92 Civic 4dr Rear Lip...

[a94civicex]

So i got a rear lip from my buddy for my 4dr eg8. It doesnt have any hardware. The sides I can run screws through to bolt it to the bumper on each side. But i need to know how to bolt it up in the rear middle part of the bumper.
On my previous ej1 i had a rear lip on it & used self taping screws to bolt it up on each side but in the rear middle part of the bumper i have somewhat "z" shaped brackets.
Does anyone know what im talking about & where i can find them & the correct size that im going to need to bolt it up.

http://i52.tinypic.com/ms2mn7.jpg

[thepolecat]

I have one like that on my car- I used double sided auto adhesive tape acrodd the part that is on the bumperand stuck the middle section one. Be careful because it is a one shot deal. PM me if you need any pics or have questions.
I had the same problem though on mine years ago.

[a94civicex]

I have one like that on my car- I used double sided auto adhesive tape acrodd the part that is on the bumperand stuck the middle section one. Be careful because it is a one shot deal. PM me if you need any pics or have questions.
I had the same problem though on mine years ago.

I don't really want to double side sticky tape it. I would rather just find the bracket but I'm not sure of the size bracket I need, I was hoping someone had them on their car & could get me a measurement that way I can go pick some up!

[a94civicex]

Problem Solved.

[Theycall_Metue]

was about to say just use black screw