View Full Version : 1st Gear Is Hard To Engageee!!!!!!!!!!!
geezy
05-05-2010, 03:29 PM
God... Here we go again.. i juss fixed my idle problem now i get this crap :no:
:2up: ahh im selling my ef...
anyways.. this problem started today..
once i completly stop and try to put in 1st gear its really hard. i have to force it in..
i dont think is the clutch because it doesnt slip or anything
once i get it going.. all the gears going in easy!???????????
Barefoot
05-05-2010, 04:24 PM
time for a rebuilt or a used 1
geezy
05-05-2010, 04:39 PM
so i need a new clutch
Revmaynard
05-05-2010, 04:42 PM
What motor you running? If it's a d series those trans are a dime a dozen. lolol
Barefoot
05-05-2010, 04:43 PM
so i need a new clutch
no trans
MikeyPrzy
05-05-2010, 04:48 PM
clutch cable, easy fix just turn that knob.
Barefoot
05-05-2010, 04:54 PM
clutch cable, easy fix just turn that knob.
not in just 1 gear
blcksi
05-05-2010, 05:43 PM
To check if it really the clutch, from a stop can you easily put it in 2nd or 3rd? If not I say adjust the clutch or replace.
geezy
05-05-2010, 05:59 PM
clutch cable, easy fix just turn that knob.
To check if it really the clutch, from a stop can you easily put it in 2nd or 3rd? If not I say adjust the clutch or replace.
yeah it will go in 2nd and 3rd and it doesnt slip or grind...
90_ACCORD
05-05-2010, 06:04 PM
well from my experience on here...
I would go with whatever Barefoot says.
geezy
05-05-2010, 06:05 PM
well from my experience on here...
would go with whatever Barefoot says.
i have no money for another tranny :no:
90_ACCORD
05-05-2010, 06:07 PM
i have no money for another tranny :no:
yeah that sucks and is a problem. hope you can get something done about it. good luck.
geezy
05-05-2010, 06:13 PM
yeah that sucks and is a problem. hope you can get something done about it. good luck.
it engages when it wants to.. no grinds doesnt slip or anything
gerardojdm
05-05-2010, 06:14 PM
Check your fluid level or change the fluid. If it continues to do the same then it could possibly be your transmission going bad, springs clutch are broking or broken.. G/L
Black4DrEK
05-07-2010, 07:27 PM
Tranny.
Arm&hammer
05-08-2010, 12:02 PM
Check your fluid level or change the fluid. If it continues to do the same then it could possibly be your transmission going bad, springs clutch are broking or broken.. G/L
this guy is most likely right my prelude does that same thing and when put fluid in it, it goes alot easier
Revmaynard
05-08-2010, 12:37 PM
i have no money for another tranny :no:
Where do you live, and like I asked before, is it a d or b?
geezy
05-08-2010, 08:28 PM
Where do you live, and like I asked before, is it a d or b?
doesnt matter anymore rev. that hatch is long gone now :(
Revmaynard
05-08-2010, 08:32 PM
:( :(
Repiks
05-10-2010, 09:59 AM
Yup.
I got it now.
And I changed the Trans fluid, I think it's the linkage. It def. needs new trans bushings, it wiggles around in gear like it's in neutral.
SPOOLIN
05-10-2010, 12:41 PM
so its fixed?
sounds like the brass shynchro has worn down the stop block that keeps it within its range of circular motion, when that happens, 1 out of 4 times that you try to put it in gear...it will just go fine but the rest of the time and especially at a stop it wont go in for shit lol.
Repiks
05-10-2010, 02:04 PM
No, it's not fixed.
I feel as though the clutch isn't engaging enough, where do I adjust it?
The only reason is it's hard to get in any gear from a stop, and if it's cranked while in gear it wants to move a little.
geezy
05-10-2010, 03:54 PM
No, it's not fixed.
I feel as though the clutch isn't engaging enough, where do I adjust it?
The only reason is it's hard to get in any gear from a stop, and if it's cranked while in gear it wants to move a little.
just adjust the clutch cable dude. turn the white knob on top of the tranny.. i tried but no luck !
Powered by vBulletin® Version 4.2.2 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.