JJSPEC Racing Garage Sale V2.0-Hardcore Race Parts Inside

[JJSPEC Racing]

Here is a nice selection of parts and a couple of nice cars. I need to clear out some of these items to put money towards my next project. Please feel free to pm questions. We can take credit card. Shipping can be added and will be quoted as needed. Delivery of the cars or trailer can be arranged. Will be adding more items and pics so feel free to check back soon. Thanks for looking :)

First the vehicles:

DC2 Chassis:$2500
This is the single cam Integra from 2009. It has been converted to manual steering, has an RS roof skin(removed about 40 lbs), among other weight saving mods (i.e. insulation, sound deadening removal, etc).
10 point cromoly roll cage with parachute handle mount bar in ceiling. Cage can be certified for an extra $150.
Set up for H/F series.
Carpet, headliner, dash, and interior plastics included.
Front coilovers with adjustable KYB struts. The same setup from the Hot Rod which did 1.4 60’s.
Traction bar.

http://farm4.static.flickr.com/3399/4646858830_6b833d113b_b.jpg

JJSPEC Racing's 1995 Honda Civic Hot Rod Chassis(Race Car, VIN N/A) $2700:
Chassis only. Comes with:
Chromoly 12 point cage certified until 2010 with parachute mount wheelie bar mounts
1 piece rear axle setup that will accommodate factory or aftermarket brakes
Spare tire well removed and replaced with Aluminum
Eibach Springs Rear
Competition Engineering rear shocks
1 piece MB Products fiberglass front end
MB Products trunk lid
Lexan windows
Lightened Factory doors
Cromoly Wheelie Bars

http://i166.photobucket.com/albums/u116/jjspec/mir9.jpg

http://i166.photobucket.com/albums/u116/jjspec/mir7.jpg

http://i166.photobucket.com/albums/u116/jjspec/mir5.jpg

http://i6.photobucket.com/albums/y217/BoostedHonda/JJSPEC/image007.jpg

24 foot enclosed trailer. This is a great unit for hauling your race/show car. Has extra height roof, wide side door that you can bring a four wheeler through. Has some minor damage on R/F and R/R. Comes with a weight distribution hitch($400 value) and spare wheel(needs a tire). Paid $6500 new, asking for $4200:

http://i166.photobucket.com/albums/u116/jjspec/000_0002_00-1.jpg http://i166.photobucket.com/albums/u116/jjspec/000_0001_00-1.jpg


Wiseco Pistons PN#6566M81 B Series 81MM High Compression. Around 11.5-1 depending on head, head gasket thickness, etc. Around 1000 miles. $250:

http://i166.photobucket.com/albums/u116/jjspec/000_0001_02-1.jpg

H22 Killian's porting head w/BC springs/retainers. The retainers are not in the pic but have been since installed in the head: $1000

http://i166.photobucket.com/albums/u116/jjspec/head1.jpg

BC H22 Stage 3 Turbo Cams $325

http://i166.photobucket.com/albums/u116/jjspec/Cam1.jpg

http://i166.photobucket.com/albums/u116/jjspec/000_0003-10.jpg

BDL H22 Fuel rail(see above photo) $75

BDL 72mm throttle body(see above photo) $250

H22 Trans w/ welded spider gears. This was a spare unit to be installed in between rounds when there was not enough time to put the LSD in another trans. There is no picture but will get one if you need one. Looks like a stock tranny on the outside. $300

Kirkey drag seat(race car not included) $75

http://i166.photobucket.com/albums/u116/jjspec/000_0003_00-5.jpg

Halon Fire Supression System:$350
Safecraft LT10AAB. This system comes with a pull style cable for activation. Pic is a sales photo. Can get a pic of the system if you need it.

http://static.summitracing.com/global/images/prod/small/saf-lt10aab_w_s.jpg

Used Aeromotive Eliminator pump $300 (this pic is of an A1000 but it looks similar to the Eliminator):

http://i166.photobucket.com/albums/u116/jjspec/ChrisFew2.jpg

H22 forward facing exhaust manifold with dual 38 v band flanges. Puts a S37x compressor housing in front of the rad support of a DC2 $600:

http://i166.photobucket.com/albums/u116/jjspec/000_0001-12.jpg

http://i166.photobucket.com/albums/u116/jjspec/000_0001_00-4.jpg

One more pic with turbo above^^^


GReddy Kit for D-Series. Complete with everything including fmic. Does not have engine management. Came off of my personal car for upgrade $800. Can be installed for total of $1200 less ems and additional parts.

http://i166.photobucket.com/albums/u116/jjspec/000_0002-7.jpg

Misc fuel rails. Stock D/H/F/K $50. Aftermarket D $75:

http://i166.photobucket.com/albums/u116/jjspec/000_0005-4.jpg

Plenty of random intake and exhaust stock manifolds. Mostly Honda stuff but there is one 4G63 intake manifold. $60 per intake and 40 per exhaust 100 for Headers. PM if you have one you need:

http://i166.photobucket.com/albums/u116/jjspec/000_0005-6.jpg

H Series Skunk 2 Manifold from JJSPEC Racing Hot Rod(Ran 9.2 @158 on it)$225:

http://i166.photobucket.com/albums/u116/jjspec/000_0004-4.jpg

Complete H22 head from valve cover to headbolts $225:

http://i166.photobucket.com/albums/u116/jjspec/000_0002-6.jpg

ECUs. OBD1:P0A P14 PT6 PO6 P2P PR4 P2E PT6 OBD2: POB PAA K Series PNA

http://i166.photobucket.com/albums/u116/jjspec/000_0001-5.jpg

Stock Oil pans D/F/H Series $25

Stock Valve Covers $50 Can have bungs welded on for an addition fee.

JJSPEC Racing Lazer cut SS keytags $5.00:

http://i166.photobucket.com/albums/u116/jjspec/000_0002_02.jpg

[DarKStaR]

Bump for alot of good shit!

[1MP0RTL0V3R]

any of the headers for a d-series?

[JJSPEC Racing]

I will look in the am. Shoot me a pm if you havent heard from me by mid afternoon.

[Evil Goat]

is the price on the integra including the wheels, kirkey, etc?

[95turd]

is the turbo kit ac compatible

[JJSPEC Racing]

is the turbo kit ac compatible

It is.


is the price on the integra including the wheels, kirkey, etc?

No. Sorry for not being specific. A 10 point will run around $1500-2000 installed and the lightening especially the roof skin replacement are not cheap. The skin was replaced just like it would have been at the body shop. It has some good struts and other items that make it worth a little more.

[j0nbunklah0m]

the d-series kit comes with injectors/oil lines/tapped pan? also would u happen to have type-r IM/TB/camshaft? thx

[JJSPEC Racing]

I used the stock injectors up to 10lbs. It doesnt include a pan but I may be able to work something out if you are interested.

[Starrfire]

A real hot seller would be to have a lot of those sweet key chains at the next meet. I'll buy one.

[Theycall_Metue]

A real hot seller would be to have a lot of those sweet key chains at the next meet. I'll buy one.
lmao

some good parts i must say

[loa706]

that inercooler work with a supercharger? for a b series?

[justnprsh07]

Why are you getting rid of all this h stuff

[JJSPEC Racing]

that inercooler work with a supercharger? for a b series?

It will work with supercharger or turbo. Just would have to plamb it in like any other intercooler and find a place for the ice water tank. It would probably be pretty efficient.


i need one of the b series header for my da thanxs.pm me thanks again.

Sorry, headers are all gone. Need to edit post.


Why are you getting rid of all this h stuff

I dont need it right now and am trying to raise funds so I can start another project I have been wanting to do.

[Evil Goat]

ttt

[.:Stirfry:.]

NNNOOOOOOO

[JJSPEC Racing]

Yes! Buy something and have a piece of history!

[JJSPEC Racing]

Wheels are gone.

[Evil Goat]

bump

[justnprsh07]

bump for h parts

[JJSPEC Racing]

Now turbo and wheels are gone.

[JJSPEC Racing]

Intercooler setup gone as well.

[BlazinBubble]

thats alot of stuff..glws

[justnprsh07]

Pm me if you still have mani tranny clutch and axles

[JJSPEC Racing]

Drivetrain parts sold.