PDA

View Full Version : BEST!! Way to polish my blades?????



CodeRED-MVBC
08-02-2010, 11:15 AM
As it states, whats the best way to polish my blades?? I plan to prussure wash them, and see where that leaves me. Any hapl is useful!!!

Peace

psycho_freke
08-17-2010, 04:42 PM
These threads from one of my favorite forums may help you:

http://www.team-integra.net/forum/display_topic_threads.asp?ForumID=15&TopicID=264039&ThreadPage=1
http://www.team-integra.net/forum/display_topic_threads.asp?ThreadPage=2&ForumID=16&TopicID=93732
http://www.team-integra.net/forum/display_topic_threads.asp?ThreadPage=2&ForumID=161&TopicID=236799

r.etheridge
09-12-2010, 03:33 PM
if your looking for a quick way to get it done, I would bead blast them then start from 600 grit and work your way up to 2000. only problem with this method is that you may end up with tiny pits in them from the blasting. As long as you keep the gun far enough back from the wheel, you should be ok. But of course this will only work if you have access to a bead or sand blaster

Catnip
09-12-2010, 03:38 PM
I had a really nice, detailed write-up on here with pictures, that I spent about an hour or so writing up... and someone completely deleted it.

88NaCivic
09-14-2010, 04:02 PM
Dont rush this job, if you do they will never look good! Take your time. Start with a lower grtit go 400 first

CodeRED-MVBC
09-14-2010, 11:51 PM
thanks!! i poszted this a minute ago.. tryin to get a type sh lude.. sure after they get straight they'll be on here for sale!!!! But im scared to take sand paper to them.. no access to a sand blaster for me.. Ww in the boon docks!!! Thamks for all help you'll!!