PDA

View Full Version : PHENIX DRAG STRIP WANTS TO HOST IMPORT MEET..



JDMTEG1990
02-28-2010, 08:30 PM
owner want to hold a special meet for the import guys.. he says we need alot of people though.. once we have enough hell advertise and we can do it once a month or whatever.. just us imports...:bump:

kr3w108
02-28-2010, 09:06 PM
owner want to hold a special meet for the import guys.. he says we need alot of people though.. once we have enough hell advertise and we can do it once a month or whatever.. just us imports...:bump:
yez sir

LIKEG6
02-28-2010, 10:12 PM
Only thing about that is that it's hard to get everyone to actually commit to something.


I'm down of course though. I can send out the message

JDMTEG1990
02-28-2010, 10:25 PM
ok cool.. i know its kinda hard so its like a trial and error type deal.. but hell worth a shot..

LIKEG6
02-28-2010, 10:32 PM
It's always worth a try especially if a place that mainly caters to domestics actually wants to hold and import event there. It's a huge step forward for around here in my opinion.

-S Double C-
02-28-2010, 10:33 PM
tell em to make it a 1/4 mile track and ill visit nearly every weekend after im done with the blue car otherwise ill be driving a hour to montgomery every weekend to chill with greg and sam from goautoworks or 35 mins to reynolds to chill with jimmy from jjspec lol I personally believe they have plenty of stopping room for a 1/4 mile.

carguy07
02-28-2010, 10:33 PM
how many is a lot? and does "just us imports" mean all tuners?

JDMTEG1990
02-28-2010, 10:44 PM
all tuners.. honda, acura, mitsubisi,mazda, nissan,, no muscle shit..like a import showdown but close to home...

JDMTEG1990
02-28-2010, 10:44 PM
sean come on a 1/8 is plenty for a 10 foot civic lol plus makes you look faster...lol

justnprsh07
03-01-2010, 06:43 PM
Count me in if they would do it often I would build a car just for it

JDMTEG1990
03-01-2010, 08:28 PM
hell yea.. they said like once a month i was like DAMN...

ash7
03-01-2010, 08:37 PM
hell yea.. they said like once a month i was like DAMN...

business must be slow

-jonathan

JDMTEG1990
03-01-2010, 08:44 PM
or he wants to have something new and a new way to make more money.. its all about the paper..

LIKEG6
03-01-2010, 09:26 PM
It's all about the benjamins baby.

ash7
03-01-2010, 09:28 PM
or he wants to have something new and a new way to make more money.. its all about the paper..

so, business might be slow?

:)
-jonathan

JDMTEG1990
03-01-2010, 09:33 PM
always thats why your rolling and pulling fenders..:goodjob:

ash7
03-01-2010, 09:50 PM
always thats why your rolling and pulling fenders..:goodjob:

haha! :) yes sir, i like tools that pay for themselves.

-jonathan

JDMTEG1990
03-01-2010, 09:54 PM
mee too.. you should come run the teg.. i know you got something up your sleeve...

ash7
03-01-2010, 10:01 PM
mee too.. you should come run the teg.. i know you got something up your sleeve...

not really bro - i'm usually more into appearance. :goodjob:

-jonathan

SoLJames95
03-02-2010, 06:44 PM
tell em to make it a 1/4 mile track and ill visit nearly every weekend after im done with the blue car otherwise ill be driving a hour to montgomery every weekend to chill with greg and sam from goautoworks or 35 mins to reynolds to chill with jimmy from jjspec lol I personally believe they have plenty of stopping room for a 1/4 mile.

ehhhhh.... My dad ran his car on that track an ran 5.32 and I said they should make it a quater he said Ummmm no(exact words) lol alot of cars wouldn't have the stopping power to do so. Alot of people have budgets builds with durast brakes and wouldn't be able to make it. Lol

-S Double C-
03-02-2010, 10:13 PM
lol well shit let em go off in the dirt dukes of hazard style them niggahs had no problems turning at 80mph in the dirt. :lmao:

JDMTEG1990
03-02-2010, 10:17 PM
haha theres plenty of room out there ive rode it all the way out..if all else fails bail....:lmfao:

hondalover00
03-02-2010, 10:47 PM
PHASE IV: DESIGN SPECIFICATIONS - DRAG STRIP REQUIREMENTS

Requirement IHRA - National NHRA Top Speed Motorplex Inc.
Facility Size (Dependent on Layout) 200 - 300 Usable Acres Min 100 Acres 138 Acres +
Width (Recommended) 60' 60' (58' + 1' Walls) 60' (58' + 1' Walls)
Width (Minimum) 60' 60' 60' (58' + 1' Walls)
Length (Minimum) Start-Finish 4000' 4000' 4904'
Length (Recommended) Start-Finish 4500' 3960' 4904'
Run Off (Recommended) 200' Not Specified 278'
Run Off (Surface) Sand Not Specified Gravel
Turn Off Gates (1st Used For Emergencies) Not Specified 300 Beyond 1/4 mile 301
Turn Off Gates (For Racers) Not Specified 1320 Beyond 1/4 mile 1321
Turn Off Gates (Amount) Not Specified 3 3 + 1 At The End
Concrete Launch Pads (At Starting Line - Min) 300' 330' 1320'
Concrete Launch Pads (At Starting Line - Rec) 750' 660' (1/8 mile) 1320'
Burnout Box (Location) Not Specified 90' Behind Starting Line 105' Behind Starting Line
Burnout Box (Size) Not Specified Not Specified 10'x6'
Christmas Tree (Location) Not Specified 42' In Front Of Starting Line - 20' ?? 41'8"
Retaining Walls Start-Finish (Width) Not Specified 1' 1'
Retaining Walls Start-Finish (Height) 28" - 1000 ft / 38" To the End Not Specified 28" - 1000 ft / 38" To the End
Retaining Walls Start-Finish Concrete Wall - Double Stack Guardrail Highway Type Concrete Wall
Retaining Walls Start-Finish Adjacent To Track - No Openings Not Specified Adjacent To Track - No Openings
Guardrail Posts (Max Distance) 12'6" Not Specified 12'
Guardrail Posts (Center) 6'3" Not Specified 6'
Guardrail Posts (Max Gap - Under) 2" Not Specified 1"
Staging Lanes (Minimum - Amount) 8 Lanes 6 - 10 Lanes 7 Lanes
Staging Lanes (Minimum - Length) 300' 200' 500'
Staging Lanes (Minimum - Width) Not Specified 10' 9'6" Width + 6" Painted Lines
Crowd Control Fence (Location) Pits - Track - Return Road Pits - Track - Return Road Pits - Track - Return Road
Crowd Control Fence (Location) Not Specified 60' - 80' From Track Minimum
Crowd Control Fence (Location - Burnout - 1/8) 25' Not Specified 25'2"
Crowd Control Fence (Location - 1/8 - Shutdown From Retaining Walls) 50' Not Specified 50'
Crowd Control Fence (Minimum - Height) 4' Not Specified 4'
Perimeter Pit Fencing (Fans & Racers) Recommended Not Specified Installed
Racing Surface (Desired) + / - 1/10" Less Then 1% Grade Change + / - 1/10"
Grand Stands (Minimum - Spectators) 10,000 (State Approved) Not Specified 30,396 State & Federal Approved
Grand Stands (Recommended Angle) Not Specified 10 Degrees 10 Degrees
Grand Stands (Recommended Height) Elevated Above Guardrails Elevated Above Guardrails 4'
Pit Area (Racing Rigs) 800 600 791
Pit Area (Bathroom) Not Specified 2 (One having Showers) 7 (One has Showers)
Pit Area (Minimum Racing Rigs - Paved Parking) 200 out of 800 (5 Acres) Not Specified Fully Paved
Pit Roads (Width) 30' Not Specified 40'
Concession Stands / Restrooms Meet Health Departments Specs Main One Behind Grandstands Meet Health - Inside Grand Stands
Timing Tower / Control Tower Meet the needs of Operations 2-3 Floors (Min) Meets Operations Needs - 3 Levels
Timing Tower - (Angle to The Track) Not Specified 70 Degrees (Jet Cars) 0 Degrees- Raised Platform
Timing Tower - Press Room Suggested Not Specified In Tower
Timing Tower - Elevation Not Specified Minimum 15' 60'
Timing Tower - Working Area Not Specified Minimum 12' x 10' 60' x 18'5"
Timing System Compulink Not Specified Compulink
Fire Equipment (Minimum In Pounds) 50 lbs Not Specified 250lbs
Fire Crew Personal Trained Must Be Present Not Specified 1 In House & Leesburg Fire Dept
Ambulance (Minimum - Amount) 1 Not Specified 1 In House & Leesburg EMT's
Lighting Track, Parking, Pits, Staging Lanes Not Specified Track, Parking, Pits, Staging Lanes
Lighting (First 1320) Distance Between Not Specified 150' 150'
Lighting (Shutdown) Distance Between Not Specified 200' 200'
Lighting (Type) Not Specified 3x - 1000 Watt - 480 Volt - Metal Halide 3x - 1000 Watt - 480 Volt - Metal Halide
Lighting Height of Poles Not Specified 60' 70'
TV Production Truck Hospitality (Minimum) 1 - 220 Volt, 220 Amp Power Not Specified 4 - 220 Volt, 220 Amp Power
Telephone Hook ups (Minimum) 25 Not Specified 75
Telephone Hook ups (Requirements) 50 Not Specified 75
ET Booth (Location) Return Road - Adjacent To Shutdown Not Specified Return Road - Adjacent To Shutdown
Scales Return Road - Adjacent To Shutdown Not Specified Return Road - Adjacent To Shutdown
Impound Area (Inspect Vehicles) Required Not Specified Return Road - Adjacent To Shutdown
Premium Parking for Guests and Sponsors Required Not Specified Adjacent To Handicap Parking
Manufacturers Midway (Display Products) Required Not Specified Yes
Fuel Center Recommended Recommended (Nearby Staging Lanes) Return Road - Nearby Staging Lanes
Compressed Air Not Specified Recommended (Away From Fuel Center) 3 Locations on East Side of Paddock
Scoreboards (Elapse Time & MPH of Each Lane) Required Daktroniks LED Daktronics DR-4883-36-11
Public Address System Required Not Specified Installed
Race Track Surface 1st Layer (Lowest) Not Specified 14" Lime 14" Lime
Race Track Surface 2nd Layer Not Specified 10" Soil Cement 10" Soil Cement
Race Track Surface 3rd Layer (First 1/8) ???" Concrete 9" Concrete 5000psi Minimum 9" Concrete 7500psi Minimum
Race Track Surface 3rd Layer (1/8 to Shutdown) Not Specified 3" Polymer Asphalt Mix 3" Polymer Asphalt Mix
Track Direction Not Specified West - East West - East
Return Road (Width - Minimum) Not Specified 24" Wide + 12' For Time Slip = 36' 24 Wide + 12'6" Express Lane
Return Road (Width - Minimum) Not Specified 20' Minimum 24 Wide
Return Road (Distance From Barrier - Minimum) Not Specified 100' 167'10"
Return Road (Protection) Not Specified Not Specified Concrete Retaining Wall - With Fence
Parking Area (Patrons - Minimum) Not Specified 2000 Spaces A: 3031 B: 5733 C: 20000+
Pull Boxes Not Specified 25' - 30'

Miotu
03-03-2010, 06:31 AM
sound like a good idea, i'll be there reguarly if they do it

VTEC~NO
03-03-2010, 12:39 PM
mee too.. you should come run the teg.. i know you got something up your sleeve...

I wish someone would run my teg.. Its Just an LS...:lmfao:

kr3w108
03-03-2010, 12:44 PM
I wish someone would run my teg.. Its Just an LS...:lmfao:

Just an ls huh.......

ash7
03-03-2010, 12:56 PM
I wish someone would run my teg.. Its Just an LS...:lmfao:

mine too

-jonathan

kr3w108
03-03-2010, 01:00 PM
mine too

-jonathan

Shits weak! :taun:lol

VTEC~NO
03-03-2010, 01:03 PM
My shits weak too!! And it is just an LS, ask anyone.. I was at the track 2 sundays ago.. Red teg with gray primer front end..

LIKEG6
03-03-2010, 02:27 PM
Mine's just an LS too

justnprsh07
03-03-2010, 02:34 PM
Mines just a ls to

SPOOLIN
03-03-2010, 03:15 PM
you would have 2/5 of a mile to stop if it were 1/4. Have fun with that. the standard is slightly more than a half mile to stop. 1/8 mile is fine by me for some testing but every 1/8 mile track around me is a PILE OF SHIT. Steele has about 2700ft of stopping room.

kr3w108
03-03-2010, 03:44 PM
My shits weak too!! And it is just an LS, ask anyone.. I was at the track 2 sundays ago.. Red teg with gray primer front end..

I seen you, not to shabby.

kr3w108
03-03-2010, 03:45 PM
Mines just a ls to
You could only dream.

just a honda
03-03-2010, 06:48 PM
phenix city started out as a 1/4 mile but like the sol guy said the cars got faster and stopping was becoming a problem......
well u say imports but my neon will be there, along with a few more...

just a honda
03-03-2010, 06:50 PM
good thing is that if u have a good amount of people show up and race then u can have a chance to win ur money u spent back plus some more in ur pocket.... it would most likly be like the bike only days that are on saturday...

-S Double C-
03-03-2010, 06:57 PM
you would have 2/5 of a mile to stop if it were 1/4. Have fun with that. the standard is slightly more than a half mile to stop. 1/8 mile is fine by me for some testing but every 1/8 mile track around me is a PILE OF SHIT. Steele has about 2700ft of stopping room.

ours is a pile of shit i wouldnt waste the rubber on my slicks at the local track. BTW i just got ole 70hp d15b2's in my integra and civic

LIKEG6
03-03-2010, 07:33 PM
So anyone have an idea for a date yet so we can see about doing this

SPOOLIN
03-03-2010, 07:40 PM
All 1/8 mile tracks started as 1/4 tracks except a very select few that have been built in the last decade.

VTEC~NO
03-03-2010, 08:18 PM
So anyone have an idea for a date yet so we can see about doing this

Yeah.. the date we do this is when my car is running!!:idb:

justnprsh07
03-03-2010, 09:20 PM
You could only dream.

Yea I've been thinking about upgrateing to one of those ls thingys

kr3w108
03-03-2010, 09:25 PM
Yea I've been thinking about upgrateing to one of those ls thingys
thats a big step forward man, are you sure you are ready?:eek:

justnprsh07
03-04-2010, 07:55 AM
thats a big step forward man, are you sure you are ready?:eek:

Guess we will just half to see

just a honda
03-04-2010, 11:49 AM
yeah i my put a ls in my car also but it will be a ls1

just a honda
03-04-2010, 03:44 PM
also this could be for any car dd race car or fully stock car .. because of the classes will we be runnin the same time over and over not who is fastest leave that for the turbo cars lol

VTEC~NO
03-07-2010, 06:42 PM
yeah i my put a ls in my car also but it will be a ls1

SERIOUSLY!! When we goin do that swap?? Count me in..:goodjob:

just a honda
03-10-2010, 06:46 PM
who did yall talk to about this butterbean aka the guy that talks on the load speaker

VTEC~NO
03-10-2010, 08:02 PM
talked to ya mom!!..

JDMTEG1990
03-11-2010, 04:57 PM
we talked to the owner about it.. not the announcer...

VTEC~NO
03-11-2010, 05:11 PM
we talked to the owner about it.. not the announcer...

thats cool.. dude i am ready for it to be just us imports!!

VTEC~NO
03-11-2010, 05:11 PM
we talked to the owner about it.. not the announcer...

thats cool.. dude i am ready for it to be just us hondas!!

just a honda
03-11-2010, 11:11 PM
thats cool.. dude i am ready for it to be just us hondas!!

to bad the dodge will take the prize :boobies:

VTEC~NO
03-12-2010, 04:18 PM
hahaha u wish.. you honestly think you can win by runnin 9.7's.. your crazy!

just a honda
03-12-2010, 10:12 PM
its only a d 15 with twin vtec heads :ninja:

VTEC~NO
03-13-2010, 08:57 AM
^^^HUH^^^

just a honda
03-13-2010, 04:17 PM
^^^HUH^^^

oh dont play dumb u saw it :yes:

VTEC~NO
03-14-2010, 12:24 PM
oh dont play dumb u saw it :yes:

:lmfao::ninja::ninja::ninja::ninja::ninja::lmfao:

Rayza82
03-18-2010, 02:49 PM
forget makin it a quarter jus fix the potholes in the track lol

just a honda
03-19-2010, 04:03 PM
pot holes in the track umm i think not ...

mr.koupe
03-19-2010, 09:56 PM
wth . ..

ash7
03-19-2010, 10:17 PM
:lmfao::ninja::ninja::ninja::ninja::ninja::lmfao:

Mr. MO VTEC...

i couldn't help but notice how your little "saying" under your name says "DC2 gone VTEC!" .... DC2s are GSRs - DC4s are the LS...

just pointing that out for you bro. :goodjob:
-jonathan

VTEC~NO
03-21-2010, 04:39 PM
really!!?? i didnt know that.. I guess i will have to take the gsr motor out then huh??

-S Double C-
03-21-2010, 05:15 PM
got a full revhard ac compatiable turbo kit for sale cheap wit upgraded parts.

ash7
03-22-2010, 10:06 AM
got a full revhard ac compatiable turbo kit for sale cheap wit upgraded parts.

will you PM me (or list) the parts list?


really!!?? i didnt know that.. I guess i will have to take the gsr motor out then huh??

yep - because DC2s are ALREADY vtec.

-jonathan

-S Double C-
03-22-2010, 11:27 AM
its half a kit now lol tj talked me into parting him the turbo manifold,and turbo.

ash7
03-22-2010, 11:30 AM
its half a kit now lol tj talked me into parting him the turbo manifold,and turbo.

which type of BOV?

-jonathan

-S Double C-
03-22-2010, 02:05 PM
greddy type s replica

Dicer911
04-04-2010, 11:49 AM
Well i will definitly be going to the track hopefully as of next week, when b20vtec conversion completed. Still working out the kinks :-(

VTEC~NO
04-12-2010, 10:39 PM
will you PM me (or list) the parts list?



yep - because DC2s are ALREADY vtec.

-jonathan

nawwww ya think...

mr.koupe
04-12-2010, 11:08 PM
Well i will definitly be going to the track hopefully as of next week, when b20vtec conversion completed. Still working out the kinks :-(
hit me up if you wanna go so we can finally run :goodjob:

kte324
04-13-2010, 07:36 AM
hit me up if you wanna go so we can finally run :goodjob:

I want to run to.

justnprsh07
04-13-2010, 08:18 AM
I want to run to.

I want to go see that k drAg you down the track ....

justnprsh07
04-13-2010, 08:20 AM
Well i will definitly be going to the track hopefully as of next week, when b20vtec conversion completed. Still working out the kinks :-(

Hey who is this

Miotu
04-13-2010, 11:17 AM
if yall are going to the track soon hit me up i want to get an idea of what my new car runs