Help me-Help make you faster:SSR,H22a,Skunk2,Gsr head, Pro series,b16 trans

[Starrfire]

Ok I have a lot of things for sale. i don't need your crap so if you have trades, make sure they are at least worth something.
First off some skunk2 pro2 camshafts for a B series, Less than 3k on them, engine dropped a valve. They DO NOT come with cam gears SOLD!!!

Ok next off a complete p72 obd1 gsr head, and not the one that was on the b20/vtec that lost a valve. I got this one from B18c1turboed and then got an entire gsr engine about 2 months later. it comes with all you see(minus the cardboard sheet) It has a distributor, and a valve cover, cams all the valvtrain, cam caps and bolts, as well as a complete intake manifold. SOLD!!!


Next is a s4c b16 trans out of an em1 with 154k miles, no grinds or whines $400 firm. I will not negotiate. You don't like the price don't buy it.SOLD!!!

Next is a few things for sale:
Edelbrock 65mm throttle body-SOLD!!!
Rs machine pistons 81.5mm pr3 pistons on Ls rods with arp rod bolts-SOLD!!!
Az race and machine B series girdle for b16/b17/b18a/b/b20b/z with gsr main bolts-SOLD!!!


Next up is a gsr short block with itr pistons, has some cylinder wall rust and a tapped oil pan, needs to be honed. Stock bore. 250 obo SOLD

Next up is an SSR header for an h22. I paid 1k for the header and $100 for the test pipe. Its bent for an h2b setup, but is only bent about 15 degrees so if you want it on your h22 then all you have to do is bend it back. 2.5" ID flange. Not some cheap knockoff. SOLD

Next up is a skunk2 pro series IM for a p72 gsr head SOLD!

Next up is an h22a that has been dissasembled. Is all there minus cams, even has brian crower dual valve springs and retainers. Has internal coil distributor, Ngk plug wires, 5k timing belt and water pump both oem. block code h22a-3032297 SOLD!!!
Next are a few random pieces:
jdm b20b head-p75 meaning same cast as an Ls:$50
Rock auto 84mm piston rings, b20/Ls main and rod bearings SOLD!!!
civic short throw shifter$15
AC brand fuel rail for B series SOLD!!!
http://i252.photobucket.com/albums/hh30/Starrfire86/austinspictures292.jpg

Pm me for best response. My location is around Rome. mods if there is any problem with my thread please pm me before.

[jcs]

if you are willing to part id like to buy the valve cover of the b20 head...i will include a stock ls valve cover also..

if not thanks anyway GLWS

[Starrfire]

No thanks as that I will come out to no gain.

[quickdodge®]

mods if there is any problem with my thread please pm me before.

If you find your thread missing, YOU contact a mod. Later, QD.

[tinkolby_25]

How much for the black and blue h valve cover in the first pic?

[Rsporty]

PM'd

[95turd]

will you take a b series turbo log manny ant t3t4 turbo both brand new an 200 for tranny. pm me

[Starrfire]

will you take a b series turbo log manny ant t3t4 turbo both brand new an 200 for tranny. pm me

Nope I've got no need for it since I'll have my peakboost top mount soon.

[Starrfire]

evening bump

[94ej2]

are you willing to ship the b16 transmission to mobile, al(36693)?

[Starrfire]

^^^I don't have time to get to a place that ships since I work most of the time. But since I'm in Alabama i might meet around the middle of the state if you were willing.

[Starrfire]

bumping it up

[Slow99coupe]

great prices, if the trans is available in a couple weeks i'll try and get it, glws though on these parts

[Starrfire]

^^^Maybe, had a lot of people interested in this stuff but we'll see who mans up.

[JDMJ]

I can vouch for this seller..very good guy and great prices as well..bumpp

[yunglaosta]

meet up for the block in georgia?

[Starrfire]

Bump for the night

[Starrfire]

TTT

[ricktrbo3dr]

im interested in gsr skunk 2 intake manifold and b series aftermarket, pm me a price please, thanks! i may have afew parts ur interested in, just pm me! bump 4 good deal!

[ricktrbo3dr]

aftermarket fuel rail! my bad, one more bump!!!!!!!!!!!!!!!

[marcos713]

If only they were pro1s...GLWS

[Starrfire]

^^^not like having pro2's are a bad thing, my buddy made 227/162 on his rs machine piston b20/vtec build with them.

[Starrfire]

HEADER SOLD!!!

[blown_ss]

is the head tapped for lsvtec?

[Starrfire]

No, but I have a kit for it.

[Starrfire]

B16 Trans and gsr short block sold!!!

[teinman]

give me a call about h22a motor please 678 896 0683 jesse thanks

[Starrfire]

late night bump

[Starrfire]

bump

[justnprsh07]

Do you still have the h22a if so pm or call me 7065877278

[blown_ss]

how much for the head and kit?

[Starrfire]

^^^Pm'd

[Starrfire]

h22 and girdle sold!!!

[Black4DrEK]

Nothing wrong with the H22A?

[Black4DrEK]

Damn.. nevermind

[Starrfire]

^^^No there wasn't lol.

[Starrfire]

Bump, if you want this stuff you better get it b/c it's going fast.

[Starrfire]

TTT

[Starrfire]

Bump

[domo_junki]

what kind of shape is the b20 head in ? got bent valves in my LS so i need a head

[Starrfire]

^^^perfect, it's the same head. it has about 45k on it.

[Starrfire]

bump, if you buy the mani you get a free fuel rail.

[Starrfire]

bump

[Starrfire]

TTT

[Starrfire]

bump

[Starrfire]

Bump

[jerseyef9]

bump

[Starrfire]

Skunk2 Cams and IM sold!!!

[Starrfire]

bump

[g4mbutr0l]

pm'd

[Starrfire]

TTT sales pending

[Starrfire]

GSR head and bearings sold!!!
Fuel rail sold

[Starrfire]

TTT on a thread with few things left in it.

[dirtragz]

yo buddy , i want this stuff Edelbrock 65mm throttle body-$100
Rs machine pistons 81.5mm pr3 pistons on Ls rods with arp rod bolts-$100
tx me 2052106659 russell

[Starrfire]

pm'd

[jerseyef9]

bump

[Starrfire]

Rs machine pistons/rods sold
Edelbrock Throttle body sold.
Thanks Russel

[dirtragz]

Rs machine pistons/rods sold
Edelbrock Throttle body sold.
Thanks Russel

No problem , thanks for being a great seller . I will vouch fo you anyday . when ever you decide to sell anything else hit me up first

[Starrfire]

TTT