h22 wiring issue

[jew_boy]

have a prelude with a h22a4 turbo. aem wide band aem 3 bar. got the car it wasn't runnin. nothing worked no batt. Recently built the motor put it in and plugged up wire harness and hooked up the batt and the oil light batt light flickering and a few more lights with the KEY in THE OFF position and these lights were coming on
any one know why? ALSO alot of clicking noise. and flashing lights with the key in my pocket. ecu has hondata has a red light that also stays on with no key in the ignition.

[Starrfire]

Could be a bad ignition switch?

[jew_boy]

Could be a bad ignition switch?

i doult it. it turned over in the begining and then just got worse with out us doing anything. i checked all fuses, there good. every wire seems to be good im really clueless on this

[Starrfire]

Well you have power going to it without the key in the on position so something like a main relay or power to the car in general is F'd.

[jew_boy]

Well you have power going to it without the key in the on position so something like a main relay or power to the car in general is F'd.


alright so i found out something new about the 98 prelude. if it aint got good grounds it will allow the dash light to do that idk why but im good now so you all shal go back to what yall are doing :D

[Franco Tirador]

post pics of that beast

[88civic_hatc]

a ground is always a good thing