Honda odyssey powered civic!?

[RL...]

I did not know ppl did this swap....is it new or am I just "out of the loop"? Either way it seems badass to me.

225531

225532

[DeeAOne]

becoming pretty common actually. its a guaranteed 13 second car with a stock swap.

[JITB]

becoming pretty common actually. its a guaranteed 13 second car with a stock swap.


alot of money for a 13second swap! could build 15 13sec v6 protege/323s for that much...lol

[DeeAOne]

alot of money for a 13second swap! could build 15 13sec v6 protege/323s for that much...lol

very true. :ninja:

[RL...]

interesting....

[Franco Tirador]

u been out of the loop, they even put that engine into an EF which is a feather a boosted it, that is asking for death right there

[cactusEG]

damn ! 2st time i've seen that...

[Capt._Ron]

Well.....props for doing something a little different but I think it looks bad. Also I bet the car is horribly unbalanced. I would rather spend the money on a K-swap with mods.

[Elbow]

Great 13 seconds, a heavy front end, and a stupid hole in the hood.

For less you could put a K with bolt ons and be faster, plus close your hood. Oh your car would drive on all four wheels too and not do stoppies under hard braking.

[Dirty Octopus™]

Great 13 seconds, a heavy front end, and a stupid hole in the hood.

For less you could put a K with bolt ons and be faster, plus close your hood. Oh your car would drive on all four wheels too and not do stoppies under hard braking.
i must say... i 3/4 agree. i hate the fact that you cant close your hood instead of looking like a FWD 5.0 with a blowa.

[1CleanEg]

its pretty much just similar to the j swaps from the acura cl's. They make mounts to drop the engine lower tho but still gotta modify the engine. But i would do a k swap like others have said.

[burke420]

swap is nice... but the hood is my only issue

[XanRules]

13 seconds?
Big fucking deal. If you're going to dump that kind of time and money into your motor, I want it to either run low 12s or not look like shit.

[big mac]

Accualy thos swaps are cheaper than k series and don't poke out as much on ek's

[AnthonyF]

becoming pretty common actually. its a guaranteed 13 second car with a stock swap.

...that's it? What a waste of time and money not to mention it looks atrocious.

-Ant.


edit-I will admit that car is DAMN sexy..if it didn't have that engine.

[KodyH]

I'd drive it :dunno:

[AV8ter]

It is different lol. Finding the fucking 6spd trans is the biggest bitch in the world. Only came out of Accord v6 6 spds, newer TL 6spds, and the rare as shit CL S 6spd.

But yeah, as others said, I rather spend the money on a cheaper swap/turbo and get the same results, if not better...

[civic gsr]

no hood fuck it

[EL42]

no hood fuck it

yup,i might as well be a full blown jerk about it.lol

[Drummerboy]

its pretty much just similar to the j swaps from the acura cl's. They make mounts to drop the engine lower tho but still gotta modify the engine. But i would do a k swap like others have said.


Isn't this a J series too?

And yes, K20/24-T 6spd swap ftw.

[Da_unknown]

YOU CAN CLOSE UR HOOD NOW........ hasport makes the new mounts to close the hood but it sits so low

[Da_unknown]

http://farm3.static.flickr.com/2488/4185369247_c4654c8d90.jpg

http://farm3.static.flickr.com/2581/4186125672_9bdb32f25e.jpg

http://farm5.static.flickr.com/4046/4204219946_1cb38b64e3.jpg

[Da_unknown]

oh yeah thats on stock suspension and stock tires 175/50/13

[XanRules]

175/50/13?

Daaaaaaaamn.

[Me86Rob]

What is the world coming too, when a Mini-van motor is an upgrade for your sports car?

[RL...]

What is the world coming too, when a Mini-van motor is an upgrade for your sports car?

Since when was the civic a sports car...

[bigs]

What is the world coming too, when a Mini-van motor is an upgrade for your sports car?

a civic is not a sports car...at all.

[WalkS]

It's a dumb swap in my eyes...lol I wouldn't waste my money doing that.

[DeeAOne]

Who cares if it's not a fast as a k swap. I think it's pretty cool. Especially since you can get hasport mounts for it to sit right.

I saw an I/h/e one in a coupe run 13.3 on slicks. I think it's respectable.

[Me86Rob]

a civic is not a sports car...at all.

To a normal person...but the way some people talk about them/mod them....haha. I mean...at least an upgraded engine for my car would be like, a supercharged MR2 motor...not a Sienna motor.

[big mac]

the j swap will be my next build ive decided this for a while and this is my inspiration lol.

http://www.youtube.com/watch?v=7mfsyhCEqwA

[Glides]

Lol you can all go fuck your couches. I'd roll that bitch with no hood, put spikes on all the bolt caps, pain it flat black and laugh my way all the way home.

BEST looking Civic photo i've seen on this site in a long time. At least SOMEONE can think outside of the lip, spring, rota box.

[Z0_o6]

Lol you can all go fuck your couches. I'd roll that bitch with no hood, put spikes on all the bolt caps, pain it flat black and laugh my way all the way home.

BEST looking Civic photo i've seen on this site in a long time. At least SOMEONE can think outside of the lip, spring, rota box.

AMEN. I love how if it's not something that is deemed "clean" then it's automatically shit.

[blown_ss]

Who cares if it's not a fast as a k swap. I think it's pretty cool. Especially since you can get hasport mounts for it to sit right.

I saw an I/h/e one in a coupe run 13.3 on slicks. I think it's respectable.

thats where you are wrong my friend. check out the tl type s j32 which is the same s.wap as this, give or take a number. there is a guy on honda-tech that put down 260ish whp with just headers, intake, and exhaust. show me a k series that can do that. but if this swap blows your mind check out a g23 swap.

[OG-Skinny]

PFFT. SOHC TURBO ALL DAY. OR, even just a stright H22 swap will run 13's. And out the door running, hood closed (if you do it yourself) is 2K.

[blown_ss]

PFFT. SOHC TURBO ALL DAY. OR, even just a stright H22 swap will run 13's. And out the door running, hood closed (if you do it yourself) is 2K.

this is true!

[Mantooth]

AMEN. I love how if it's not something that is deemed "clean" then it's automatically shit.Thinking outside of the box isn't always a good thing. People mimic other people's shit because it looks good, not because they want to be like Joe Blow, for the most part.

With that being said, I thought I had seen it all. This shit takes the cake.:lmfao:

[ItsBlack]

At least SOMEONE can think outside of the lip, spring, rota box.

You say that... yet he still has a lip, springs, and rotas (im guessing)... lol

[Elbow]

All of you thinking that oil pan is low obviously have yet to own an E30.

[Jecht]

Looks incredibly aggressive and awesome.

[Tree]

waste of time and money, and you will have a 60:40

[KevinT707]

Maybe I'm the only one that thinks this swap is nice. Lately I've been really interested in the J-Series swap so I read up on it. Think about it: there are millions of Odyssey (J35/3.5L/240 HP) motors so they are inexpensive, the hard part is getting the hard to find CL tranny which is the 6-SPD LSD to handle all that torque. I haven't personally priced it out but I would definitely say it's cheap than a K-Series swap & it will obviously make more TQ than any K-Series at any RPM.

An H22 making less than 200 WHP can already run low 13s so think about what a J-Series CAN do.

[Glides]

You say that... yet he still has a lip, springs, and rotas (im guessing)... lol

True...but that isn't where he stopped......like most others do.

And Mantooth.....I agreed with that line of thinking except....springs, lip and Rotas just DOESN'T look good. :)

[Genji-Sama]

I don't see a problem. it's not the most cost efficient means of making a 13s car, but personally I thought the engine sticking out of the hood made it look more aggressive, but w/e

[Sammich]

swap is nice... but the hood is my only issue

i've heard that they are suppose to be making mounts for this swap to allow the engine to sit lower without cutting the hood

[bigdare23]

You can close the hood now in EGs/DCs/EKs by swap intake manifolds and valve covers from another J-series motor. Me personally, I think this swaps shits on every other honda swap out there. Why? Because it's relatively cheap (j-series motors are basically given away). I believe you can do this swap for about the same as a gsr swap, and it will shit on a k- and h-series.

My thing is what's up with the hate?!? People bitch about how Honda not having torque. Then when people finally swap in a motor with torque people still bitch. LOL :shakes head:

[Elbow]

To a normal person...but the way some people talk about them/mod them....haha. I mean...at least an upgraded engine for my car would be like, a supercharged MR2 motor...not a Sienna motor.


AMEN. I love how if it's not something that is deemed "clean" then it's automatically shit.


You can close the hood now in EGs/DCs/EKs by swap intake manifolds and valve covers from another J-series motor. Me personally, I think this swaps shits on every other honda swap out there. Why? Because it's relatively cheap (j-series motors are basically given away). I believe you can do this swap for about the same as a gsr swap, and it will shit on a k- and h-series.

My thing is what's up with the hate?!? People bitch about how Honda not having torque. Then when people finally swap in a motor with torque people still bitch. LOL :shakes head:

You do know that HP and torque doesn't mean a good car right?

Any details on the weight, where it mounts, etc?

[HillClimbGuy]

i have een a few ek's with the better mounting kit and it is scary (hell of a sleeper) . only thing is you can only fit a 205 on the front so it will not hook up

[georgieboi]

if the mounts lower the motor isnt that bad for the oil pan, headers every at the bottom??? i rather the hood be cut out then that??:thinking:

[Elbow]

if the mounts lower the motor isnt that bad for the oil pan, headers every at the bottom??? i rather the hood be cut out then that??:thinking:

English translation anyone?

[oneSLOWex]

Hasport has mounts that make this fit under the hood....but you have to use a different subframe. Also, on a stock height car with stock wheels/tires....the oil pan is only 4 inches off the ground.

I would love to do this swap but i think it looks like complete asshole with it sticking out of the hood and its risky as shit with the oilpan being that low. So ill stick to the single jingle I have already. After all...Hondas are slow anyway.

[bigdare23]

You do know that HP and torque doesn't mean a good car right?

Any details on the weight, where it mounts, etc?


Think about it Simon, if you're doing a v6 swap in a Civic/Integra, I doubt you're worried about anything but straight line speed. But never know, with the proper suspension setup and tires, you can make anything turn.

Plus, a good friend of mines has j35 with a 6spd in his Civic coupe and it didn't seem "too" different.

[chameleon30038]

nothing new but must say i have seen them sit lower in the car though.

[KevinT707]

Me personally, I think this swaps shits on every other honda swap out there. Why? Because it's relatively cheap (j-series motors are basically given away). I believe you can do this swap for about the same as a gsr swap, and it will shit on a k- and h-series.

My thing is what's up with the hate?!? People bitch about how Honda not having torque. Then when people finally swap in a motor with torque people still bitch. LOL :shakes head:
Agreed!

[HeLLo iM iZzY]

Great 13 seconds, a heavy front end, and a stupid hole in the hood.

For less you could put a K with bolt ons and be faster, plus close your hood. Oh your car would drive on all four wheels too and not do stoppies under hard braking.
Wrong...wrong...wrong...

It's not even 50 lbs heavier than a K-series...
You can close your hood with the right mounts from Hasport.
I agree K>J series but this is definitely something new and cool.

[HeLLo iM iZzY]

if the mounts lower the motor isnt that bad for the oil pan, headers every at the bottom??? i rather the hood be cut out then that??:thinking:
That's only if you have your ebay coils spun all the way to the bottom, jk.

I'd rather have a decent drop so this motor could fit under my hood then be slammed to the ground and have it sticking out the hood.

[1CleanEg]

the j swap will be my next build ive decided this for a while and this is my inspiration lol.

http://www.youtube.com/watch?v=7mfsyhCEqwA

saw this guys build on H-T Anybody worrying about it on a road course should watch b/c it didnt seem to do to bad and it kept up with that porsche damn well.