TypeR snooze
05-17-2010, 03:56 PM
Alright I got done doing the engine harness swap in my ek new harness was in way better shape but the new harness has a couple extra plugs, I didn't worry much. What did worry me was the new harness did not have the connector for the crank sensor so I looked on the harness and found a plug that kinda looks like it so I cut it off and adjusted the one from the old one to the new one. The car turned on just fine but the check engine came on I assumed it was the crank sensor, (I didn't know if it was the ryt spot to connect the old cranksensor so I just twisted the wires, mind u I was guessing.) So I untwisted the wires and just switched them around but the CE light was still on but while I was untwisting them the wire touched the side of the head and made a spark. Now the car ain't starting. Doesn't turn over.
Before I twisted the wires I checked the code to see what it was it gave out 41 at first but after the wire ordeal it now shoots out 20. Two long blinks and no blink after. Four long blinks then one short blink.
Before I twisted the wires I checked the code to see what it was it gave out 41 at first but after the wire ordeal it now shoots out 20. Two long blinks and no blink after. Four long blinks then one short blink.