PDA

View Full Version : G series swap info


jew_boy
04-17-2010, 08:43 AM
I was wondering if anybuddie has got some good info on this or has done it. I know about the HondaTech thread but it doesn't have much info about the F22b1 with the h22 head. But if anyone has any Info it would be nice. Reps also
jew_boy
04-17-2010, 08:00 PM
Well looks like I'm alone on this one
98blackcivic
04-17-2010, 08:16 PM
f23block, k20 pistons, h22 head
best of the 3 world
1NonlyAccord
04-17-2010, 11:40 PM
Its been done quite a few times..alot of people use F23 block with H22 head to keep vtec,But the H23 works just the same.

look up Pirates build threads;
http://www.honda-tech.com/showthread.php?t=1046336&highlight=g23
Drummerboy
04-18-2010, 08:35 AM
Why not go with the JDM F22B? Its an F22A1 block with an H23 head from factory. If you want vtec maybe hunt down a jdm h23 vtec head.
JGilbert312
04-19-2010, 07:53 PM
Usually has the f23 block, k20 type S pistons, and H22 head.

You have to plug 2 oil holes on the bottom of the head because the H22 head has 8 oil drain holes but the f23 block only has 6.
jew_boy
04-19-2010, 10:08 PM
So what about the f22b1 that's what I'm trying to find out. Cause I already have that motor and a a4 head. Can those two not go together or what?
DaRussian
04-19-2010, 10:19 PM
I was wondering if anybuddie has got some good info on this or has done it. I know about the HondaTech thread but it doesn't have much info about the F22b1 with the h22 head. But if anyone has any Info it would be nice. Reps also


one of my friends did that on his prelude. he blew his h22 block so he just slapped the head on a f22 block and it was slow as shit. you can ask him he is on here his name is bb4pimp
jew_boy
04-19-2010, 11:15 PM
Well seeing it is a low comp motor I wouldn't expect it to be to fast but with a nice t3/t4 turbo in a Eg hatch.. Now that will be a fast car
Catnip
04-19-2010, 11:22 PM
Well seeing it is a low comp motor I wouldn't expect it to be to fast but with a nice t3/t4 turbo in a Eg hatch.. Now that will be a fast car

You're so gay. LOL
JGilbert312
04-19-2010, 11:26 PM
So what about the f22b1 that's what I'm trying to find out. Cause I already have that motor and a a4 head. Can those two not go together or what?

I'm sure it is going to be the same on having to plug the holes in the head, but yeah with a t3/t4 i'm sure the car will be nice to drive around and be a fun daily to play with.