Dark Pony XS
11-08-2005, 11:22 AM
I seriously need to get rid of this stuff..everything works excellent..i just have bills....please know that i am on the west coast and will have to ship if interested...but i have a good rep on ebay and with importsnc.com
make offers on any of this stuff, i'm willing to let go for a good deal...!! I need to pay some bills..ok lots of bills...
Aerogear battle series front bumper for a 94-97 integra. This bumper has only been taken out of the box to take pictures..it is brand new...
http://img.photobucket.com/albums/v257/Countrystreetrcr/HPIM0597.jpg
Next is a python alarm..used for 2 weeks in my car. keyless entry works perfect
http://img.photobucket.com/albums/v257/Countrystreetrcr/python_alarm.jpg
I have 2 12' JL audio subs as well as 2 mtx amps (one amp is 202 model the other is 342 model). I had the 202 amp running my door speakers and the 342 amp running my subs..sounds great and hits hard.
http://img.photobucket.com/albums/v257/Countrystreetrcr/niceback.jpg
http://img.photobucket.com/albums/v257/Countrystreetrcr/PICT0608.jpg
Specs on the subs and 2 amps:
http://www.epinions.com/content_53924040324 <~~review on the subs
Product Description:
• Nominal Diameter: 12 inches (300 mm)
• Continuous Power Handling: 125 Watts
• Voice Coil: 1.38" diameter, 6-layer, Kapton former
• Single 8 ohm Voice Coil
• Xmax (one-way, linear): 0.34" (8.6 mm)
• VRC™ Technology: The patented VRC system cools the voice coil and mechanically locks the critical joint between the spider, cone and voice coil former, resulting in exceptional reliability
• Work well in compact enclosures
• Class-leading excursion capabilities
• Work in sealed, ported and even bandpass enclosures
Subwoofer Specifications:
• Subwoofer Size 12"
• Impedance 8 ohms
• Dual Voice Coil No
• Peak Power Handling 300 watts approx.
• RMS Power Handling 125 watts
• Surround Material Foam
• Sealed Box Volume 1.0 - 1.75 cubic ft.
• Ported Box Volume 1.75 - 2.75 cubic ft.
• Sensitivity 87.6 dB
• Frequency Response N/A
• Top Mount Depth 6"
• Cutout Diameter 11"
1 mtx 202 amp...here's the specs:
mtx 202 amp info
Amplifier Type
Dual Channel
Bridgable
Bridgable
RMS Power at 4 Ohms 35 W x 2
RMS Power at 2 Ohms 70 W x 2
Performance
Frequency Response 20 Hz - 20000 Hz
Signal to Noise Ratio
100 dB
THD at Rated RMS Power 1 %
Crossover / Equalizer
High - Pass Frequency 85 Hz - 85 Hz
Other Features
Input Voltage 12.5 volt
MOSFET Circuitry Yes
3 Way Ready Yes
Dimensions
Width 8 in.
Depth 9.75 in.
Height 2.1 in.
1 mtx 342 amp. here's the info on it:
• 120 watts RMS minimum to 170 watts maximum x 2 at 2 Ohms
• 240 watts RMS minimum to 340 watts maximum x 1 at 4 Ohms
• Tri-Way capable
• PWM MOSFET switching power supply
• Speaker-level inputs
• Preamp outputs
• Heavy-duty, nickel-plated terminal connectors
• A real-time computerized protection circuit
• Intelligent Surface Mount Technology
• 10.7” x 9.75” x 2.1”
I also have a digi cam (hp photosmart 812) with docking station and printer.
Make an offer on anything i';m willing to set go for a good deal...
make offers on any of this stuff, i'm willing to let go for a good deal...!! I need to pay some bills..ok lots of bills...
Aerogear battle series front bumper for a 94-97 integra. This bumper has only been taken out of the box to take pictures..it is brand new...
http://img.photobucket.com/albums/v257/Countrystreetrcr/HPIM0597.jpg
Next is a python alarm..used for 2 weeks in my car. keyless entry works perfect
http://img.photobucket.com/albums/v257/Countrystreetrcr/python_alarm.jpg
I have 2 12' JL audio subs as well as 2 mtx amps (one amp is 202 model the other is 342 model). I had the 202 amp running my door speakers and the 342 amp running my subs..sounds great and hits hard.
http://img.photobucket.com/albums/v257/Countrystreetrcr/niceback.jpg
http://img.photobucket.com/albums/v257/Countrystreetrcr/PICT0608.jpg
Specs on the subs and 2 amps:
http://www.epinions.com/content_53924040324 <~~review on the subs
Product Description:
• Nominal Diameter: 12 inches (300 mm)
• Continuous Power Handling: 125 Watts
• Voice Coil: 1.38" diameter, 6-layer, Kapton former
• Single 8 ohm Voice Coil
• Xmax (one-way, linear): 0.34" (8.6 mm)
• VRC™ Technology: The patented VRC system cools the voice coil and mechanically locks the critical joint between the spider, cone and voice coil former, resulting in exceptional reliability
• Work well in compact enclosures
• Class-leading excursion capabilities
• Work in sealed, ported and even bandpass enclosures
Subwoofer Specifications:
• Subwoofer Size 12"
• Impedance 8 ohms
• Dual Voice Coil No
• Peak Power Handling 300 watts approx.
• RMS Power Handling 125 watts
• Surround Material Foam
• Sealed Box Volume 1.0 - 1.75 cubic ft.
• Ported Box Volume 1.75 - 2.75 cubic ft.
• Sensitivity 87.6 dB
• Frequency Response N/A
• Top Mount Depth 6"
• Cutout Diameter 11"
1 mtx 202 amp...here's the specs:
mtx 202 amp info
Amplifier Type
Dual Channel
Bridgable
Bridgable
RMS Power at 4 Ohms 35 W x 2
RMS Power at 2 Ohms 70 W x 2
Performance
Frequency Response 20 Hz - 20000 Hz
Signal to Noise Ratio
100 dB
THD at Rated RMS Power 1 %
Crossover / Equalizer
High - Pass Frequency 85 Hz - 85 Hz
Other Features
Input Voltage 12.5 volt
MOSFET Circuitry Yes
3 Way Ready Yes
Dimensions
Width 8 in.
Depth 9.75 in.
Height 2.1 in.
1 mtx 342 amp. here's the info on it:
• 120 watts RMS minimum to 170 watts maximum x 2 at 2 Ohms
• 240 watts RMS minimum to 340 watts maximum x 1 at 4 Ohms
• Tri-Way capable
• PWM MOSFET switching power supply
• Speaker-level inputs
• Preamp outputs
• Heavy-duty, nickel-plated terminal connectors
• A real-time computerized protection circuit
• Intelligent Surface Mount Technology
• 10.7” x 9.75” x 2.1”
I also have a digi cam (hp photosmart 812) with docking station and printer.
Make an offer on anything i';m willing to set go for a good deal...