fS: p28 civic ecu

[Nfire247]

SOLD


like the title says, its virgin, but i could chip it, it costs about $20 for the parts.

Looking for $80 bux obo...now $75obo

http://i372.photobucket.com/albums/oo161/Nfire247/Thread%20pics/IMG_2219.jpg

PM me or call/txt 478-538-4037
Logan Adams

Located in WarnerRobins,GA

[project_EM1]

need this lmk if its still up for sale

btw is it for a manual tranny or auto

[Nfire247]

yeah its still for sale, its for a manual i believe

[Nfire247]

bump

[Nfire247]

i've gotten some questions, and i guess i need to clarify.

This ecu is 100% untouched. "virgin"

I can chip and socket it, i will charge $20 in addition to the price of the ecu. This will allow you to properly tune your setup. I can also burn a basemap to a chip and will include a stock map with the chipped/socketed ecu.

any questions i'll be happy to answer

[redcivic]

i've gotten some questions, and i guess i need to clarify.

This ecu is 100% untouched. "virgin"

I can chip and socket it, i will charge $20 in addition to the price of the ecu. This will allow you to properly tune your setup. I can also burn a basemap to a chip and will include a stock map with the chipped/socketed ecu.

any questions i'll be happy to answer

you can chip it? like tune it? lol.

[Nfire247]

i can socket and chip it. That will allow the buyer to take this ecu to a dyno and get it tuned. In the mean time, i have the equipment to burn a chip that will run the car well enough to get it to a tuner, called a basemap. If the engine this ecu is being set up for is stock, these basemaps are sufficient to just drive on, so in that case, yes i can "tune" this ecu (made for a d16z6) to run a B16, B18, or other D-series motor. If the engine requires more than a stock tune, a dyno tune will be necessary.

make sense?

[Catnip]

Bump for a good seller! Sorry I couldn't get this Logan!

[Nfire247]

thanks man, price drop! $75

[redcivic]

i can socket and chip it. That will allow the buyer to take this ecu to a dyno and get it tuned. In the mean time, i have the equipment to burn a chip that will run the car well enough to get it to a tuner, called a basemap. If the engine this ecu is being set up for is stock, these basemaps are sufficient to just drive on, so in that case, yes i can "tune" this ecu (made for a d16z6) to run a B16, B18, or other D-series motor. If the engine requires more than a stock tune, a dyno tune will be necessary.

make sense?

yeah i understand now, I was alittle confused by the first post. good shit.

[Nfire247]

haha ok man, thanks