90-91 Integra Clutch Pedal Stays To The Ground Doesnt Come Back Up ? SOMEONE HELP

[Uptown401]

i just replaced my clutch, and everything bolted back up, i have replaced many cable tranny clutches but this time i came to a clueless point on what the cause is. When ever i step on the clutch pedal, the pedal stays to the ground and ill have to pull it up with my hands, i checked out the clutch cable line, throw out bearing, the clutch folk release spring and everything is in good working order......even checked the spring under the pedal, all in working order, what could be the problem...?

[Black4DrEK]

Hmmm.. GL with that one man..

IF your sure you checked the things above.. Im stumped at the moment too..

[big mac]

your slave cylinder is out man. this has happened to me

[integra938]

your slave cylinder is out man. this has happened to me

Happen to me on my teg also.

[geezy]

i heard somewhere... that your clutch needs to be bleeeded some how?

[b17a1db2]

it's a cable clutch, there is no slave or master cylinder for the clutch, it's all manually operated with no hydraulic fluid. your problem is not there.

[laokid]

clutch cable broke! or came off

[laokid]

oh nvm lol try adjusting your cable

[james497]

oh nvm lol try adjusting your cable

x2