PDA

View Full Version : jdm twin scroll parts



Camaroz2869c
02-19-2010, 05:04 PM
i bought a jdm twin turbo motor i am putting in my wrx wagon. im stripping it down to a long block and selling the rest.

vf20 a little shaft play but bad seals $20

vf21 a little play good seals $50

twin turbo ej20 exhaust manifold $80

powersteering pump w/resvoir(pulley is bent
from where they pulled the motor) $30

alternator $50

throttle body $25

there will be more but thats off the top of my head along with parts from my old engine. you can call me at 678-755-2272 thanks for looking.

UpSideDownDesi
02-19-2010, 10:10 PM
DIBS i'll take the turbo and manifold, and throttle body.

Camaroz2869c
02-20-2010, 10:59 AM
turbo or turbos its a twin set up. give me a call. need the money finish my car

XanRules
02-20-2010, 12:18 PM
twinscroll =/= twin turbo. Which is it?

Camaroz2869c
02-20-2010, 01:51 PM
its a twin turbo set up from a jdm legacy . the manifold runs from side to side like a usdm but has a turbo on each side of the motor with down pipes on each side. 1 spools for low end and 1 for top end

wazzyatl
02-20-2010, 10:04 PM
steve, its a twin turbo NOT twin scroll.. twin scroll turbos are totally different!
UNLESS your turbos look like this


http://cgi.ebay.com/IHI-VF45-Turbo-Turbocharger-Twin-Scroll-SUBARU-Legacy_W0QQitemZ120498233209QQcmdZViewItemQQptZUK_ CarsParts_Vehicles_CarParts_SM?hash=item1c0e411f79

XanRules
02-21-2010, 01:06 PM
twin scroll is the factory set up thats why the turbos are different sizes but you could use the minfold to do a twin set up.

its a twin turbo set up from a jdm legacy . the manifold runs from side to side like a usdm but has a turbo on each side of the motor with down pipes on each side. they call it twin scroll because 1 spools before the other.
Then it's a sequential twin turbo setup, NOT a twinscroll turbo.

Camaroz2869c
03-02-2010, 05:21 PM
corrected the listing but the headline wouldnt change