PDA

View Full Version : Power Mods CAMS QUESTION ??


JVP
07-27-2010, 08:44 PM
WAT IS BETTER TYPE R CAMS OR PRO 3 CAMS FOR ALL MOTOR ON A GSR HEAD ?
Robinson
07-27-2010, 09:22 PM
What else is done to it like, What Compression are u running? What valvetrain are u running? all that plays a part in what u get ...
jhadleyh
07-27-2010, 09:24 PM
just put 2 Z06 cams in it.......
JVP
07-27-2010, 11:20 PM
WAT IS BETTER TYPE R CAMS OR PRO 3 CAMS FOR ALL MOTOR ON A GSR HEAD ?

Stock internals and aem cam gears that it
Robinson
07-27-2010, 11:43 PM
Stock internals and aem cam gears that it

Oh! then u will be good with the type r cams. The pro 3's are waaaaaay to big for that step up, Maybe some Pro1's but thats about it until u built the block
all-mota
07-28-2010, 05:17 PM
bigger is better all the way. lol

not being a dick but if you have to ask about the pr0 3 cams you have no reason to use them.

stay with smaller cams until you upgrade everything else
bigdare23
07-30-2010, 08:44 AM
I'm going to say Pro3s because I like the sound of metal to metal contact.
Z0_o6
07-30-2010, 10:05 AM
just put 2 Z06 cams in it.......

worked for me ;)
SPOOLIN
07-30-2010, 11:45 PM
I'm going to say Pro3s because I like the sound of metal to metal contact.

degree it in, then you won't get to hear those wonderful sounds.
bigdare23
08-01-2010, 04:14 PM
degree it in, then you won't get to hear those wonderful sounds.


I know that :wink:
JVP
08-24-2010, 07:17 PM
wat about type r cams on ls built head
Bacon
08-24-2010, 07:53 PM
wat about type r cams on ls built head

:thinking:
CodeRED-MVBC
08-24-2010, 08:08 PM
Type r cams in a ls head??? ahahahahahahaha. i bet you also gotta switch gears in your automatic to right????

Really.. i gotta 2000 gsr. all stock except basic bolt ons.. would tpre r's with dual coil springs be fine then tune my shit???
Bacon
08-24-2010, 08:14 PM
Type r cams in a ls head??? ahahahahahahaha. i bet you also gotta switch gears in your automatic to right????

Really.. i gotta 2000 gsr. all stock except basic bolt ons.. would tpre r's with dual coil springs be fine then tune my shit???

umm....you can manually change gears with an automatic and those cams would work with your car.

OP, doubt Type R cams will work on an LS head....highly doubt it. Best bet is to have goals in mind and decide from there. All parts can/will/should work in conjunction with each other. Stage 1 cams would do good with standard bolt ons while Stage 3 cams are usually race application but can do the job you are looking for. What exactly is your focus on all motor? How far are you wanting to go with it?