AFSil80
04-06-2010, 09:36 PM
Ok folks, I'm trying to clean the garage out before I move in May. I've got a lot of things that I have no need for.
So on to the stuff!
CA18DET timing cover set - $30.00 I have 4 sets.
http://img.photobucket.com/albums/v601/AFSil80/DSC01607.jpg
CA18DET coil pack covers - $10.00/ea Again, I've got too many of these laying around.
http://img.photobucket.com/albums/v601/AFSil80/DSC01608.jpg
CA18DET mass air flow meter - $80.00 Pulled off my car, going N62 so I no longer need this.
http://img.photobucket.com/albums/v601/AFSil80/DSC01614.jpg
KA24E mass air flow meters - $30.00/ea
http://img.photobucket.com/albums/v601/AFSil80/DSC01609.jpg
SR20DET O2 housing - $10.00/ea, CA18 O2 SENSOR IS NOT included!
http://img.photobucket.com/albums/v601/AFSil80/DSC01610.jpg
SR20DET OEM intake tube - $20.00
http://img.photobucket.com/albums/v601/AFSil80/DSC01611.jpg
T2x inlet/outlet pipes, MAF-to-filter adapter plates - $10.00/eahttp://img.photobucket.com/albums/v601/AFSil80/DSC01612.jpg
KA24E starter - $50.00
http://img.photobucket.com/albums/v601/AFSil80/DSC01615.jpg
KA24E alternator - $50.00
http://img.photobucket.com/albums/v601/AFSil80/DSC01616.jpg
XTD 12lb flyhweel for CA18DET - $150.00, THESE GO FOR $180+ on eBay, brand new in the box and includes dowel pins.
http://img.photobucket.com/albums/v601/AFSil80/DSC01619.jpg
CA18DET ECU - $100.00/ea. Unmodified, no aftermarket chip.
http://img.photobucket.com/albums/v601/AFSil80/DSC01622.jpg
T3/T04E .57 trim - $150.00. Been on one car for roughly 50 miles according to previous owner, who I trust. Internally gated, but includes a 5 bolt flange that will nullify that. Also includes a 5 bolt flange that converts to a v-band. ZERO SHAFT PLAY.
http://img.photobucket.com/albums/v601/AFSil80/DSC01620.jpg
http://img.photobucket.com/albums/v601/AFSil80/DSC01621.jpg
S13 tie rod set - $20.00, recommend new outers.
http://img.photobucket.com/albums/v601/AFSil80/DSC01623.jpg
OEM S14 SR20 T28 - $500.00, includes 10psi HKS wastegate actuator ($100 new, currently attached) and I'll also include the factory actuator. Minimal shaft play, about what's expected for a solid, good used turbo.
http://img.photobucket.com/albums/v601/AFSil80/DSC01624.jpg
38mm wastegate, unknown brand - $50.00
http://img.photobucket.com/albums/v601/AFSil80/DSC01625.jpg
OEM CA18DET injectors - $50.00 for the set. 370cc, top fed.
http://img.photobucket.com/albums/v601/AFSil80/DSC01626.jpg
As far as payment and contact info is concerned, PM ME or reply to this thread. Once arrangements are set up through PM's, we'll exchange contact info. I DO NOT take Paypal, and these items are cheap so cash is preferred upon meeting.
So on to the stuff!
CA18DET timing cover set - $30.00 I have 4 sets.
http://img.photobucket.com/albums/v601/AFSil80/DSC01607.jpg
CA18DET coil pack covers - $10.00/ea Again, I've got too many of these laying around.
http://img.photobucket.com/albums/v601/AFSil80/DSC01608.jpg
CA18DET mass air flow meter - $80.00 Pulled off my car, going N62 so I no longer need this.
http://img.photobucket.com/albums/v601/AFSil80/DSC01614.jpg
KA24E mass air flow meters - $30.00/ea
http://img.photobucket.com/albums/v601/AFSil80/DSC01609.jpg
SR20DET O2 housing - $10.00/ea, CA18 O2 SENSOR IS NOT included!
http://img.photobucket.com/albums/v601/AFSil80/DSC01610.jpg
SR20DET OEM intake tube - $20.00
http://img.photobucket.com/albums/v601/AFSil80/DSC01611.jpg
T2x inlet/outlet pipes, MAF-to-filter adapter plates - $10.00/eahttp://img.photobucket.com/albums/v601/AFSil80/DSC01612.jpg
KA24E starter - $50.00
http://img.photobucket.com/albums/v601/AFSil80/DSC01615.jpg
KA24E alternator - $50.00
http://img.photobucket.com/albums/v601/AFSil80/DSC01616.jpg
XTD 12lb flyhweel for CA18DET - $150.00, THESE GO FOR $180+ on eBay, brand new in the box and includes dowel pins.
http://img.photobucket.com/albums/v601/AFSil80/DSC01619.jpg
CA18DET ECU - $100.00/ea. Unmodified, no aftermarket chip.
http://img.photobucket.com/albums/v601/AFSil80/DSC01622.jpg
T3/T04E .57 trim - $150.00. Been on one car for roughly 50 miles according to previous owner, who I trust. Internally gated, but includes a 5 bolt flange that will nullify that. Also includes a 5 bolt flange that converts to a v-band. ZERO SHAFT PLAY.
http://img.photobucket.com/albums/v601/AFSil80/DSC01620.jpg
http://img.photobucket.com/albums/v601/AFSil80/DSC01621.jpg
S13 tie rod set - $20.00, recommend new outers.
http://img.photobucket.com/albums/v601/AFSil80/DSC01623.jpg
OEM S14 SR20 T28 - $500.00, includes 10psi HKS wastegate actuator ($100 new, currently attached) and I'll also include the factory actuator. Minimal shaft play, about what's expected for a solid, good used turbo.
http://img.photobucket.com/albums/v601/AFSil80/DSC01624.jpg
38mm wastegate, unknown brand - $50.00
http://img.photobucket.com/albums/v601/AFSil80/DSC01625.jpg
OEM CA18DET injectors - $50.00 for the set. 370cc, top fed.
http://img.photobucket.com/albums/v601/AFSil80/DSC01626.jpg
As far as payment and contact info is concerned, PM ME or reply to this thread. Once arrangements are set up through PM's, we'll exchange contact info. I DO NOT take Paypal, and these items are cheap so cash is preferred upon meeting.