PDA

View Full Version : 240sx (sr20) speedmeter not working



HMGDRFTER
07-14-2010, 08:49 PM
well i just swapped a sr20 in and it's not working, im missing a speed sensor does anyone know if the KA speed sensor will work? if not anyone know what speed sensor could work besides the jdm sr20? like the sr20 from the sentra? any help would be greatly appreciated. thanks.

Batlground
07-15-2010, 09:52 AM
the ka will work.

HMGDRFTER
07-23-2010, 08:08 PM
the ka will work.

i got the ka speed sensor, but i can't seem to find the speed sensor wire on the tranny any idea where it is? if it'snot there can i wire the wires from the speed sensor straight to somewhere so that the speedo will work?

HMGDRFTER
08-01-2010, 09:22 AM
i got the ka speed sensor, but i can't seem to find the speed sensor wire on the tranny any idea where it is? if it'snot there can i wire the wires from the speed sensor straight to somewhere so that the speedo will work?

???

yellowjacket
10-29-2010, 05:32 PM
The wiring is part of the wiring harness. In particular the part of the harness that also hooks up to the other sensors on the transmission. So you may just have it pinned somewhere you can't see it.

ae86guy
10-21-2011, 09:06 AM
Those wires should be Green and Green/White in the lower harness. They go to an 8-pin connector that connects to the body harness.