tuner_dude
03-30-2010, 11:01 AM
well my uncle aka (tegg3r) and I have finally decided to slap "some" goodies on his car. long story short ill let the pics show the details enjoy:goodjob: oh and sorry for the crappy iphone pics:crazy:
started to disconnect all wires and hoses
http://i39.tinypic.com/vpgv3m.jpg
then took the oil pan off to change out the rods and pistons
http://i42.tinypic.com/o8gxau.jpg
head,headers,manifold and all belts are off
http://i42.tinypic.com/11bm4vq.jpg
took the pistons out...
http://i40.tinypic.com/rm0mxi.jpg
old pistons
http://i44.tinypic.com/30xbggz.jpg
got down and dirty and took all four out
http://i44.tinypic.com/118krc3.jpg
out with the old...
http://i40.tinypic.com/ztnw6.jpg
and in with the new...
http://i44.tinypic.com/k9gnfb.jpg
time to put all new ones back in and i must say very shiny:crazy:
http://i41.tinypic.com/14e6q91.jpg
then put in ARP head studs =)
http://i39.tinypic.com/35ncvb6.jpg
waited for some goodies for the head that came in...
http://i43.tinypic.com/2jiqe1.jpg
took everything out to get to the springs and retainers... these were a pain in the ass to install because of the "keepers"
http://i43.tinypic.com/2gxh8c1.jpg
after the springs were in, we slapped the VC back on tighten everything and put it back on the block.. also installed AEM fuel rail, and RC 440 injectors... also clean the crapped out of the manifold
http://i43.tinypic.com/9qv03m.jpg
mounted up the turbo/mani.... had to shave a moon shape thing in the block cause the turbo was touching and was causing the manifold not to fit on one side....
http://i42.tinypic.com/aazq88.jpg
decided to paint the VC... measured and centered the IC for perfect fitment
http://i42.tinypic.com/2njhvo7.jpg
then after we started to get all pipings connected clamps and all tighten this is the final results
http://i40.tinypic.com/e17rzo.jpg
and one more shot....
http://i43.tinypic.com/16c5q12.jpg
hope you guys enjoyed and thanks for looking will have video of her up and running:cheers:
started to disconnect all wires and hoses
http://i39.tinypic.com/vpgv3m.jpg
then took the oil pan off to change out the rods and pistons
http://i42.tinypic.com/o8gxau.jpg
head,headers,manifold and all belts are off
http://i42.tinypic.com/11bm4vq.jpg
took the pistons out...
http://i40.tinypic.com/rm0mxi.jpg
old pistons
http://i44.tinypic.com/30xbggz.jpg
got down and dirty and took all four out
http://i44.tinypic.com/118krc3.jpg
out with the old...
http://i40.tinypic.com/ztnw6.jpg
and in with the new...
http://i44.tinypic.com/k9gnfb.jpg
time to put all new ones back in and i must say very shiny:crazy:
http://i41.tinypic.com/14e6q91.jpg
then put in ARP head studs =)
http://i39.tinypic.com/35ncvb6.jpg
waited for some goodies for the head that came in...
http://i43.tinypic.com/2jiqe1.jpg
took everything out to get to the springs and retainers... these were a pain in the ass to install because of the "keepers"
http://i43.tinypic.com/2gxh8c1.jpg
after the springs were in, we slapped the VC back on tighten everything and put it back on the block.. also installed AEM fuel rail, and RC 440 injectors... also clean the crapped out of the manifold
http://i43.tinypic.com/9qv03m.jpg
mounted up the turbo/mani.... had to shave a moon shape thing in the block cause the turbo was touching and was causing the manifold not to fit on one side....
http://i42.tinypic.com/aazq88.jpg
decided to paint the VC... measured and centered the IC for perfect fitment
http://i42.tinypic.com/2njhvo7.jpg
then after we started to get all pipings connected clamps and all tighten this is the final results
http://i40.tinypic.com/e17rzo.jpg
and one more shot....
http://i43.tinypic.com/16c5q12.jpg
hope you guys enjoyed and thanks for looking will have video of her up and running:cheers: