View Full Version : WTB: H22 or 23
schia89
08-02-2010, 02:26 PM
Im lookin for a cheap H22, H23, or a F20B. It doesn't have to be running but must be a complete longblock. Lmk what y'all have call or text me at (770)861-1712.
schia89
08-03-2010, 01:57 PM
Bump
VTECxRoCKz
08-03-2010, 03:44 PM
have a head with no intake mani n no vtec solinoid can use any b series vtec solinoid
but yeh 200 and you can get a block and after market pieces n u will be set just message me back thanks
schia89
08-04-2010, 07:49 PM
No thanks looking for a complete longblock
schia89
08-05-2010, 03:26 PM
Bump
jew_boy
08-05-2010, 04:02 PM
i got a block with oil pan a with complete head besides the throttle bodie, basicly everything but the rotating assembly offer me a price
Starrfire
08-05-2010, 10:24 PM
I've got one complete but its dissasembled.
schia89
08-06-2010, 08:04 AM
I've got one complete but its dissasembled.
How disassembled is it?
Starrfire
08-06-2010, 08:47 AM
Completely so, but it's 100% complete, and all the parts are in good condition. Also it has Brian Crower dual valve springs and retainers in the head. But I can take them out and put stockers back in if you don't want them. It also has a new OEM water pump and timing belt with 5k on them as well as the manual tensioner conversion. With the springs and retainers I'd probably take $500. It also comes with a spare head, distributor with basically new NGK plug wires. Lacks injectors though.
Big_Joe
08-06-2010, 08:50 AM
I have a H22a that has a hole in the block. But everything is there..
schia89
08-06-2010, 11:03 AM
Completely so, but it's 100% complete, and all the parts are in good condition. Also it has Brian Crower dual valve springs and retainers in the head. But I can take them out and put stockers back in if you don't want them. It also has a new OEM water pump and timing belt with 5k on them as well as the manual tensioner conversion. With the springs and retainers I'd probably take $500. It also comes with a spare head, distributor with basically new NGK plug wires. Lacks injectors though.
Pmd
schia89
08-06-2010, 11:04 AM
I have a H22a that has a hole in the block. But everything is there..
Is this the same one on craigslist?
andy97
08-13-2010, 02:42 PM
i have a h22a head and block it has bout 80000 miles on it im selling for cheap pm me
5thgenlevi
08-14-2010, 10:13 AM
ive got the full h23 swap, all put together, still in the car, about 140k on engine and trans, all stock as far as i know, no smoke, so leaks, will crank up and run with no problem, lmk
Powered by vBulletin® Version 4.2.2 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.