Help with new system amp settings.

[1NonlyAccord]

Just put together my new system. Need some help with the amp settings to get this thing to bump.

1-12" Kicker L5(2ohm)
Hifonics Brutus 1200watt amp(1200x1ohm, 900x2ohm, 450x4ohm)
1.65.C.F, ported box.

As of now I have the sub wired to 1 ohm. The AMP manual says to match the headunit pre-out volts to the gain, My pre-out volts are 2v,so I turned my gain all the way up to 2v.

I have theres available settings;
Low pass:35hz-250hz
Subsonic:15hz-35hz
bass EQ:0-10db
phase:0-180degrees

[blackcrx_si]

the low pass is a filter keep it all the way down and nothing but bass comes out the sub instead of bass and words, so i would keep it down as far as the rest i cant really tell you what to put it on, what i do when i set mine or my friends amps is i get them to turn it up as loud as they listen to it and i mess with it till it sounds right as far as quality and bass, i cant really tell you how you want it to sound. thats the best i can do bro

[redgst97]

Setting amp gains and crossover points without being in/with the car is probably NOT the best way to go about things.....we can guess, but thats about it. You can bring the car by American Radio in Cumming, and I can help you get things right....

[1NonlyAccord]

Thanks guys,I think im just going to have to admit,that the L5 does not compete at all with the L7..That hits alot harder and sounds alot better. o well.. :(

[patrick4588]

just turning the gain all the way up is not right either. your best bet is to have redgst tune it for you. having it properly tuned will make a huge difference.