Log in

View Full Version : jdm-civic tries to paint



jdm-civic
05-13-2010, 04:36 PM
ok so i had a off day today and got kinda bored so i got the idea to try to paint a lil bit just to try it out.........

This is what the sides of my car and spoiler looked like before
http://sphotos.ak.fbcdn.net/hphotos-ak-sjc1/hs607.snc3/31984_390774833877_779918877_4098873_4064745_n.jpg

knew i had to get sand paper and it was only $2 so um, yeah
http://sphotos.ak.fbcdn.net/hphotos-ak-ash1/hs330.ash1/28664_390775583877_779918877_4098878_2072680_n.jpg

The paint i used
http://sphotos.ak.fbcdn.net/hphotos-ak-sjc1/hs607.snc3/31984_390775713877_779918877_4098880_2184160_n.jpg

After sanding a bit
http://hphotos-sjc1.fbcdn.net/hs607.snc3/31984_390776198877_779918877_4098883_2940550_n.jpg

looks funny spoilerless!
http://hphotos-snc3.fbcdn.net/hs607.snc3/31984_390776343877_779918877_4098886_5666615_n.jpg

oh yeah, sanding works good
http://sphotos.ak.fbcdn.net/hphotos-ak-ash1/hs547.ash1/31984_390776983877_779918877_4098894_6680667_n.jpg

Decided to paint my intake while i was at it!
http://sphotos.ak.fbcdn.net/hphotos-ak-ash1/hs547.ash1/31984_390777313877_779918877_4098908_2439195_n.jpg

what it used to look like
http://sphotos.ak.fbcdn.net/hphotos-ak-sjc1/hs036.snc3/12416_336430463877_779918877_3616689_5334852_n.jpg

looks a lot better IMO
http://hphotos-snc3.fbcdn.net/hs607.snc3/31984_390777628877_779918877_4098910_7660720_n.jpg

looks pretty good!but i think im too lazy to wet sand it and clear when it dries soooo yeah
http://sphotos.ak.fbcdn.net/hphotos-ak-ash1/hs547.ash1/31984_390813183877_779918877_4099462_5659754_n.jpg

also painted my side moldings which were very ashy and gray, now, nice and black
http://sphotos.ak.fbcdn.net/hphotos-ak-sjc1/hs607.snc3/31984_390813498877_779918877_4099470_6240717_n.jpg

for my first time,i think i did a decent job and it looks a lot better then faded and ashy gray!!! What ya think?

jdm-civic
05-13-2010, 04:59 PM
i think hood painting is coming up next!!

punkr6
05-13-2010, 05:01 PM
lol

-EnVus-
05-13-2010, 05:05 PM
Wow are you serious.....

jdm-civic
05-13-2010, 05:06 PM
^^what you mean?

97_c1vic
05-13-2010, 05:06 PM
Looks like shit. /Thread

Boosted FC
05-13-2010, 05:08 PM
I guess you gotta do what you gotta do when you are on a budget.

jdm-civic
05-13-2010, 05:09 PM
^^ya, wasnt trying to pay $60 for something i did in $7

Drummerboy
05-13-2010, 05:12 PM
doesn't look bad to me. but I say wet sand and clear coat.

jdm-civic
05-13-2010, 05:21 PM
^^ THANKS.im too lazy to do it though,it might look a little better tho!

JessAlba452
05-13-2010, 05:44 PM
For your first time that's not bad at all. :) I used to rattle can stuff all the time and once you do a nice clear coat and polish it out people couldn't even tell it was rattled lol. I had to tell em' :) Best of luck on your future painting!

jesus bonill
05-13-2010, 05:48 PM
For your first time that's not bad at all. :) I used to rattle can stuff all the time and once you do a nice clear coat and polish it out people couldn't even tell it was rattled lol. I had to tell em' :) Best of luck on your future painting!

hmmm....jdm civic...i would listen to the words of the mistress...shes a pretty good painter :yes:

JessAlba452
05-13-2010, 05:58 PM
^
LoL thanks :) I've done away with the rattle can for an HVLP setup for a while now. Much more in cost, but it's handy to have lol. :) BTW love your sig! +reps!

jesus bonill
05-13-2010, 06:35 PM
^
LoL thanks :) I've done away with the rattle can for an HVLP setup for a while now. Much more in cost, but it's handy to have lol. :) BTW love your sig! +reps!

gracias liza!....when you getting a Z again?

jdm-civic
05-14-2010, 01:31 PM
^
LoL thanks :) I've done away with the rattle can for an HVLP setup for a while now. Much more in cost, but it's handy to have lol. :) BTW love your sig! +reps!

what does HVLP stand for?

claybird
05-14-2010, 01:37 PM
ehhhh

G.C
05-14-2010, 02:17 PM
You get what you pay for. Don't forget that.

Catnip
05-14-2010, 02:26 PM
... So you don't haz vtak.

Genji-Sama
05-14-2010, 02:36 PM
You get what you pay for. Don't forget that.

I've seen some dayum good rattle can jobs before, sometimes skill and luck factor in. Besides this looks pretty decent, but I would go ahead and put a clear coat on

gforce71
05-14-2010, 02:48 PM
what does HVLP stand for?

high volume, low pressure. its your typical professional painters spray gun.

bu villain
05-14-2010, 03:06 PM
Did you use high heat paint on the intake?

tK FuRy
05-14-2010, 04:26 PM
I've become a monster with a rattle can lol, but I still prefer the good old fashion paint gun :)

jesus bonill
05-14-2010, 04:38 PM
... So you don't haz vtak.

yeahh...whats up with the sig sayin i haz vtak?:thinking:

StarBwoy
05-14-2010, 04:50 PM
look way much better bro:goodjob:

jdm eg6
05-14-2010, 08:18 PM
looks good i did the same thing to my hatch except i sprayed the whole car and it came out good

cactusEG
05-14-2010, 10:20 PM
Quit being cheap. Save up money and do it right !

Bacon
05-14-2010, 10:40 PM
... So you don't haz vtak.

You didn't know that is the vtak valve cover and not the vtec model........:ninja: :dunno:


Quit being cheap. Save up money and do it right !

This, definitely this.

jdm-civic
05-14-2010, 11:52 PM
... So you don't haz vtak.

The intake is off of my ls crx. but i assure you, the hatch has all the BTAK in the world

Catnip
05-15-2010, 01:23 AM
The intake is off of my ls crx. but i assure you, the hatch has all the BTAK in the world


I don't know what "btak" is, but this...

http://sphotos.ak.fbcdn.net/hphotos-ak-sjc1/hs036.snc3/12416_336430463877_779918877_3616689_5334852_n.jpg

isn't vtec...

jdm-civic
05-15-2010, 04:38 AM
I don't know what "btak" is, but this...

http://sphotos.ak.fbcdn.net/hphotos-ak-sjc1/hs036.snc3/12416_336430463877_779918877_3616689_5334852_n.jpg

isn't vtec...

This is my crx, not my hatch!!!

jdm-civic
05-15-2010, 04:40 AM
This is under the hatch's hood
http://sphotos.ak.fbcdn.net/hphotos-ak-sjc1/hs637.snc3/31984_390791923877_779918877_4099250_1119679_n.jpg

Z0_o6
05-15-2010, 04:53 AM
still looks like shit.

jdm-civic
05-15-2010, 04:55 AM
^^blah blah blah blah

Bacon
05-15-2010, 07:23 AM
and the tape on the headlights is cool or wut?

jdm-civic
05-15-2010, 07:44 AM
ive done it to every car ive ever owned.its just what i do!

Bacon
05-15-2010, 07:46 AM
to each his own.

quickdodgeŽ
05-15-2010, 07:47 AM
and the tape on the headlights is cool or wut?

Road racers use tape on the head lights to keep the glass from going all over the road should a rock or something crack the lens. I'm guessing that's the case here. Later, QD.

Bacon
05-15-2010, 08:02 AM
I know QD. To my understanding it's a safety thing required by road racing rules incase you bump into the walls or stuff like that.

jdm-civic
05-15-2010, 12:59 PM
just a little something i do, nothing serious!

Bacon
05-15-2010, 01:06 PM
No worries man. Doesn't look that bad. I will likely be doing the same thing if I can find the color to match my Samba Green Sol.

Catnip
05-15-2010, 01:27 PM
This is under the hatch's hood
http://sphotos.ak.fbcdn.net/hphotos-ak-sjc1/hs637.snc3/31984_390791923877_779918877_4099250_1119679_n.jpg

Why don't you put that head on the CRX, and have an almost cool car... instead of two that suck.

jdm-civic
05-15-2010, 01:42 PM
long story short, theres a b20 vtec waiting for the crx and the hatch is my daily, im just collecting parts as i go, no big rush!