PDA

View Full Version : WTB P30 B16 pistons


integra82786
06-25-2010, 08:30 AM
As stated, I need some P30 B16 pistons. Don't want PR3s, too much compression. As new as possible is great and if you have new rings too that's even better. PM me, I check regularly. Thanks.
RHD_Joe
06-25-2010, 11:55 AM
hey man I got some USDM ITR pistons.. $75 LMK
integra82786
06-25-2010, 01:40 PM
im good thanks, just need some b16 pistons.
gerardojdm
06-25-2010, 04:54 PM
Actually, P30 pistons have higher compression than PR3.
integra82786
06-28-2010, 08:20 AM
I thought the pr3's were the higher compression pistons? I'm doing an all motor build and I want to stay around 11.5-12 compression. I can stay stock bore and just hone the block right?
gerardojdm
06-28-2010, 12:48 PM
I thought the pr3's were the higher compression pistons? I'm doing an all motor build and I want to stay around 11.5-12 compression. I can stay stock bore and just hone the block right?

For that I would suggest PCT/CTR pistons. P30 are higher than PR3. I have some brand new CTR pistons with wrist pins still in the box. $200. Depends on what block you looking to use. B16,B17,B18B/B, B18C have a stock bore of 81mm. B20 are 84.5mm
r.etheridge
06-28-2010, 06:07 PM
I have some PR3's with PR3 28 rods out of a jdm B16a with less than 20k. $125 lmk