???? about b series speed sensor

[b20teggyjdm]

ok my speend hand went out and i took the sensor out and it fell apart.my wuestion is can a d series speed sensor work in a b series trannythanks in advanced

[j0nbunklah0m]

i dont think so, but hopefully sumone who knows more about it can tell u

[preferredduck]

if they do i have a spare for my b-series, barefoot may know i have yet to check the parts at certain stores to compare the numbers yet.

[Barefoot]

they are different

[punkr6]

It will work...http://hondaswap.com/general-tech-maintenance/b-series-vs-d-series-vss-128865/

[Barefoot]

It will work...http://hondaswap.com/general-tech-maintenance/b-series-vs-d-series-vss-128865/
cheater

[bam-bam]

I know from personal experience that the d-series mechanical VSS will work in a b-series cable trans. ( bswap in an EF) I've done a couple that way. If you put the two side-by-side there's a slight difference in the depth of the plastic drive gear, but it works just fine.

[ShortGeared]

I know from personal experience that the d-series mechanical VSS will work in a b-series cable trans. ( bswap in an EF) I've done a couple that way. If you put the two side-by-side there's a slight difference in the depth of the plastic drive gear, but it works just fine.

same goes for the electric VSS

[b20teggyjdm]

ok i changed the gear shaft in two diff. sensors and nothing. i unpluged the cluster and pluged it back up. then i looked at the sensor clip looks like theres a little light blue corrosion. and don't want to buy a new one and still not works. if there is anymore ideas would help alot thanks

[preferredduck]

It will work...http://hondaswap.com/general-tech-maintenance/b-series-vs-d-series-vss-128865/

so basically a 96 d-series speed sensor will work on my 99
si
/, i also have the backup sensor etc. i figured there would be a difference.