wanna buy another set, just clock 'em and stick 'em in

[jdmDC20]

who wants to go fastt?!?!

[jdmDC20]

manifold, turbo and waste gate go for 1800 this week... lets make a deal!

[Dicer911]

PM'ED

[jdmDC20]

replied....


update:
turbo, downpipe, dump tube, 750's, fuel rail, FPR are no longer available....

what i still have:
pistons, crank, block, 1200cc RC injectors (brand new) w/resistor box, walbro 255lph HP, oem type r intake manifold, stage 5 sprung competition clutch clutch kit. and i have another sc61 with an S cover that has a 5 bolt exhaust side, needs to be rebuilt i'll let it go for 200 bucks