youngpre
03-09-2010, 12:44 AM
I bought this, I was going to tow it behind my U-haul all the way out to Cali, low and behold, I broke it right before the move. I failed to get in fixed in time to take it with me and now, it is being/has been repaired and fixed up. Alas, before I spend a boatload shipping out to California, I thought I'd see how much interest I could get on here.
The car has all the same mods but:
It has a new rear axle (Thanks alot Mr. Tow Truck man, I told him to let me ziptie up the rlca that was hanging loose, but noooo, he didn't want to listen sp.....broked.)
I replaced all the arms underneath with a full package of Isis Arms from Enjuku Racing. (http://www.enjukuracing.com/isis-suspension-package-nissan-240sx-p-8984.html) It had aftermarket arms on there already, I just figured I would go ahead and have spares and buy a whole new set. The spares will gladly be included.
It just got a new starter put on. The old will be included as it simply has a flat spot on the solenoid and maybe someone would like to rebuild it as a spare.
It has new tires all around....brand new
And lastly, the 2 way diff was set to full lock and has since be readjusted to the factory 60% lock.
And to the original mod list....
http://i300.photobucket.com/albums/nn9/360designs/DSC05575.jpg
http://i300.photobucket.com/albums/nn9/360designs/DSC05581.jpg
Exterior mods:
Azko Nobel sikkens custom black paint
Works9 front bumper
Dmax widebody fenders 30mm
Dmax widybody overs 50mm
Bn sports knock off sides and rear bumper
Silvia front end conversion
Jdm silvia trunk lock/emblem with keyset
Gtr grill
Silvia brick headlights
Hids 8k
Sibion carbonfiber hood
Sparco hood pins
Origin tail lights led model
M3 style mini lip wing
Jeep tag bracket
Custom fastners ( zipties) LOL
Vinyl by speedesign
Piaa wipers
Origin jdm rain guards
http://i300.photobucket.com/albums/nn9/360designs/DSC05585.jpg
http://i300.photobucket.com/albums/nn9/360designs/DSC05586.jpg
Engine/drivetrain:
Complete 1jzgte engine swap
R154 tranny upgrade with custom ss line
Koyo rad with dual electric fans on custom temp control module
Ma motorsports mounts and tranny mount
Spec stage 5 6 puck race disk clutch
Weapon r catch can
Walbro 255 pump
Hks silicon lines
Aem intake
Trust downpipe
Custom 3" stainless steel exhaust with dual n1 style tips
NGK plugs
Greddy intercooler and piping
Tial bov
Samco couplers
Custom wiring and fusebox mods
Custom drive shaft
Kazz 2 way diff with high compacity hicas cover
http://i300.photobucket.com/albums/nn9/360designs/DSC05587.jpg
http://i300.photobucket.com/albums/nn9/360designs/DSC05591.jpg
http://i300.photobucket.com/albums/nn9/360designs/DSC05592-1.jpg
Suspension,Brakes,Wheels:
Apexi n1 pro coilovers with pillow ball mounts and camber plates
Cusco sway bar rear
Tein tension rods
Z32 brake master cylinder
all bushing replace with polly front and rear
Nismo front power brace
Kazama subframe collars
Extended wheel studs
Wheel locks
Full set of adjustable rear arms
5 lug swap (gto/attain front hubs,z32 rear)
St front sway bar
Circuit sports front strut brace
Cusco rear strut brace
Rotora 14.1 big brake kit
300zx twin turbo rear brake upgrade with funtional e-brake
all ss brake lines
nagana front brace plates
upgraded tie rods with upgraded Kazama ends
18x9.5 5zigen wheels 20mm offset
15mm wheel spacers front
40mm wheel spacers rear
http://i300.photobucket.com/albums/nn9/360designs/DSC05589.jpg
http://i300.photobucket.com/albums/nn9/360designs/DSC05598.jpg
http://i300.photobucket.com/albums/nn9/360designs/DSC05599.jpg
Interior:
Autopower rollbar
Bride ViosIII bucket
Bride Brackets
Apexi tach and boost gauge
Image oil press,volt,water temp,egt
Aem wideband UEGO
Wrapped glovebox and arm rest
Jdm manual seat belt conversion
RJS 5 point harnesses
Quick release steering hub
JDM 'bling-fuckintastic steering wheel'
Momo pedals
suede door panel inserts
mr. clinging monkey co-pilot
gutted rear
Electronics:
Kenwood headunit
Pioneer speakers
Stinger hareware cables wire etc
Sony inboard camera setup
Alarm:
A good one....
All that being said, I love this car. It is phenomenal and I intended on keeping it for quite some time. Now, I know what it's worth, you know what it's worth. Go ahead and lurk the interwebs to find the old for sale thread if it tickles your pickle. But, if you ARE serious, make an offer. To fend off lowballers, let's say $10500. But, make an offer. I am by no means hurting for money. However, I bought this car I did not build it (And as far as that whole built not bought debate goes; I built a car once, twas fun but twas expensive and twas quite a lengthy process, twas very nice to buy something that was ready to destroy) and as such, I am not ridiculously attatched to it and I figured I would at least try to appease the wife and sell it first and foremost before I paid to have it shipped to me.
Thanks
The car has all the same mods but:
It has a new rear axle (Thanks alot Mr. Tow Truck man, I told him to let me ziptie up the rlca that was hanging loose, but noooo, he didn't want to listen sp.....broked.)
I replaced all the arms underneath with a full package of Isis Arms from Enjuku Racing. (http://www.enjukuracing.com/isis-suspension-package-nissan-240sx-p-8984.html) It had aftermarket arms on there already, I just figured I would go ahead and have spares and buy a whole new set. The spares will gladly be included.
It just got a new starter put on. The old will be included as it simply has a flat spot on the solenoid and maybe someone would like to rebuild it as a spare.
It has new tires all around....brand new
And lastly, the 2 way diff was set to full lock and has since be readjusted to the factory 60% lock.
And to the original mod list....
http://i300.photobucket.com/albums/nn9/360designs/DSC05575.jpg
http://i300.photobucket.com/albums/nn9/360designs/DSC05581.jpg
Exterior mods:
Azko Nobel sikkens custom black paint
Works9 front bumper
Dmax widebody fenders 30mm
Dmax widybody overs 50mm
Bn sports knock off sides and rear bumper
Silvia front end conversion
Jdm silvia trunk lock/emblem with keyset
Gtr grill
Silvia brick headlights
Hids 8k
Sibion carbonfiber hood
Sparco hood pins
Origin tail lights led model
M3 style mini lip wing
Jeep tag bracket
Custom fastners ( zipties) LOL
Vinyl by speedesign
Piaa wipers
Origin jdm rain guards
http://i300.photobucket.com/albums/nn9/360designs/DSC05585.jpg
http://i300.photobucket.com/albums/nn9/360designs/DSC05586.jpg
Engine/drivetrain:
Complete 1jzgte engine swap
R154 tranny upgrade with custom ss line
Koyo rad with dual electric fans on custom temp control module
Ma motorsports mounts and tranny mount
Spec stage 5 6 puck race disk clutch
Weapon r catch can
Walbro 255 pump
Hks silicon lines
Aem intake
Trust downpipe
Custom 3" stainless steel exhaust with dual n1 style tips
NGK plugs
Greddy intercooler and piping
Tial bov
Samco couplers
Custom wiring and fusebox mods
Custom drive shaft
Kazz 2 way diff with high compacity hicas cover
http://i300.photobucket.com/albums/nn9/360designs/DSC05587.jpg
http://i300.photobucket.com/albums/nn9/360designs/DSC05591.jpg
http://i300.photobucket.com/albums/nn9/360designs/DSC05592-1.jpg
Suspension,Brakes,Wheels:
Apexi n1 pro coilovers with pillow ball mounts and camber plates
Cusco sway bar rear
Tein tension rods
Z32 brake master cylinder
all bushing replace with polly front and rear
Nismo front power brace
Kazama subframe collars
Extended wheel studs
Wheel locks
Full set of adjustable rear arms
5 lug swap (gto/attain front hubs,z32 rear)
St front sway bar
Circuit sports front strut brace
Cusco rear strut brace
Rotora 14.1 big brake kit
300zx twin turbo rear brake upgrade with funtional e-brake
all ss brake lines
nagana front brace plates
upgraded tie rods with upgraded Kazama ends
18x9.5 5zigen wheels 20mm offset
15mm wheel spacers front
40mm wheel spacers rear
http://i300.photobucket.com/albums/nn9/360designs/DSC05589.jpg
http://i300.photobucket.com/albums/nn9/360designs/DSC05598.jpg
http://i300.photobucket.com/albums/nn9/360designs/DSC05599.jpg
Interior:
Autopower rollbar
Bride ViosIII bucket
Bride Brackets
Apexi tach and boost gauge
Image oil press,volt,water temp,egt
Aem wideband UEGO
Wrapped glovebox and arm rest
Jdm manual seat belt conversion
RJS 5 point harnesses
Quick release steering hub
JDM 'bling-fuckintastic steering wheel'
Momo pedals
suede door panel inserts
mr. clinging monkey co-pilot
gutted rear
Electronics:
Kenwood headunit
Pioneer speakers
Stinger hareware cables wire etc
Sony inboard camera setup
Alarm:
A good one....
All that being said, I love this car. It is phenomenal and I intended on keeping it for quite some time. Now, I know what it's worth, you know what it's worth. Go ahead and lurk the interwebs to find the old for sale thread if it tickles your pickle. But, if you ARE serious, make an offer. To fend off lowballers, let's say $10500. But, make an offer. I am by no means hurting for money. However, I bought this car I did not build it (And as far as that whole built not bought debate goes; I built a car once, twas fun but twas expensive and twas quite a lengthy process, twas very nice to buy something that was ready to destroy) and as such, I am not ridiculously attatched to it and I figured I would at least try to appease the wife and sell it first and foremost before I paid to have it shipped to me.
Thanks