LIKEG6
03-18-2010, 09:19 PM
Here's what we have fellas.
Make - Honda Civic
Year - 1988
Body - hatch
Options - no ps or ac
Mileage - 245k on chassis. Unknown on motor
Vin - last 6 - 030024
Price - $3500 FIRM
88 hatch. Have had it for 3 years and have done a good amount of work to it. Has run a 14.2@93 in the 1/4 with a 1.8 60ft on ebay coilovers and drag radials. 9.0 in the 1/8.
Specs:
Engine -
JDM B16A w/ JDM B16 trans
low comp. pistons - 155psi all the way across
UR lightweight flywheel
AEBS IM
short ram intake
Magstar wires
B&M FPR and fuel pressure gauge
DC header
Full 2.5" exhaust w/ small resonator, magnaflow muffler and tip
Phearable.net ECU
Converted to OBD-1 w/ dizzy
Tucked engine bay
Interior -
B&M Short Shifter
Silver shift knob
Oil pressure guage and A/F guage
Momo steering wheel mounted under Pioneer cd player
ITR rear seats
Del Sol seats w/ blue stripe
Autometer 5" tach shift light in vent
Pioneer cd player with 6.5 up front and 6x9 in the back.
Spoon style cluster
Integra center console
Apexi VAFC
Exterior -
Flat black
Clear bumper lights
Amber corners
90-91 front bumper and tail lights
removed wipers, wiper motors
Spoon replica mirrors
20% tint
Stickered rear center garnish
Suspension -
Skunk2 Coilovers
F&R upper strut bar
C pillar bar
Adjustable front upper control arms
XXR 16x8 +15 wheels 195/45/16 tires. 2 brand new fronts.
Cons -
Needs some struts. Has stocks now.
Side door molding needs replaced. $40 part at Honda.
New hood release cable broke when I installed it but still pops and shuts.
Might be forgetting some things but that should be it!
Thanks for looking!!!
http://i44.tinypic.com/2jalrog.jpg
http://i40.tinypic.com/34859hc.jpg
http://i39.tinypic.com/aaivz4.jpg
http://i39.tinypic.com/2ic2qsy.jpg
http://i39.tinypic.com/11id4yv.jpg
http://i44.tinypic.com/do2oma.jpg
Make - Honda Civic
Year - 1988
Body - hatch
Options - no ps or ac
Mileage - 245k on chassis. Unknown on motor
Vin - last 6 - 030024
Price - $3500 FIRM
88 hatch. Have had it for 3 years and have done a good amount of work to it. Has run a 14.2@93 in the 1/4 with a 1.8 60ft on ebay coilovers and drag radials. 9.0 in the 1/8.
Specs:
Engine -
JDM B16A w/ JDM B16 trans
low comp. pistons - 155psi all the way across
UR lightweight flywheel
AEBS IM
short ram intake
Magstar wires
B&M FPR and fuel pressure gauge
DC header
Full 2.5" exhaust w/ small resonator, magnaflow muffler and tip
Phearable.net ECU
Converted to OBD-1 w/ dizzy
Tucked engine bay
Interior -
B&M Short Shifter
Silver shift knob
Oil pressure guage and A/F guage
Momo steering wheel mounted under Pioneer cd player
ITR rear seats
Del Sol seats w/ blue stripe
Autometer 5" tach shift light in vent
Pioneer cd player with 6.5 up front and 6x9 in the back.
Spoon style cluster
Integra center console
Apexi VAFC
Exterior -
Flat black
Clear bumper lights
Amber corners
90-91 front bumper and tail lights
removed wipers, wiper motors
Spoon replica mirrors
20% tint
Stickered rear center garnish
Suspension -
Skunk2 Coilovers
F&R upper strut bar
C pillar bar
Adjustable front upper control arms
XXR 16x8 +15 wheels 195/45/16 tires. 2 brand new fronts.
Cons -
Needs some struts. Has stocks now.
Side door molding needs replaced. $40 part at Honda.
New hood release cable broke when I installed it but still pops and shuts.
Might be forgetting some things but that should be it!
Thanks for looking!!!
http://i44.tinypic.com/2jalrog.jpg
http://i40.tinypic.com/34859hc.jpg
http://i39.tinypic.com/aaivz4.jpg
http://i39.tinypic.com/2ic2qsy.jpg
http://i39.tinypic.com/11id4yv.jpg
http://i44.tinypic.com/do2oma.jpg