.:My First Honda Build (Eg):. tons of pics

[jew_boy]

UPDATE ON PAGE 3 TOP & BOTTOM

OK I traded my awesome truck for this civic about 4 months ago, when i got it the car was shitty, the person who did the swap had a education level of Maybe 5th grade the wired a few sensor straight into the ecu and etc. but i drove it until the motor decide it was done it ended up spinning the middle main bearing, and on top of it the dumbfuck that put it together didn't know how to use a torque bar cause i had a flywheel bolt come all the way out, while i was at the track and could not use my clutch the rest of the night so i had to punch it in every gear almost, anyways i have redone this whole car, new interior & engine harness, carpet and etc. anyways onto the pics.

i got the car like this just minus it being slammed and the duckbill
231630 (http://i250.photobucket.com/albums/gg243/chevelleftw/66a5aedc.jpg)

now time to tear it down
231631
231632
231633
after a few different color we came to this one
231634

[jew_boy]

now that we decide the color time to apply it
http://i250.photobucket.com/albums/gg243/chevelleftw/05670d25.jpg
now time for a twist
http://i250.photobucket.com/albums/gg243/chevelleftw/f186ab4b.jpg
NONE OF THESE ARE STICKERS THEY ARE ALL PAINTED ON
http://i250.photobucket.com/albums/gg243/chevelleftw/266259ba.jpg
http://i250.photobucket.com/albums/gg243/chevelleftw/a747e17e.jpg
http://i250.photobucket.com/albums/gg243/chevelleftw/8fc0194e.jpg

[jew_boy]

i also decide to do my own brake line tuck
http://i250.photobucket.com/albums/gg243/chevelleftw/a7e6b439.jpg
http://i250.photobucket.com/albums/gg243/chevelleftw/25a047a1.jpg
End result
http://i250.photobucket.com/albums/gg243/chevelleftw/8c23302c.jpg
also my wire tuck and also shift linkage back in
http://i250.photobucket.com/albums/gg243/chevelleftw/2889322a.jpg

[jew_boy]

Now time to get on the interior, time to put all back together
http://i250.photobucket.com/albums/gg243/chevelleftw/282a3e63.jpg
http://http://i250.photobucket.com/albums/gg243/chevelleftw/b8eb16ad.jpg
http://i250.photobucket.com/albums/gg243/chevelleftw/4b3bdec5.jpg
http://i250.photobucket.com/albums/gg243/chevelleftw/f5fe73fa.jpg
http://i250.photobucket.com/albums/gg243/chevelleftw/d49a96f1.jpg
http://i250.photobucket.com/albums/gg243/chevelleftw/fee5b585.jpg
http://i250.photobucket.com/albums/gg243/chevelleftw/d4530e4c.jpg
http://i250.photobucket.com/albums/gg243/chevelleftw/f212592c.jpg
http://i250.photobucket.com/albums/gg243/chevelleftw/3d86ec84.jpg
and this is how it sitts now waiting to get a balance shaft block kit and then the motor will be together

[69goldenone]

looking good! i wish i had the resources to do my old hatch right like that. keep it up

[Glides]

Not bad. I like the Rising Sun Grenade paint but would for sure take the Powered by Honda off of it.

[quickdodge®]

Car doesn't look bad. Your truck was 100% better, though. Later, QD.

[Catnip]

Car doesn't look bad. Your truck was 100% better, though. Later, QD.

This.

[jew_boy]

Car doesn't look bad. Your truck was 100% better, though. Later, QD.

Thanks I wish I had never trade my truck for the eg but it had to go the police would leave me alone. Thy had my truck marked

[-EnVus-]

I hate those wheels and unless your gonna show of the SOHC the engine bay is pointless but it looks good.

[Captain-Obvious™]

Are you gonna get the paint off the struts?

[quickdodge®]

Thanks I wish I had never trade my truck for the eg but it had to go the police would leave me alone. Thy had my truck marked

And that car will help?

You know I had to ask. Later, QD.

[jew_boy]

And that car will help?

You know I had to ask. Later, QD.
I had my friend driving my truck, we were doing nothing wrong and a cop pulled a u turn out of no where and followed us forever

Yeah I thought about that when I got it. But if I keep it long enough I plan to paint it another color that's less grabbing.

[sicklol]

What motor's going in it now? looks like theres a B series head in the background lol.

[Catnip]

http://i250.photobucket.com/albums/gg243/chevelleftw/1272171710-1.jpg
F series FTW. Down for reconstruction

[Dylan]

awesome.this is my old car.im glad someone is doing something with it. and i cant belive it still has those wheels on it.the guy that i sold the car to stole those wheels from my room mate and sold it with them on it lol.good luck with it :goodjob:

[jew_boy]

What motor's going in it now? looks like theres a B series head in the background lol.
F22b1

awesome.this is my old car.im glad someone is doing something with it. and i cant belive it still has those wheels on it.the guy that i sold the car to stole those wheels from my room mate and sold it with them on it lol.good luck with it :goodjob:
I traded this wheels for some dr17 and traded them for polished blades which what will be on it

[Relentless]

nice build going on bro

[Dirty Octopus™]

Wooooooooooooooooow!!!! Mike you're a MONSTA!!! :crazy:

[JEY$JDM]

shweet

[EG_Ryder]

Looks nice, glad you didnt decide to change the color! love that blue

[jew_boy]

Are you gonna get the paint off the struts?
Yeah that is the plan


Wooooooooooooooooow!!!! Mike you're a MONSTA!!! :crazy:
Thanks man

[.:Stirfry:.]

wrd son. let me do your engine harness!.

[jew_boy]

wrd son. let me do your engine harness!.
Umm... No. I like all my guages to work lol

[Genji-Sama]

Likin the work so far, and lovin that color :goodjob:

[jew_boy]

Thanks man

[Red_EJ1]

looks good man, just not liking the brake/clutch lines.... lol on the guages thing.

[jew_boy]

Well I did it quick and did not want to drill and all that and run them inside the car. But the point is to hide the line which I did. So I'm happy with it

[jdm eg6]

nice work keep it up

[.:Stirfry:.]

Umm... No. I like all my guages to work lol

bit my car is a cx it didnt come with a rpm guage lol

[Brian*]

I want to build another Honda one day...

[alpine_aw11]

I was about to do a boosted f22 in my hatch before it got totalled. Some of the painted stuff in the bay is a little homo but you're doing it right.

[jew_boy]

Alittle homo? Why we gotto say that

[jew_boy]

Finally got the motor built and running perfect started it up with no CEL's runs amazing

[DeeAOne]

no more limp mode?

[jew_boy]

Fuk no. Idk if you remember seeing the interior harness I bought. But there were some wires on it that they said theory wired in vtec with so I left it and was just going to use it on mine. But they weren't for vtec some how on one of my injector plug had power coming on both sides of it, so I rewired what they did and it started up perfect and idles perfect

[DeeAOne]

good. now no excuses when you get waxed this friday at SDR. :)

[Red_EJ1]

^^^THIS^^^ THIS RIGHT HERE = BURN!!!!!!

[DarKStaR]

stock motor? f2b? what trans?

[jew_boy]

good. now no excuses when you get waxed this friday at SDR. :)
if i can get jose to cover for me ill be happy to let you be the first to watch me go across that finish line in front of you :)


^^^THIS^^^ THIS RIGHT HERE = BURN!!!!!!
No Sir

stock motor? f2b? what trans?
yeah its pretty much a stock motor, just light flywheel and F23 IM, and thats about it ... its a H/F tanny. i forgot what the code on the trans it but it like the shortest gearing one for the F/H series im trap at the end of 4th sometime 5th at the track

[jew_boy]

building the motor and final got it dropped and started
http://i250.photobucket.com/albums/gg243/chevelleftw/d3f80b08.jpg
http://i250.photobucket.com/albums/gg243/chevelleftw/1bd55135.jpg
lower half's done
http://i250.photobucket.com/albums/gg243/chevelleftw/7cc3e1cb.jpg
time for the rest
http://i250.photobucket.com/albums/gg243/chevelleftw/f531927b.jpg
http://i250.photobucket.com/albums/gg243/chevelleftw/ebe82905.jpg
http://i250.photobucket.com/albums/gg243/chevelleftw/d9122d95.jpg
Had to switch VC, dont want to mess it up
http://i250.photobucket.com/albums/gg243/chevelleftw/526adaaa.jpg
http://i250.photobucket.com/albums/gg243/chevelleftw/8299da2a.jpg
KA BAM yes i know i need headers idc i got plans for this motor so no need to buy headers
http://i250.photobucket.com/albums/gg243/chevelleftw/1a2131f3.jpg
http://i250.photobucket.com/albums/gg243/chevelleftw/6883456c.jpg

heres a hint for future plans
http://i250.photobucket.com/albums/gg243/chevelleftw/3977aa72.jpg

[blaknoize]

DO WORK LOL awesome

[FasTech]

Damn, Mike.. Didn't know the car pooped on ya. GL on the build man.. Need any help with grunt work, let me know.

[jew_boy]

Hey man u still working for troy

[efman]

this thing is sick!

[SlenderEG6]

like dude is that like a motor out of a da10?? the f22 right... i never heard of those motors... and how did you paint the engin bay?? was it hard?? and did you like have to get swap axles or did the stock b15 axles fit??

[DeeAOne]

i heard he had to cut and weld one axle. so we will both be driving off the line friday. lol

[jew_boy]

Dom stfu.. And louis in still going to drop the clutch

[.:Stirfry:.]

i got he hack saw now if you still need to use it.

[jew_boy]

Nah we are already done with the axle

[Jdm94Coupe]

good build. i always wanted to be boosted!

[SlenderEG6]

i heard he had to cut and weld one axle. so we will both be driving off the line friday. lol

smh.... loui u must have forgotten who welded that axle... mike feel free to fuck rev limiter in the ass and dump the clutch into the back seat with out worry!!


i got he hack saw now if you still need to use it.

bit you late


ps (to mike) shit you aint got enough power to break shit any damn way a hah... uh hah hah C:

[jmotley]

accord motor with boost? ballin ass build bro. +!

[Tree]

what axles were used?

[jew_boy]

For the pass side integer axle with a accord hub for the tranny and a cut and welded axle for driver side

[Tree]

For the pass side integer axle with a accord hub for the tranny and a cut and welded axle for driver side

oh wow, what about the mounts? you did some good work.. i want to see this car run

[aeaddy03]

very nice build bro! you did pretty good with the engine bay, maybe a lil happy with the other stickers(painted on) but the grenade is hot. the engine looks real good and cant wait to see it boosted. what are all those black in the background of that one pic lol? keep it up!

[jew_boy]

very nice build bro! you did pretty good with the engine bay, maybe a lil happy with the other stickers(painted on) but the grenade is hot. the engine looks real good and cant wait to see it boosted. what are all those black in the background of that one pic lol? keep it up!

Well I originally painted like 5 on there but then it made it look empty in some spots. What black thing you talking about... It says "do work" on the firewall if that's what u mean.

[jew_boy]

The mounts are all h22 swap mounts besides the driver side that is off a 94-97 ex accord. The f22b1 mount bracket it's different. The last person that had the car ghetto rigged a h22 mount to fit on there and my oil pan was realistically about 2 in off the ground. But now that's it's fixed it's got like 5 in clearance

[jew_boy]

so i had top make a axle some reason now of the axles i got a hold of would fit it. so i decide to take it to BYU. and made a custom axle and now it works perfect. already popped the clutch a few times and it holding
http://i250.photobucket.com/albums/gg243/chevelleftw/f95dc317.jpg
http://i250.photobucket.com/albums/gg243/chevelleftw/946ab485.jpg
the welds look pretty good in person.

and now im finally able to drive it. heres a pic outside my work. now all thats left is wire up vtec
http://i250.photobucket.com/albums/gg243/chevelleftw/66d26e64.jpg

ill get some better pics once it all done and clean

[xdavidscenex]

cant wait to get it out to the track!

[jew_boy]

Soon chris soon