poll on a coule of questions i am thinking bout doing to my car

[HoNdApOwEr]

okay i am upgrading my engine soon i want to know if a b18c1(gsr) or a high compression b20 engine is the way to go

and also bout moving my battery to trunk i have a 94 civic and was wondering if it is a good idea and if so anybody know a good tutorial

[squirrel]

gsr vtec is the only way to go... on the battery set it in the trunk ground it with 4 to 2 gauge wire. run the 12v 4 to 2 gauge wire to the starter, run a 10 gauge wire from + on the alt. to the starter also one last 10 gauge wire from your main fuse to starter. and its done. have mine done that way and its all good (and u cant tell unless your lookin for the shit.)

[KevinT707]

You want more torque or more top-end power? Overall I like the GSR more.

[seanrg1116]

b20z plus milled gsr head :-)

[HoNdApOwEr]

gsr vtec is the only way to go... on the battery set it in the trunk ground it with 4 to 2 gauge wire. run the 12v 4 to 2 gauge wire to the starter, run a 10 gauge wire from + on the alt. to the starter also one last 10 gauge wire from your main fuse to starter. and its done. have mine done that way and its all good (and u cant tell unless your lookin for the shit.)

okay thanks on that battery info


You want more torque or more top-end power? Overall I like the GSR more.

i want something to make my car faster right now i have a dam d15 auto i really dont car it is to slow


b20z plus milled gsr head :-)

and the b20 is high compression ported and polished it is a really good engine and is seen to pull on the new mustangs and shit

i am later doing a ls vtec swap but for right now i want a bigger engine because i can get the gsr for around 1500 and the b20 for 800 something

[BoostedBoss]

Why not just get the high compression b20, install it, rock out for a little bit, then slap a b16 head on there and have a b20vtec?

[HoNdApOwEr]

Why not just get the high compression b20, install it, rock out for a little bit, then slap a b16 head on there and have a b20vtec?

good idea man i never thought about that but eventually i am wanting a turbo engine and i am getting help from a buddy with it so i wil keep it till then

[Barefoot]

gsr

[civicturbo10]

gsr, fun little engine

[mx5speed]

okay thanks on that battery info



i want something to make my car faster right now i have a dam d15 auto i really dont car it is to slow



and the b20 is high compression ported and polished it is a really good engine and is seen to pull on the new mustangs and shit

i am later doing a ls vtec swap but for right now i want a bigger engine because i can get the gsr for around 1500 and the b20 for 800 something


if you're gonna get a gsr, why you gonna get a ls/vtec later?


go b20/vtec....high compression, more power, more torque and vtec for the same if not less than a gsr.

[Barefoot]

go b20/vtec....high compression, more power, more torque and vtec for the same if not less than a gsr.yah if he just slaps on vtec head on it. if its done right they will cost the same street value to street value.

[mx5speed]

yah if he just slaps on vtec head on it. if its done right they will cost the same street value to street value.


you know most people on here will not do it the right way...lol.

I'd still do b20vtec over gsr anyday.

[Turbodude06]

you know most people on here will not do it the right way...lol.

I'd still do b20vtec over gsr anyday.

^:yes:...... B20:goodjob:

[DC2NR]

It all depends on what you are going to do later on.

IMO I'd go with a GSR for boost.

[HoNdApOwEr]

okay so i am going with the b20 when it is sold and later i want to do an ls vtec because i am going to build a freaking monster of an engine and it is gonna take a while but i am going to do it and then have a fast boosted ls vtec

[EJdm]

if planning on boosting later, go b20....

[HoNdApOwEr]

i am gonna GET THE b20 high comp and slap a type r head on there and it will be a beast for the setup

[JDMGRNAV6]

good luck

and post a build thread when u start

[B20B!Ithink?]

if your wanting boost id say gsr because b20 have ight but slimmer cylinder walls and doesnt rev as high as id like it to. i have b20b block b16 milled head arp head studs and arp rod bolts and still dont wanna bring that bitch past 7.

[B20B!Ithink?]

i have a buddy with a late 90s gsr integra he rebuilt with stock ls shit and boosted it he ran a 14 flat today on street tires whell hoppin and spin all day basically what im sayin is lsvtec boost is pretty quick. its iffy both ways dude

[HoNdApOwEr]

if your wanting boost id say gsr because b20 have ight but slimmer cylinder walls and doesnt rev as high as id like it to. i have b20b block b16 milled head arp head studs and arp rod bolts and still dont wanna bring that bitch past 7.

ight mn i am going to do the high comp block with a type r head man that is what i finally got implanted in my head to do

[NOCLUE]

boosted b20 all day

[punkr6]

if you can afford the gsr get that, you can always boost it later and have the best of both worlds.....

[HoNdApOwEr]

ight i appreciate all yalls help