PDA

View Full Version : My slobra at steele



1EVILZ
03-01-2010, 04:05 AM
Mods: BBk Cai, O/R xpipe, Slp Mufflers, 3.73's... Still has 100% stock suspension. On 245/45/17 street tires. I will be going back in 2 weeks on some 275 BFG Drag Radials.


My launches were around 2800 each time. I spun the first pass for the 60ft and shifted at 6k in first.


60ft. 2.283
330ft 6.403
1/8 9.529
mph 79.79

1/4 14.310
mph 103.44


2nd pass held 3rd till 7k(crossed the beams and it hit the limiter)

60ft 2.127
330ft 5.886
1/8 8.946
mph 81.18

1/4 13.686
mph 103.84


3rd pass i shifted to 4th at 6800.. should have held 3rd again

60ft 2.051
330ft 5.793
1/8 8.862
mph 81.02

1/4 13.626
mph 103.02


Much better than a week ago. The car is still running rich. Need to finish the bolt ons and get it tuned. (:lmfao:hahaha put that out there for the tuned thread). Next mods: Msd Coils, Msd Wires, Headers, Pulleys and a Sct Handheld w/dyno time.

OnURleft
03-02-2010, 01:18 AM
Hey bud, post this in the Kills section 1/4 slips/times etc. You'll get lots of feedback. Looks great 13.6@103 is spot on, surprised the car didn't trap higher but obviously mileage, humidity and outside temp are huge factors to that equation