PDA

View Full Version : A couple of you asked me about this


StreetHazard
03-08-2010, 05:05 PM
Installing a KiddRacing H22 header into a 4th gen prelude.

Mine is the "H2B" which I can only assume it was designed for a H-series swap into a civic.

As you can see I am running all accessories, A/C and Power steering and the header still clears, and it hugs the oil pan nicely.

The down pipe does not clear the prelude crossmember so it had to be notched to fit, but it has "blue-ed up" and I think it looks pretty good in the engine bay!

mainstream performance also installed a full 2.5 in magnaflow exhaust with a hi-flow cat. Thanks to James for hooking me up...even though the prelude bit him on the hand and made him bleed :D.
Glides
03-08-2010, 05:07 PM
Yikes!!! Ground clearance you has none.

Looks good though. Kidd's a good guy.
EL42
03-08-2010, 05:12 PM
damn,well at least your downpipe has more clearance than mine.
StreetHazard
03-08-2010, 05:17 PM
Yikes!!! Ground clearance you has none.

Looks good though. Kidd's a good guy.


I know...i'm going to run bigger sidewalled tires to try and compensate, gain a 1/2 in. or more hopefully.

I hope this is also a good illustration for those that "wanna go low" what you have to deal with.



damn,well at least your downpipe has more clearance than mine.

!!!!!!! :eek: !!!!!!!
EL42
03-08-2010, 05:21 PM
yea..thinkin of goin back to 15's all around
StreetHazard
03-08-2010, 05:30 PM
yea..thinkin of goin back to 15's all around

im running 205-40-16's...Ill probably get some 45 sidewalled tires and raise the coilovers up, this shit is too ridiculous (for me).
MongolPup
03-08-2010, 05:41 PM
Clean engine bay.
Mantooth
03-08-2010, 05:49 PM
Very nice looking engine bay!:goodjob:
D3UC3S
03-08-2010, 09:16 PM
Nice! I loved my Kidd header.

This is the cleanest 4th gen ever. Glad to see that H breathing better:goodjob:
StreetHazard
03-08-2010, 09:27 PM
Nice! I loved my Kidd header.

This is the cleanest 4th gen ever. Glad to see that H breathing better:goodjob:

thanks man! I can feel a noticeable difference, I just need a good tune chipped on Crome and ill be straight for a minute.
D3UC3S
03-08-2010, 10:05 PM
That header sounds great after 5K rpms...only downside is its kinda raspy before that.

Once your chipped and putting down close to 200whp, you will definately be straight!
StreetHazard
03-08-2010, 10:13 PM
That header sounds great after 5K rpms...only downside is its kinda raspy before that.

Once your chipped and putting down close to 200whp, you will definately be straight!


By the power of greyskull, I will have the power......
D3UC3S
03-08-2010, 10:22 PM
:lmfao:
EJdm
03-08-2010, 10:43 PM
LOOKS SWEAT...
D3UC3S
03-08-2010, 11:23 PM
sweat?

does it need a towel?