View Full Version : ***Gangster SR20 Parts Sale***
Capt._Ron
03-21-2010, 09:43 PM
I have some SR stuff that has been sitting in my gargage for a while and I'm ready to move it. I was going to build an SR but I have decided to go another route. All prices are OBO. Feel free to call, text, email, or PM me.
Ron Brazas
(770) 655-5811
[email protected]
Brand New OEM Exhaust Manifold Gasket -$30
222264
Brand New Cometic Multi Layer Steel 90mm head gasket -$50
(package has been opened)
222265
SR20det Redtop head with Supertech Springs and titanium Retainers. Head has had combustion chamber CNC machined to better match with 90 mm pistons -$sold
222268
222267
Next Post contains the more items
Capt._Ron
03-21-2010, 09:58 PM
Power Steering Resevoir w/ Oil Cooler -$20
Tenzo R Steering Wheel and s13 adapter -$40 (not sure of the condition of the adapter)
Brand New Darton Sleeves (86-90mm) - $sold
Venolia Forged 90mm Pistons -$sold
stock redtop MAF - $20
stock sr20 block - $200
Capt._Ron
03-21-2010, 10:00 PM
One more pic of the steering wheel
SicK SilViA
03-22-2010, 12:19 AM
Power Steering Resevoir w/ Oil Cooler -$20
i'll take his where u located ?
Capt._Ron
03-22-2010, 06:59 AM
Barnesville, GA about 1 hour south of Atlanta. I won't be able to deliver for something this cheap but I could meet you at exit 193 to save you some time.
SicK SilViA
03-22-2010, 12:22 PM
ok that will do l'll be free wed all day
Nismo
03-22-2010, 02:43 PM
Does the block have the rotating assy? Or is it just a bare block?
Capt._Ron
03-22-2010, 03:11 PM
Sick Silvia...send me a text and we can pick a meeting time...I'm good after 6 pm on most days
Nismo...I have most of the rotating assembly. The crank was polished and balanced but it must have gotten some water on it because it has a spot of surface rust. The rotating assembly is stock but I do have new main bearings.
xerxesXXVII
03-23-2010, 10:59 AM
interested in the head, pistons and sleeves... PM Sent!
Capt._Ron
03-23-2010, 11:58 AM
sale pending on head, pistons and sleeves
Capt._Ron
03-30-2010, 03:23 PM
head, pistons, and sleeves gone....bump for the other parts
Nismo
03-30-2010, 06:10 PM
Can you get me some pictures of the block and what its going to come with please? Rods/pistons?
Powered by vBulletin® Version 4.2.2 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.