TURBO HELP PLEASE

[hondanate]

ok i have a jdm b18c in a 94(obd1) integra im in the process of boosting it and nee to b done before nopi next week im finishe with everything besides my resitior box. i have 450 dsm blue top injectors. everything i have read on how to wire says i should have for of the eight wires on the dead end clip that has power. im using a test light and its showing all eight have power....please help

[EmminoDaGreat]

lol you dont need to see which ones have power you need to see which ones have continuity to the injectors, and then cut them, then wire them in accordingly.

[hondanate]

alright does that mean i have to trace all of them back to the injectors by cutting the wrapping and electrical tape or is there other way of going about it
and thanks for the help its my first turbo

[SPOOLIN]

You really need to buy some wire and loom and do it right. Cut the power wires coming into the injectors and run them to the box's red wire and then the other wires run back to the injectors. The injectors when running receive a contant supply of 12v, the ecu grounds the injector to fire, just to let you now so you can imagine better whats going on.

[hondanate]

thanks

[j0nbunklah0m]

http://images.google.com/imgres?imgurl=http://www.6thgearadvertising.com/misc2/civic/turbo/resistor_box.jpg&imgrefurl=http://civic-eg.com/viewtopic.php%3Ft%3D10140&usg=__CPpIObK2knJP-01XFp_jkICiVGE=&h=792&w=792&sz=71&hl=en&start=1&um=1&itbs=1&tbnid=RpaglNwEg864yM:&tbnh=143&tbnw=143&prev=/images%3Fq%3Dresistor%2Bbox%2Binstall%2Bcivic%26um %3D1%26hl%3Den%26sa%3DN%26tbs%3Disch:1

dunno if u figured it out by now, but this is the site taht helped me out with it