"I'm getting married SELL" GSR SWAP, Spoon Exhaust, ROTA WHEELS, ETC.

[drtyhatch]

SOLD

[RutRoe]

Bump for a great seller... those wheels are like 2 weeks old...

[Soloboy]

Hey Would you trade for my MINT 16" Slipstreams for those Gold Gt3s mine have about 95% Thread left....

[drtyhatch]

thanks rut. I don't want to sell them but i figure wheels are wheels and i can always get another set after things calm down a bit.

[drtyhatch]

just trying to sell right now man, but if it comes down to it, i would need some cash on top. I have $850 in these wheels and tires and they have only been on my car for 10 days and only driven about 6 of those days.

[Bishop]

you wouldnt happen to have a rear lip you want to sell do you? And is the exhaust cat back?

[Soloboy]

Ill give you my Slips + 250...

Oh yeah I have a Friend that might be Interested in the Exhaust, Do it fit 2dr tegs??? Let me know!

[drtyhatch]

you wouldnt happen to have a rear lip you want to sell do you? And is the exhaust cat back?
the exhaust is axle back only and it cost $425 new.

I don't have a rear lip anymore. sorry.

[Vuongy_Dong]

If i wasn't going to buy some sparco seats this thursday, I would jump on this.

[drtyhatch]

Ill give you my Slips + 250...

Oh yeah I have a Friend that might be Interested in the Exhaust, Do it fit 2dr tegs??? Let me know!
that might work man.

the exhaust fits a 2dr as far as i know, we can always set it up to the car and see if it will fit for sure.

[drtyhatch]

If i wasn't going to buy some sparco seats this thursday, I would jump on this.
LOL dont' buy the seats then. haha just buy my stuff.

[ythao7984]

how much miles is on the motor?

[Pher]

Is that a true spoon axle back? The tip looks a little long to be a spoon...

[xXnimbusXx]

wuzup man, I bought that indash from u. my friend might be interested in getting the front lip. Would u go lower then that?...

[drtyhatch]

Is that a true spoon axle back? The tip looks a little long to be a spoon...
yes its a real spoon, that looks like an axleback for a different car, i'll try and get some other pics of some spoon axlebacks for reference though.

Nimbus:: i'll take $80 for the lip.

The Engine and transmission have around 15K miles on it.

[drtyhatch]

spoon sold.

[D16Civic]

how many miles are on the motor, preferably total and after rebuild

[drtyhatch]

The gauge cluster in the car that this engine came from read 117K miles but i think it was more like 130k because when i did a carfax on the car it said last mileage when the title was renewed was 120k miles

the engine since rebuild has around 12k-15k miles on it, i've changed the oil 3 times.

[drtyhatch]

wheels and lip are pending.

[drtyhatch]

leaving work bump

[99ITRGIRL]

congrats!!

[drtyhatch]

congrats!!
thanks


wheels are sold.

[drtyhatch]

spoon exhaust is sold.

[drtyhatch]

bump for the morning.

cmon people buy this swap.

Lip is still for sale too.

Amp is OBO.

[drtyhatch]

bump because i'm an absolute idiot and did my compression test wrong... i redid the compression test today with the throttle wide open and i got.... 210-211-211-210

[drtyhatch]

bump

[i4_garage]

i am interested in the swap.....is the swap already taken out of the vehicle or we have to do it or u do it?....

[drtyhatch]

I'll take the swap out, i'm kind of leaving it in untill i have a buyer because i still drive the car on the weekends some. If someone wants it then i will take a downpayment and the balance after the engine is taken out of the vehicle.

[speedminded]

Is that a real cf sparkplug cover? ...you want a stock gs-r to put on maybe???? *free bump*

[drtyhatch]

yes its real carbon fiber and i'll sell it for $50. Its decent there are nicer ones out there but they sell for much more.

[i4_garage]

alright....i have cash in hand...but only 1700$.....wat u think?...i can trade in some things if u want or need?

[drtyhatch]

what else do you have to make up for the $300???

[i4_garage]

hummm i got civic SI interior if u want?....

[drtyhatch]

what does that include just the seats? front and rear or door panels too? i may be interested in that.

[drtyhatch]

also when do you want it, i can pull it out this week and get it to you on Thursday evening.

[drtyhatch]

bump still for sale, first person to get me the cash gets it. VinhbodyS seems to be serious but it will still be forsale untill i see some cash.

[i4_garage]

i must still confirm that i will buy an EK that this guy is selling me first, but hopefully i can come to a deal by friday, his Ek comes with si interior, front seats and rear, so u can still put forsale on the engine, i will let u know asap if i will get it or not by friday

[speedminded]

yes its real carbon fiber and i'll sell it for $50. Its decent there are nicer ones out there but they sell for much more.Hmm...where are you located? Ever up the gwinnett or alpharetta area?

[drtyhatch]

nah not really, i'm in macon so most of my dealings i have to meet halfway, i can ship it i guess.

[speedminded]

nah not really, i'm in macon so most of my dealings i have to meet halfway, i can ship it i guess.got any more pics of it?

[drtyhatch]

no but i'll see if i can get some for you.

[JDMracer16]

Didn't you have some clean polished slipstreams? Anyways, do you still have that front lip, if so how much and do you think it will fit a del sol? also is it painted or carbon fiber or what?

[drtyhatch]

yeah i have a set of clean polished slips but they aren't for sale.

the lip is sold but it will definetly not fit a del sol.

thanks though.

[urban]

i might be interested in taking the motor for $2000, pm me with full info on motor

[drtyhatch]

i might be interested in taking the motor for $2000, pm me with full info on motor


It won't let me pm you. so i'll just post everything up that you will need to know

motor and tranny has about 15k miles on freshening up.
new rings, bearings, headgasket, timing belt, water pump, thermostat, water pipe o-rings, both crank seals, oil pan gasket, vtec solenoid gasket, distributer o-ring, valve cover gasket set, new rotor button, cap, plugs and wires.

basically everything is brand new. The transmission has all new synchros and shifts perfect. Pressure plate feels spoungy but the disc grabs good, timing belt is slightly too tight so it whines a little bit, the cam seals on timing belt side leak a tiny amount of oil. The inner and outer top timing belt covers are missing but doesnt' really effect anything. I think thats about it.

The engine is ready to drop in and drive, very reliable, never given me any problems at all.

I will include the shift linkage, the header, the carbon fiber spark plug cover, and ECU with the swap, The only thing i'm not including is the AXLES. I need those for my integra and i just don't really see any point and going to buy new ones when i have these right here.

I will sell the LONGBLOCK seperately for $1500 but will not include the Header or anything else. It will just be a complete longblock with harness and all.

[i4_garage]

can u list wat is included in teh lONgBLock?....is the ECU included?.....how about shift linkage?....

[drtyhatch]

yeah, this is what is included with the longblock.

THe only thing i will include for $1500 is the ECU, the shift linkage and header i will keep but will include a factory exhaust manifold.

I'm not gonna short change myself, this is already cheap as hell, $1500 is the cheapest i will go on the longblock itself. You will get the whole engine the only thing i'll be taking off is the tranny, shiftlinkage, and header. you'll get the whole wiring harness and injectors.

[drtyhatch]

all this talk and no action.

[Dave]

looks like a clean swap

[drtyhatch]

it is very clean and thanks for the bump.

[drtyhatch]

up again.

[Jdm94Coupe]

jw, would you trade for another gsr motor plus cash? with 180k miles....

[drtyhatch]

jw, would you trade for another gsr motor plus cash? with 180k miles....
compression #'s and how much cash?

[drtyhatch]

OMG this is rediculous.

[dutuINC]

can you lower the price???

[drtyhatch]

NO!!!! Have you people looked to see how much GSR swaps are? $2700-$3500.

this one only has 15k miles since rebuild. Runs just as strong. $2000 FIRM.

At that price i ought to have sold this thing the first day.

If nobody buys it soon i'm keeping it and boosting it.

[i4_garage]

aight man....keep everything in it ...tranny , ecu, hearders, everything....1800 cash....i jsut made 100 today..added to my 1700.....i told u that i would come back by friday to let u know..and now i am.....please consider

[drtyhatch]

pm's replied.

VinhbodyS, your offer is fine if we can work something out on the difference.

[speedminded]

pm's replied.

VinhbodyS, your offer is fine if we can work something out on the difference.you gonna be at the drift expo? I'd love to get that cover :)

[drtyhatch]

no not planning on being there. I think i have a buyer for the swap so if it falls through then i'll get you pics and send them to you.

[drtyhatch]

still here still waiting on the right buyer.

[Team Chaos]

How much would u take 4 the tranny...call me 478-447-8548-Josh

[LQQKITZME]

i am intrested in the GSR swap, how many miles does it have after the rebuild...

[RISKYB]

who did the valve cover for you, and is it paint or powder coat couldnt really see the pic that well

[drtyhatch]

sold on Friday....

I did the valve cover myself and its paint.

[95 Integra]

sold on Friday....

I did the valve cover myself and its paint.


It was about time....especially at that price.

[drtyhatch]

It was about time....especially at that price.
yeah tell me about it. some kid in Cumming is gonna be REal happy soon. I think i'm gonna call him and buy his single swap from him.