Dump tube & oil feed line question

[k20ej8]

I have a 3' downpipe coming from my turbo, and a turbonetics wastegate with two flanges, one to connect the manifold & one for the dumptube i believe. I dont have a dump tube so is it ok if i can leave it open?


also on my oil feed adapter on top of my turbo i dont have the oval'ish adapter that mounts into the threads, its just a NPT to AN adapter. Is there support to be a ovalish bracket that goes over it? or is it fine to just run the oil line on it?

here's a pic of how it looks..


http://i62.photobucket.com/albums/h90/jonatell0/DSC02391.jpg


this is how its supposed to look..

http://himni-racing.com/images/oil%20feed%20no%20hole.jpg


am i fine without the bracket that goes over the NPT to AN adapter?

[Da_unknown]

just run a oil feed line to it

[Da_unknown]

yes u need a dumptube

[k20ej8]

k thanks

[dallasb84]

no.....

you will prolly need a restrictor in there.....

a honda fuel rail banjo will thread in there nicely and look pretty good.... splice it in with some fuel injection hose 5/16 should work and put a restrictor inline......


you will need the dump tube like mentioned before because it will give you very noticable negative performance......

[turbomirage]

Can someone explain to me how a dump tube effects your performance, other than it helps route the dumped exhaust else where, so you don't have a huge fireball shot into your engine bay? :thinking:

[jnv255]

Hot exhaust being sucked up by the turbo.

[patrick4588]

definitely need a dump tube. there is a thread on evans tuning about it. some cars gained over 40whp from adding one.

[turbomirage]

definitely need a dump tube. there is a thread on evans tuning about it. some cars gained over 40whp from adding one.

Haha wow... anyone have a link to that thread? I am curious to read that...

[tdurr]

Haha wow... anyone have a link to that thread? I am curious to read that...

x43o5783490758934758934

[ej1boy95]

i wouldjust make the dump tube into the DP. that way u wont have to find a way to route it and u wont have to worry about the flames burning anything

[tdurr]

my flames dont burn nothing in my engine bay...

[ej1boy95]

my flames dont burn nothing in my engine bay...

well im just saying it could happen if u dont route it the right way, or dont make it long enough.

[SPOOLIN]

no restrictor needed on that turbo with a -3

as for the dump tube, you only need one to keep your engine bay sane. an engine bay covered in carbon is impossible to clean up lol.

[tdurr]

no restrictor needed on that turbo with a -3

as for the dump tube, you only need one to keep your engine bay sane. an engine bay covered in carbon is impossible to clean up lol.

yea i just looked at my bay like 2 weeks ago and went into clean mode and i could never figure out wtf this black shit was coming from.. till now haha

[marcos713]

yea i just looked at my bay like 2 weeks ago and went into clean mode and i could never figure out wtf this black shit was coming from.. till now haha

^^^clean mode??? When did this "clean mode" happen lol???

[Drummerboy]

I've got mine ran back into my DP, but i think I want a new DP and a Dump ran along side it until under the car.

[slostang]

i love the sound of a wastegate dumping. that is all.

[SPOOLIN]

my 2 wastegates just shoot at the ground.

[WalkS]

i love the sound of a wastegate dumping. that is all.

I do too, sounds like a different engine when the wastegate opens..haha

This is what I am talking about, 4:00
http://www.youtube.com/watch?v=KLJjW6KGX98

[turbomirage]

my 2 wastegates just shoot at the ground.

X2 :yes:

[tdurr]

^^^clean mode??? When did this "clean mode" happen lol???


u were prob at home stuffing ur face with some mexican food :tongue1:

[Drummerboy]

^ Don't act all high and mighty. We all know you used KFC napkins to clean with. Fried chicken ftw!

[tdurr]

^ Don't act all high and mighty. We all know you used KFC napkins to clean with. Fried chicken ftw!

:lmfao:
damn you!