B16A jdm, aftermarket, B16A3 bottom end, del sol interior, tons of parts!!!!

[r.etheridge]

I have a few del sol interior I would like to get rid of. I can ship at your expense.
part around shifter $25
speaker covers rear $15
grey part between two speaker covers $10
back storage compartments $50
or $60 for all
* B16A parts are below*
http://i49.photobucket.com/albums/f294/etheridge_ryan/delsolinterior3.jpghttp://i49.photobucket.com/albums/f294/etheridge_ryan/delsolinterior2.jpghttp://i49.photobucket.com/albums/f294/etheridge_ryan/delsolinterior1.jpg
http://i49.photobucket.com/albums/f294/etheridge_ryan/delsolinterior.jpg

[r.etheridge]

bump

[r.etheridge]

$70 for everything

[r.etheridge]

pics

[r.etheridge]

more pics

[r.etheridge]

alt. is OBD1($40) and pulley set does not come with it

[r.etheridge]

All parts are for a 99-00 civic Si B16A and are brand new. I do have paypal and can ship. I live in Middle GA
Holley 68mm throttle body part# 112-540 $175
Venom intake manifold M21-333B $225
Arias pistons 82mm dome shaped 311855 on crower rods B93744B $400

[r.etheridge]

i would like more info on those pistons. what else you wanna know? they are 82mm dome shaped, they were custom made for myself because when I bought them, they didnt shelf stock 82mm for B16's. They are brand new along with the rings. Built for compression between 11.5 to 1 and 12.5 to 1. made by arias. pm me if you wanna know anything else

[r.etheridge]

intakemanifold, fuel rail, TB, and injectors $125
used clutch $30
obd 1 alt. in picture above $40

[r.etheridge]

I have a B16A3 bottom end with jdm pistons, rods, and crank. comes will all of that plus oil pump, girdle, oil pan, and picke up, main caps and bolts and whatever else I have layin around that goes to it. The crank may need to be ground( see pics) $160. Will sell with a crank in perfect shape for $240

[r.etheridge]

ttt

[r.etheridge]

I have a B16A head with less than 20k that came off of a 99 civic si j-spec. It has been broke down fully and built back up by fox lake out of ohio. Has manley custom valves DIA; length 4.670, tip;.260 crower titanium springs and retainers part# 68185 for the springs and 87093 for the retainers. Built to take stage 3 cams. It also has a port and polish(the entire head) and a 5 angle valve job and the head has been flow checked and it checked out good. Since the head was rebuilt, it has not been used so everything is brand new. I will throw in a complete upper oem honda gasket and seal set brand new as well. Have over $1100 invested on a brand new head. asking $600

[r.etheridge]

bump

[r.etheridge]

bump

[georgieboi]

you would happen to have the trunk / cargo stuff that go in the trunk would you, like the cardboard that goes over the steelies and the carpet on top of that for a del sol

[civic gsr]

are those piston from a ctr ????

[Jdm94Coupe]

are those piston from a ctr ????

Arias pistons 82mm dome shaped 311855 on crower rods B93744B $450

[r.etheridge]

you would happen to have the trunk / cargo stuff that go in the trunk would you, like the cardboard that goes over the steelies and the carpet on top of that for a del sol no only del sol interior parts i have are the ones you see in the pics

[r.etheridge]

Arias pistons 82mm dome shaped 311855 on crower rods B93744B $450thanks jdm94

[r.etheridge]

bump!!!!

[r.etheridge]

bump

[r.etheridge]

made some changes on prices and added a few things

[r.etheridge]

ttt

[r.etheridge]

weekend bump

[JGilbert312]

bump for looking.. Wish I had the money for that head lol.. GLWS.

[kholla6]

interested in the cams and ecu if still available lmk asap!!!!!

[r.etheridge]

interested in the cams and ecu if still available lmk asap!!!!! yeas I still have them pm me

[93delsol15]

trade ya an ls long block for the piston/ rod combo

[r.etheridge]

sorry man no trades

[ek9boy]

do 100 for the good crankshaft?

[r.etheridge]

yeah I can do that. PM me

[kholla6]

sorry man no trades

you have a pm bro!!!! lmk asap

[r.etheridge]

PM replied

[r.etheridge]

This is what I have left and with new prices
cometic head gasket(new) $50
holley 68mm TB (new) $150
Unorthadox pulley set (new) $120
airmass headers comp blu (new) $100
moroso oil pan w/pick up tube B-series (new) $200
crower connectiong rods on arias pistons 82mm dome shaped w/ rings (new) $400
venom intake manifold b-series (new) $200
head w/ all performance parts installed (new)(read first post in this thread for details) $550
stock crank $75
jdm cams and gears $75
energy suspension motor mount inserts (new) $25
OBD1 alternator $30
JDM valve cover (blue and white powder coated) $150
power steering pump off of civic si 99 $30
complete jdm IM,TB,fuel rail and injectors $100
used clutch and pressure plate stock( 75% left on it) $20
B16A3 block $100
B16A3 piston and rods $50

[r.etheridge]

bump

[sang]

ups for you bro. got n intake yet 4 your d yet?

[r.etheridge]

ups for you bro. got n intake yet 4 your d yet? yeah man my homie that lives in perry gave me his old one the other day but I appericate it.

[sang]

yeah man my homie that lives in perry gave me his old one the other day but I appericate it.

no problem man

[r.etheridge]

ttt

[r.etheridge]

somebody get this head!!!!

[r.etheridge]

ttt