Still not 100% but it's almost there

[AnthonyF]

Just waiting on my fairings to get painted then it's off to the tuner. w00t w00t

Mods/Additions:

-DynoJet PCV
-Driven Sprokets (-1/+2)
-EK Chain
-Thinner Headgasket
-8 Brand new Exhaust valve
-New stock filter
-MJS Exhaust (Leo Vince end of summer)
-FX35 Bi-Xenon with blue halo's
-300 Blue LED's all over
-Headlight cutoff switch
-tons and tons of new bearings and seals
-GPR V1.0 Damper (not installed yet, need bolts)
-Driven Gel Grips
-All the powder coating
-CRG Black Levers
-Blue LED's in cluser
-Fairings are getting painted gloss black (10/11 Winter comes custom air brushing..MUH HAAHAH)

Can't think of anything else....

Future:
1. Leo Vince
2. Evo Tech 1/4 gas cap
3. Mirror Block offs/CRG bar end mirrors
4. Redo powder coating on wheels, gonna go with black spokes/blue dish
5. Airbrush paintjob with helmet to match

http://i168.photobucket.com/albums/u180/TRYMY40/DSCN1200.jpg
http://i168.photobucket.com/albums/u180/TRYMY40/DSCN1199.jpg
http://i168.photobucket.com/albums/u180/TRYMY40/DSCN1198.jpg
http://i168.photobucket.com/albums/u180/TRYMY40/DSCN1197.jpg

-Ant.

[AnthonyF]

I believe it was BLK JDM that said this when I got my bike:

"knowing you Ant, in one year this bike is going to be ridiculous"

Well, I've had it for one Solid year this month. w00t...still got much more to do.

-Ant.

[aaronfelipe]

It's nekkid!

[Hondatwin23]

Johnny 5's cousin

[Goinfasterthanu]

damn ant get this thing done!!!

haha at the johnny 5 .... !

[AnthonyF]

She's alllllllll done. :) I went riding today, and the mother fucking left tank fairing flew off going down the highway. SHIT!!!!!!!

http://i168.photobucket.com/albums/u180/TRYMY40/bike04-1.jpg
http://i168.photobucket.com/albums/u180/TRYMY40/bike05-1.jpg

-Ant.

[Donati03gt]

looks sexy mang

[AnthonyF]

looks sexy mang
Thank ya!

-Ant.

[DirtyMechanic]

She's alllllllll done. :) I went riding today, and the mother fucking left tank fairing flew off going down the highway. SHIT!!!!!!!

-Ant.

so what your saying is. you should have someone that knows how to turn a wrench put your shit together... zing

[AnthonyF]

so what your saying is. you should have someone that knows how to turn a wrench put your shit together... zing
It's held on by little pieces of plastic and one tiny ass screw. These things are common to flying off. lol stupid Yamaha. lol

and ur an idiot since i put the entire bike together. lol. wub joo

-Ant.

[David88vert]

It's held on by little pieces of plastic and one tiny ass screw. These things are common to flying off. lol stupid Yamaha. lol


Those pieces of plastic and screws hold everyone else's parts on at 160+mph. Parts don't fall off if they are put on properly. Hell, if just the one screw only was on, it shouldn't fly off.

[AnthonyF]

Those pieces of plastic and screws hold everyone else's parts on at 160+mph. Parts don't fall off if they are put on properly. Hell, if just the one screw only was on, it shouldn't fly off.

when the plastic is warped, it won't hold on properly. I think I know a thing or two. ;)

-Ant.

[DirtyMechanic]

when the plastic is warped, it won't hold on properly. I think I know a thing or two. ;)

-Ant.

why do you have warped parts on your bike when you did this whole build up...? hrmm... your not my type.

[David88vert]

when the plastic is warped, it won't hold on properly. I think I know a thing or two. ;)

-Ant.

How did it get warped? It is molded from the factory. Unless you stored it in a different position while you were taking everythign apart, it shouldn't be warped. Even so, if the screw was in and tight, it still wouldn't fly off. Either you didn't have the screw in, or didn't tighten it, so it would back out.
Either way, now you have to invest in new tank trim.

[Hondatwin23]

overall the bike is sexy, can i take it out on a date

[AnthonyF]

why do you have warped parts on your bike when you did this whole build up...? hrmm... your not my type.


How did it get warped? It is molded from the factory. Unless you stored it in a different position while you were taking everythign apart, it shouldn't be warped. Even so, if the screw was in and tight, it still wouldn't fly off. Either you didn't have the screw in, or didn't tighten it, so it would back out.
Either way, now you have to invest in new tank trim.Probably from the sanding. I had to get into it pretty hard to get rid of the textured look. Looking at the right side tank fairing, the tip isn't being held on either. I'm going to remove it and see what I can do. maybe 3m 2x sided tape should help. The screw is on the back end of the piece. If the wind catches it, it'll rip that little piece of plastic right off. The screw and part of the plastic is still mounted to my tank.

You guys act like I don't know what I am doing so instead of suggesting things, you act like a bunch of assholes.


overall the bike is sexy, can i take it out on a dateThanks mang. It'll be at bp/var/vor thursday :)

-Ant.

[slow_hatch]

Hopefully the rest of the bike was put together better...... Looks good though

[AnthonyF]

Hopefully the rest of the bike was put together better...... Looks good though

haha it was, lock tite every wurr.

-Ant.

[BLK JDM]

Looks VERY Nice Ant!! Hopefully I'll be starting another project soon myself. Maybe back to the Yamaha camp!!

[Blitanicle99]

THEM FX35 look sick!

[David88vert]

Probably from the sanding. I had to get into it pretty hard to get rid of the textured look.


Ok, that explains a lot. You may have sanded it a little thin, try using some fiberglass to thicken it up, and get it smooth. It might help to start with new trim, which you should be able to find on the WERA board pretty cheap.

[AnthonyF]

I'm gonna buy new pieces soon. The tabs on the front broke off so that's why it isn't holding in place. No1 even notices with sessi headlights like those. oww oww. lol

-Ant.